SAMBA-TOOL(8)

NAME
samba-tool - Main Samba administration tool.

SYNOPSIS

samba-tool [-h] [-W myworkgroup] [-U user] [-d debuglevel] [--v]

DESCRIPTION

This tool is part of the samba(7) suite.

OPTIONS

Samba-tool consists of many sub-commands, each of which have their own set of options. The options listed in this section are common across several sub-commands.

-h|--help
    Show a help message and exit.

-r|--realm=REALM
    Set the realm for the domain.

    Note that specifying this parameter here will override the realm parameter in the /etc/samba/smb.conf file.

--simple-bind-dn=DN
    DN to use for a simple bind.

--password
    Specify the password on the commandline.

    Be cautious about including passwords in scripts or passing user-supplied values onto the command line. For security it is better to let the Samba client tool ask for the password if needed, or obtain the password once with kinit.

    If --password is not specified, the tool will check the PASSWD environment variable, followed by PASSWD_FD which is expected to contain an open file descriptor (FD) number.

    Finally it will check PASSWD_FILE (containing a file path to be opened). The file should only contain the password. Make certain that the permissions on the file restrict access from unwanted users!

    While Samba will attempt to scrub the password from the process title (as seen in ps), this is after startup and so is subject to a race.

-U|--user=[DOMAIN\]USERNAME[%PASSWORD]
    Sets the SMB username or username and password.

    If %PASSWORD is not specified, the user will be prompted. The client will first check the USER environment variable (which is also permitted to also contain the password separated by a %), then the LOGNAME variable (which is not permitted to contain a password) and if either exists, the value is used. If these environmental variables are not found, the username found in a Kerberos Credentials cache may be used.

    A third option is to use a credentials file which contains the plaintext of the username and password. This option is mainly provided for scripts where the admin does not wish to pass the credentials on the command line or via environment variables. If this method is used, make certain that the permissions on the file restrict access from unwanted users. See the -A for more details.

    Be cautious about including passwords in scripts or passing user-supplied values onto the command line. For security it is better to let the Samba client tool ask for the password if needed, or obtain the password once with kinit.

    While Samba will attempt to scrub the password from the process title (as seen in ps), this is after startup and so is subject to a race.

-W|--workgroup=WORKGROUP
    Set the SMB domain of the username. This overrides the default domain which is the domain defined in smb.conf. If the domain specified is the same as the servers NetBIOS name, it causes the client to log on using the servers local SAM (as opposed to the Domain SAM).

    Note that specifying this parameter here will override the workgroup parameter in the /etc/samba/smb.conf file.

-N|--no-pass
    If specified, this parameter suppresses the normal password prompt from the client to the user. This is useful when accessing a service that does not require a password.

    Unless a password is specified on the command line or this parameter is specified, the client will request a password.

    If a password is specified on the command line and this option is also defined the password on the command line will be silently ignored and no password will be used.

--use-kerberos=desired|required|off
    This parameter determines whether Samba client tools will try to authenticate using Kerberos. For Kerberos authentication you should use DNS names instead of IP addresses when connecting to a service. By default Samba client tools will try to use the default Kerberos credential cache (ccache). In case the ccache does not exist or -U|--user option was specified, clients will ask to enter a password and will obtain a Kerberos ticket (kinit) for you. If you want to use an alternative Kerberos credentical cache, use the --use-krb5-ccache option.

    Note that specifying this parameter here will override the client use kerberos parameter in the /etc/samba/smb.conf file.

--use-krb5-ccache=CCACHE
    Specifies the credential cache location for Kerberos authentication.

    This will enforce --use-kerberos=required.

-A|--authentication-file=filename
    This option allows you to specify a file from which to read the username and password used in the connection. The format of the file is:

        				username = <value>
        				password = <value>
        				domain   = <value>

    Make certain that the permissions on the file restrict access from unwanted users!

-H URL, --URL=URL
    LDB URL for database or target server.

    The URL can either be a plain file path, or use one of the schemes listed here. If a plain path is used, it is treated as if 'tdb://' was used.

    tdb://PATH
        PATH is the location of a TDB database.

    mdb://PATH
        PATH is the location of an LMDB database.

    ldb://PATH
        PATH is the location of an LDB database, in either LMDB or TDB format. The formats will be tried one after another until one succeeds or all fail. It is safe to use this if you don't know the format of the file.

    ldap://HOSTNAME, ldaps://HOSTNAME
        The LDB backend is the named ldap server. ldaps:// wraps the connection in TLS.

    ldapi://SOCKET
        The backend server is a local ldap server using a unix domain socket.

--color=always|never|auto
    use colour if available (default: auto)

--ipaddress=IPADDRESS
    IP address of the server

-s FILE, --configfile=FILE
    Use this smb.conf configuration file.

--color=always|never|auto
    Indicate whether samba-tool should use ANSI colour codes in its output. If 'auto' (the default), samba-tool will use colour when its output is directed toward a terminal, unless the NO_COLOR environment variable is set and non-empty.

    The values 'yes' and 'force' are accepted as synonyms for 'always'; 'no' and 'none' for 'never'; and 'tty' and 'if-tty' for 'auto'.

    Note that asking for colour doesn't mean samba-tool will necessarily be very colourful. Many commands are very monochrome, particularly when successful.

-V, --version
    Display the version number and exit.

-d|--debuglevel=level
    level is an integer from 0 to 10. The default value if this parameter is not specified is 1 for client applications.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will override the log level parameter in the /etc/samba/smb.conf file.

--debug-stdout
    This will redirect debug output to STDOUT. By default all clients are logging to STDERR.

COMMANDS

  computer

Manage computer accounts.

  computer add computername [options]

Add a new computer to the Active Directory Domain.

The new computer name specified on the command is the sAMAccountName, with or without the trailing dollar sign.

--computerou=COMPUTEROU
    DN of alternative location (with or without domainDN counterpart) to default CN=Computers in which new computer object will be created. E.g. 'OU=OUname'.

--description=DESCRIPTION
    The new computer's description.

--ip-address=IP_ADDRESS_LIST
    IPv4 address for the computer's A record, or IPv6 address for AAAA record, can be provided multiple times.

--service-principal-name=SERVICE_PRINCIPAL_NAME_LIST
    Computer's Service Principal Name, can be provided multiple times.

--prepare-oldjoin
    Prepare enabled machine account for oldjoin mechanism.

  computer create computername [options]

Add a new computer. This is a synonym for the samba-tool computer add command and is available for compatibility reasons only. Please use samba-tool computer add instead.

  computer delete computername [options]

Delete an existing computer account.

The computer name specified on the command is the sAMAccountName, with or without the trailing dollar sign.

  computer edit computername

Edit a computer AD object.

The computer name specified on the command is the sAMAccountName, with or without the trailing dollar sign.

--editor=EDITOR
    Specifies the editor to use instead of the system default, or 'vi' if no system default is set.

  computer list

List all computers.

  computer move computername new_parent_dn [options]

This command moves a computer account into the specified organizational unit or container.

The computername specified on the command is the sAMAccountName, with or without the trailing dollar sign.

The name of the organizational unit or container can be specified as a full DN or without the domainDN component.

  computer show computername [options]

Display a computer AD object.

The computer name specified on the command is the sAMAccountName, with or without the trailing dollar sign.

--attributes=USER_ATTRS
    Comma separated list of attributes, which will be printed.

  contact

Manage contacts.

  contact add [contactname] [options]

Add a new contact to the Active Directory Domain.

The name of the new contact can be specified by the first argument 'contactname' or the --given-name, --initial and --surname arguments. If no 'contactname' is given, contact's name will be made up of the given arguments by combining the given-name, initials and surname. Each argument is optional. A dot ('.') will be appended to the initials automatically.

--ou=OU
    DN of alternative location (with or without domainDN counterpart) in which the new contact will be created. E.g. 'OU=OUname'. Default is the domain base.

--description=DESCRIPTION
    The new contact's description.

--surname=SURNAME
    Contact's surname.

--given-name=GIVEN_NAME
    Contact's given name.

--initials=INITIALS
    Contact's initials.

--display-name=DISPLAY_NAME
    Contact's display name.

--job-title=JOB_TITLE
    Contact's job title.

--department=DEPARTMENT
    Contact's department.

--company=COMPANY
    Contact's company.

--mail-address=MAIL_ADDRESS
    Contact's email address.

--internet-address=INTERNET_ADDRESS
    Contact's home page.

--telephone-number=TELEPHONE_NUMBER
    Contact's phone number.

--mobile-number=MOBILE_NUMBER
    Contact's mobile phone number.

--physical-delivery-office=PHYSICAL_DELIVERY_OFFICE
    Contact's office location.

  contact create [contactname] [options]

Add a new contact. This is a synonym for the samba-tool contact add command and is available for compatibility reasons only. Please use samba-tool contact add instead.

  contact delete contactname [options]

Delete an existing contact.

The contactname specified on the command is the common name or the distinguished name of the contact object. The distinguished name of the contact can be specified with or without the domainDN component.

  contact edit contactname

Modify a contact AD object.

The contactname specified on the command is the common name or the distinguished name of the contact object. The distinguished name of the contact can be specified with or without the domainDN component.

--editor=EDITOR
    Specifies the editor to use instead of the system default, or 'vi' if no system default is set.

  contact list [options]

List all contacts.

--full-dn
    Display contact's full DN instead of the name.

  contact move contactname new_parent_dn [options]

This command moves a contact into the specified organizational unit or container.

The contactname specified on the command is the common name or the distinguished name of the contact object. The distinguished name of the contact can be specified with or without the domainDN component.

  contact show contactname [options]

Display a contact AD object.

The contactname specified on the command is the common name or the distinguished name of the contact object. The distinguished name of the contact can be specified with or without the domainDN component.

--attributes=CONTACT_ATTRS
    Comma separated list of attributes, which will be printed.

  contact rename contactname [options]

Rename a contact and related attributes.

This command allows to set the contact's name related attributes. The contact's CN will be renamed automatically. The contact's new CN will be made up by combining the given-name, initials and surname. A dot ('.') will be appended to the initials automatically, if required. Use the --force-new-cn option to specify the new CN manually and --reset-cn to reset this change.

Use an empty attribute value to remove the specified attribute.

The contact name specified on the command is the CN.

--surname=SURNAME
    New surname.

--given-name=GIVEN_NAME
    New given name.

--initials=INITIALS
    New initials.

--force-new-cn=NEW_CN
    Specify a new CN (RDN) instead of using a combination of the given name, initials and surname.

--reset-cn
    Set the CN to the default combination of given name, initials and surname.

--display-name=DISPLAY_NAME
    New display name.

--mail-address=MAIL_ADDRESS
    New email address.

  dbcheck

Check the local AD database for errors.

  delegation

Manage Delegations.

  delegation add-principal accountname principal [options]

Add a principal to msDS-AllowedToActOnBehalfOfOtherIdentity that may delegate to an account.

  delegation del-principal accountname principal [options]

Delete a principal from msDS-AllowedToActOnBehalfOfOtherIdentity so that it may no longer delegate to an account.

  delegation add-service accountname principal [options]

Add a service principal as msDS-AllowedToDelegateTo.

  delegation del-service accountname principal [options]

Delete a service principal as msDS-AllowedToDelegateTo.

  delegation for-any-protocol accountname [(on|off)] [options]

Set/unset UF_TRUSTED_TO_AUTHENTICATE_FOR_DELEGATION (S4U2Proxy) for an account.

  delegation for-any-service accountname [(on|off)] [options]

Set/unset UF_TRUSTED_FOR_DELEGATION for an account.

  delegation show accountname [options]

Show the delegation setting of an account.

  dns

Manage Domain Name Service (DNS).

  dns add server zone name A|AAAA|PTR|CNAME|NS|MX|SRV|TXT data

Add a DNS record.

--allow-existing
    Do not treat an existing record of this name and type as an error. This has no functional change (the new DNS record is not added) but the message and samba-tool return code will not indicate error.

  dns cleanup server name

Clean up DNS records for a host, so that DNS queries no longer return results. Usually this works by marking the records as deleted in the database.

Example: samba-tool dns cleanup dc1 computer.samdom.test.site

  dns delete server zone name A|AAAA|PTR|CNAME|NS|MX|SRV|TXT data

Delete a DNS record.

  dns query server zone name A|AAAA|PTR|CNAME|NS|MX|SRV|TXT|ALL [options] data

Query a name.

  dns roothints server [name] [options]

Query root hints.

  dns serverinfo server [options]

Query server information.

  dns update server zone name A|AAAA|PTR|CNAME|NS|MX|SRV|TXT olddata newdata

Update a DNS record.

  dns zonecreate server zone [options]

Create a zone.

  dns zonedelete server zone [options]

Delete a zone.

  dns zoneinfo server zone [options]

Query zone information.

  dns zonelist server [options]

List zones.

  dns zoneoptions server zone [options]

Manipulate aging options. This is useful in zones using dynamic DNS.

There are options to change records from static to dynamic based on regular expressions or age, which is useful in some cases where the values got mixed up in old versions of Samba.

-n, --dry-run
    Do not actually change anything, but show what would happen.

--client-version=w2k|dotnet|longhorn
    Windows client protocol version. The default is longhorn, which is probably what you want.

--mark-old-records-static=YYYY-MM-DD
    Mark records older than the specified date as static.

--mark-records-static-regex=REGEXP
    Mark records that match the given perl-compatible regular expression as static.

--mark-records-dynamic-regex=REGEXP
    Mark records that match the given perl-compatible regular expression as dynamic.

--aging=0|1
    --aging=1 to enable aging for this zone.

    --aging=0 to disable aging for this zone.

--norefreshinterval=HOURS
    avoid further refreshes for this long after a dynamic update. Set to zero to use the default.

--refreshinterval=HOURS
    Dynamic refresh interval in hours (0: use default)

  domain

Manage Domain.

  domain backup

Create or restore a backup of the domain.

  domain backup offline

Backup (with proper locking) local domain directories into a tar file.

  domain backup online

Copy a running DC's current DB into a backup tar file.

  domain backup rename

Copy a running DC's DB to backup file, renaming the domain in the process.

  domain backup restore

Restore the domain's DB from a backup-file.

  domain auth policy

Manage authentication policies.

  domain auth policy list

List authentication policies on the domain.

-H, --URL
    LDB URL for database or target server.

--json
    View authentication policies as JSON instead of a list.

  domain auth policy view

View an authentication policy on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Name of the authentication policy to view (required).

  domain auth policy create

Create authentication policies on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Name of the authentication policy (required).

--description
    Optional description for the authentication policy.

--protect
    Protect authentication policy from accidental deletion.

    Cannot be used together with --unprotect.

--unprotect
    Unprotect authentication policy from accidental deletion.

    Cannot be used together with --protect.

--audit
    Only audit authentication policy.

    Cannot be used together with --enforce.

--enforce
    Enforce authentication policy.

    Cannot be used together with --audit.

--strong-ntlm-policy
    Strong NTLM Policy (Disabled, Optional, Required).

--user-tgt-lifetime-mins
    Ticket-Granting-Ticket lifetime for user accounts.

--user-allow-ntlm-auth
    Allow NTLM and Interactive NETLOGON SamLogon authentication despite the fact that allowed-to-authenticate-from is in use, which would otherwise restrict the user to selected devices.

--user-allowed-to-authenticate-from
    Conditions a device must meet for users covered by this policy to be allowed to authenticate. While this is a restriction on the device, any conditional ACE rules are expressed as if the device was a user.

    Must be a valid SDDL string without reference to Device keywords.

    Example: O:SYG:SYD:(XA;OICI;CR;;;WD;(Member_of {SID(AU)}))

--user-allowed-to-authenticate-to=SDDL
    This policy, applying to a user account that is offering a service, eg a web server with a user account, restricts which accounts may access it.

    Must be a valid SDDL string. The SDDL can reference both bare (user) and Device conditions.

    SDDL Example: O:SYG:SYD:(XA;OICI;CR;;;WD;(Member_of {SID(AO)}))

--service-tgt-lifetime-mins
    Ticket-Granting-Ticket lifetime for service accounts.

--service-allow-ntlm-auth
    Allow NTLM network authentication when service is restricted to selected devices.

--service-allowed-to-authenticate-from
    Conditions a device must meet for service accounts covered by this policy to be allowed to authenticate. While this is a restriction on the device, any conditional ACE rules are expressed as if the device was a user.

    Must be a valid SDDL string without reference to Device keywords.

    SDDL Example: O:SYG:SYD:(XA;OICI;CR;;;WD;(Member_of {SID(AU)}))

--service-allowed-to-authenticate-to=SDDL
    This policy, applying to a service account (eg a Managed Service Account, Group Managed Service Account), restricts which accounts may access it.

    Must be a valid SDDL string. The SDDL can reference both bare (user) and Device conditions.

    SDDL Example: O:SYG:SYD:(XA;OICI;CR;;;WD;(Member_of {SID(AO)}))

--computer-tgt-lifetime-mins
    Ticket-Granting-Ticket lifetime for computer accounts.

--computer-allowed-to-authenticate-to=SDDL
    This policy, applying to a computer account (eg a server or workstation), restricts which accounts may access it.

    Must be a valid SDDL string. The SDDL can reference both bare (user) and Device conditions.

    SDDL Example: O:SYG:SYD:(XA;OICI;CR;;;WD;(Member_of {SID(AO)}))

  domain auth policy modify

Modify authentication policies on the domain. The same options apply as for domain auth policy create.

  domain auth policy delete

Delete authentication policies on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Name of authentication policy to delete (required).

--force
    Force authentication policy delete even if it is protected.

  domain auth policy user-allowed-to-authenticate-from set

Set the user-allowed-to-authenticate-from property by scenario.

-H, --URL
    LDB URL for database or target server.

--name
    Name of authentication policy.

--by-group=GROUP
    User is allowed to authenticate, if the device they authenticate from is assigned and granted membership of a given GROUP.

--silo=SILO
    User is allowed to authenticate, if the device they authenticate from is assigned and granted membership of a given SILO.

  domain auth policy user-allowed-to-authenticate-to set

Set the user-allowed-to-authenticate-to property by scenario.

-H, --URL
    LDB URL for database or target server.

--name
    Name of authentication policy.

--group=GROUP
    The user account, offering a network service, covered by this policy, will only be allowed access from other accounts that are members of the given GROUP.

--silo=SILO
    The user account, offering a network service, covered by this policy, will only be allowed access from other accounts that are assigned to, granted membership of (and meet any authentication conditions of) the given SILO.

  domain auth policy service-allowed-to-authenticate-from set

Set the service-allowed-to-authenticate-from property by scenario.

-H, --URL
    LDB URL for database or target server.

--name
    Name of authentication policy.

--group=GROUP
    The service account (eg a Managed Service Account, Group Managed Service Account) is allowed to authenticate, if the device it authenticates from is a member of the given GROUP.

--silo=SILO
    The service account (eg a Managed Service Account, Group Managed Service Account) is allowed to authenticate, if the device it authenticates from is assigned and granted membership of a given SILO.

  domain auth policy service-allowed-to-authenticate-to set

Set the service-allowed-to-authenticate-to property by scenario.

-H, --URL
    LDB URL for database or target server.

--name
    Name of authentication policy.

--group=GROUP
    The service account (eg a Managed Service Account, Group Managed Service Account), will only be allowed access by other accounts that are members of the given GROUP.

--silo=SILO
    The service account (eg a Managed Service Account, Group Managed Service Account), will only be allowed access by other accounts that are assigned to, granted membership of (and meet any authentication conditions of) the given SILO.

  domain auth policy computer-allowed-to-authenticate-to set

Set the computer-allowed-to-authenticate-to property by scenario.

-H, --URL
    LDB URL for database or target server.

--name
    Name of authentication policy.

--group=GROUP
    The computer account (eg a server or workstation), will only be allowed access by other accounts that are members of the given GROUP.

--silo=SILO
    The computer account (eg a server or workstation), will only be allowed access by other accounts that are assigned to, granted membership of (and meet any authentication conditions of) the given SILO.

  domain auth silo

Manage authentication silos.

  domain auth silo list

List authentication silos on the domain.

-H, --URL
    LDB URL for database or target server.

--json
    View authentication silos as JSON instead of a list.

  domain auth silo view

View an authentication silo on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Name of the authentication silo to view (required).

  domain auth silo create

Create authentication silos on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Name of the authentication silo (required).

--description
    Optional description for the authentication silo.

--user-authentication-policy
    User account authentication policy.

--service-authentication-policy
    Managed service account authentication policy.

--computer-authentication-policy
    Computer authentication policy.

--protect
    Protect authentication silo from accidental deletion.

    Cannot be used together with --unprotect.

--unprotect
    Unprotect authentication silo from accidental deletion.

    Cannot be used together with --protect.

--audit
    Only audit silo policies.

    Cannot be used together with --enforce.

--enforce
    Enforce silo policies.

    Cannot be used together with --audit.

  domain auth silo modify

Modify authentication silos on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Name of the authentication silo (required).

--description
    Optional description for the authentication silo.

--user-authentication-policy
    User account authentication policy.

--service-authentication-policy
    Managed service account authentication policy.

--computer-authentication-policy
    Computer authentication policy.

--protect
    Protect authentication silo from accidental deletion.

    Cannot be used together with --unprotect.

--unprotect
    Unprotect authentication silo from accidental deletion.

    Cannot be used together with --protect.

--audit
    Only audit silo policies.

    Cannot be used together with --enforce.

--enforce
    Enforce silo policies.

    Cannot be used together with --audit.

  domain auth silo delete

Delete authentication silos on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Name of authentication silo to delete (required).

--force
    Force authentication silo delete even if it is protected.

  domain auth silo member grant

Grant a member access to an authentication silo.

-H, --URL
    LDB URL for database or target server.

--name
    Name of authentication silo (required).

--member
    Member to grant access to the silo (DN or account name).

  domain auth silo member list

List members in an authentication silo.

-H, --URL
    LDB URL for database or target server.

--name
    Name of authentication silo (required).

--json
    View members as JSON instead of a list.

  domain auth silo member revoke

Revoke a member from an authentication silo.

-H, --URL
    LDB URL for database or target server.

--name
    Name of authentication silo (required).

--member
    Member to revoke from the silo (DN or account name).

  domain claim claim-type list

List claim types on the domain.

-H, --URL
    LDB URL for database or target server.

--json
    View claim types as JSON instead of a list.

  domain claim claim-type view

View a single claim type on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Display name of claim type to view (required).

  domain claim claim-type create

Create claim types on the domain.

-H, --URL
    LDB URL for database or target server.

--attribute
    Attribute of claim type to create (required).

--class
    Object classes to set claim type to.

    Example: --class=user --class=computer

--name
    Optional display name or use attribute name.

--description
    Optional description or use from attribute.

--enable
    Enable claim type.

    Cannot be used together with --disable.

--disable
    Disable claim type.

    Cannot be used together with --enable.

--protect
    Protect claim type from accidental deletion.

    Cannot be used together with --unprotect.

--unprotect
    Unprotect claim type from accidental deletion.

    Cannot be used together with --protect.

  domain claim claim-type modify

Modify claim types on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Display name of claim type to modify (required).

--class
    Object classes to set claim type to.

    Example: --class=user --class=computer

--description
    Set the claim type description.

--enable
    Enable claim type.

    Cannot be used together with --disable.

--disable
    Disable claim type.

    Cannot be used together with --enable.

--protect
    Protect claim type from accidental deletion.

    Cannot be used together with --unprotect.

--unprotect
    Unprotect claim type from accidental deletion.

    Cannot be used together with --protect.

  domain claim claim-type delete

Delete claim types on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Display name of claim type to delete (required).

--force
    Force claim type delete even if it is protected.

  domain claim value-type list

List claim value types on the domain.

-H, --URL
    LDB URL for database or target server.

--json
    View claim value types as JSON instead of a list.

  domain claim value-type view

View a single claim value type on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Display name of claim value type to view (required).

  domain classicupgrade [options] classic_smb_conf

Upgrade from Samba classic (NT4-like) database to Samba AD DC database.

  domain dcpromo dnsdomain [DC|RODC] [options]

Promote an existing domain member or NT4 PDC to an AD DC.

  domain demote

Demote ourselves from the role of domain controller.

  domain exportkeytab keytab [options]

Dumps Kerberos keys of the domain into a keytab.

  domain functionalprep [options]

Prepare a domain for functional level upgrade. If --functional-level is not used, the latest supported version is used (currently 2016).

There are two aspects to this preparation, relating to the forest and the domain. By default both are run. If either of --forest-prep or --domain-prep are used, only the corresponding preparation is made. If both arguments are used together, all preparation is done, just as when neither is used.

-H, --URL
    LDB URL for database or target server.

--functional-level [2008_R2|2012|2012_R2|2016]
    The functional level to prepare for. The default is 2016.

--forest-prep
    Run forest preparation only (unless --domain-prep is also used).

--domain-prep
    Run domain preparation only (unless --forest-prep is also used).

  domain info ip_address [options]

Print basic info about a domain and the specified DC.

  domain join dnsdomain [DC|RODC|MEMBER|SUBDOMAIN] [options]

Join a domain as either member or backup domain controller.

  domain kds root-key

Manage Key Distribution Service root keys.

  domain kds root-key create [options]

Create KDS root keys

-H, --URL
    LDB URL for database or target server.

--use-start-time=["now"|iso8601 or LDIF time string]
    The key will be valid from this time.

    Valid time format are the string "now", the LDIF format YYYYmmddHHMMSS.0Z, or the ISO format YYYY-mm-dd[*HH[:MM[:SS[.fff[fff]]]][+HH:MM[:SS[.ffffff]]]] where the '*' can be any character, and the optional last '[+HH:MM[:SS[.ffffff]]]' is a timezone offset (e.g. '+00:00' for UTC).

--json
    Output results in JSON format.

  domain kds root-key delete --name={GUID}

Delete the named KDS root key. Use samba-tool domain kds root-key list to find the name of the key.

-H, --URL
    LDB URL for database or target server.

--name=NAME
    The name of the key to delete. It will be a GUID.

-v, --verbose
    Print all attributes (except secret ones, unless --show secrets is used).

--json
    Output results in JSON format.

  domain kds root-key list [options]

List KDS root keys. The newest keys are listed first.

-H, --URL
    LDB URL for database or target server.

--show-secrets
    Print secret or potentially sensitive attributes, namely msKds-RootKeyData and msKds-SecretAgreementParam.

-v, --verbose
    Print more attributes (but not secret ones, unless --show secrets is also used).

--json
    Output results in JSON format.

  domain kds root-key view [options]

View a KDS root key. The default output is similar to that of samba-tool domain kds root-key list --verbose, but with only one key show. The key can be selected by using --latest for the most recent key, or --name to select a key by name.

-H, --URL
    LDB URL for database or target server.

--latest
    View the most recent root key.

--name=NAME
    The name of the key to view. It will be a GUID.

-v, --verbose
    Print all attributes (except secret ones, unless --show secrets is used). This includes attributes that are only useful for LDB bookkeeping.

--json
    Output results in JSON format.

  domain leave [options]

Run on a domain member, this will cause it to leave the domain.

To remove a domain server from the domain, you first need samba-tool domain demote.

--keep-account
    Disable the machine account instead of deleting it.

  domain level show|raise options [options]

Show/raise domain and forest function levels.

  domain passwordsettings set options [options]

Set password settings, including complexity requirements, lockout policy, history length, minimum password length, and minimum and maximum password age on a Samba AD DC server.

Use against a Windows DC is possible, but group policy will override it.

-H URL, --URL=URL
    LDB URL for database or target server

-q, --quiet
    Be quiet

--complexity=COMPLEXITY
    The password complexity (on | off | default). Default is 'on'

--store-plaintext=STORE_PLAINTEXT
    Store plaintext passwords where account have 'store passwords with reversible encryption' set (on | off | default). Default is 'off'

--history-length=HISTORY_LENGTH
    The password history length (integer | default). Default is 24.

--min-pwd-length=MIN_PWD_LENGTH
    The minimum password length (integer | default). Default is 7.

--min-pwd-age=MIN_PWD_AGE
    The minimum password age (number of days | default). Default is 1.

--max-pwd-age=MAX_PWD_AGE
    The maximum password age (number of days | default). Default is 43.

--account-lockout-duration=ACCOUNT_LOCKOUT_DURATION
    The length of time an account is locked out after exceeding the limit on bad password attempts (number of minutes | default). Default is 30 mins.

--account-lockout-threshold=ACCOUNT_LOCKOUT_THRESHOLD
    The number of bad password attempts allowed before locking out the account (integer | default). Default is 0 (never lock out).

--reset-account-lockout-after=RESET_ACCOUNT_LOCKOUT_AFTER
    After this time is elapsed, the recorded number of attempts restarts from zero (integer | default). Default is 30.

  domain passwordsettings show options [options]

Display current password settings for the domain.

-H URL, --URL=URL
    LDB URL for database or target server

  domain passwordsettings pso

Manage fine-grained Password Settings Objects (PSOs).

  domain passwordsettings pso apply pso-name user-or-group-name [options]

Applies a PSO's password policy to a user or group.

  domain passwordsettings pso create pso-name precedence [options]

Creates a new Password Settings Object (PSO).

  domain passwordsettings pso delete pso-name [options]

Deletes a Password Settings Object (PSO).

  domain passwordsettings pso list [options]

Lists all Password Settings Objects (PSOs).

  domain passwordsettings pso set pso-name [options]

Modifies a Password Settings Object (PSO).

  domain passwordsettings pso show user-name [options]

Displays a Password Settings Object (PSO).

  domain passwordsettings pso show-user pso-name [options]

Displays the Password Settings that apply to a user.

  domain passwordsettings pso unapply pso-name user-or-group-name [options]

Updates a PSO to no longer apply to a user or group.

  domain provision

Promote an existing domain member or NT4 PDC to an AD DC.

  domain schemaupgrade [options]

Upgrade the schema.

-H, --URL
    LDB URL for database or target server.

--schema [2012|2012_R2|2016|2019]
    Upgrade to this Windows schema level. The default is 2019.

--ldf-file
    Apply the schema changes in this LDIF file, rather than updating to a standard schema level.

--base-dir
    Specify an alternate location to find schema LDIF files.

  domain tombstones expunge NC [NC [...]] [options]

-H URL, --URL=URL
    LDB URL for database or target server

--current-time=YYYY-MM-DD
    The current time to evaluate the tombstone lifetime from, expressed as YYYY-MM-DD

--tombstone-lifetime=DAYS
    Number of days a tombstone should be preserved for

  domain trust

Domain and forest trust management.

  domain trust create DOMAIN options [options]

Create a domain or forest trust.

  domain trust modify DOMAIN options [options]

Modify a domain or forest trust.

  domain trust delete DOMAIN options [options]

Delete a domain trust.

  domain trust list options [options]

List domain trusts.

  domain trust namespaces [DOMAIN] options [options]

Manage forest trust namespaces.

  domain trust show DOMAIN options [options]

Show trusted domain details.

  domain trust validate DOMAIN options [options]

Validate a domain trust.

  drs

Manage Directory Replication Services (DRS).

  drs bind

Show DRS capabilities of a server.

  drs clone-dc-database dnsdomain
  --targetdir=DIR [options]"

Replicate an initial clone of domain, but DO NOT JOIN it.

--server=DC
    Clone this DC.

--targetdir=TARGETDIR
    where to store provision (required).

-q, --quiet
    Be quiet.

--include-secrets
    Also replicate secret values.

--backend-store=BACKENDSTORE
    Specify the database backend to be used (default is tdb).

--backend-store-size=SIZE
    Specify the size of the backend database, currentlyonly supported by lmdb backends (default is 8 GB).

  drs uptodateness [options]

Show uptodateness status.

-H URL, --URL=URL
    LDB URL for database or target server

-p PARTITION, --partition=PARTITION
    restrict to this partition

--json
    Print data in json format

--maximum
    Print maximum out-of-date-ness only

--median
    Print median out-of-date-ness only

--full
    Print full out-of-date-ness data

  drs kcc

Trigger knowledge consistency center run.

  drs options

Query or change options for NTDS Settings object of a domain controller.

  drs replicate destination_DC source_DC NC [options]

Replicate a naming context between two DCs.

  drs showrepl

Show replication status. The [--json] option results in JSON output, and with the [--summary] option produces very little output when the replication status seems healthy.

  dsacl

Administer DS ACLs

  dsacl delete

Delete an access list entry on a directory object.

  dsacl get

Print access list on a directory object.

  dsacl set

Modify access list on a directory object.

  forest

Manage Forest configuration.

  forest directory_service

Manage directory_service behaviour for the forest.

  forest directory_service dsheuristics VALUE

Modify dsheuristics directory_service configuration for the forest.

  forest directory_service show

Show current directory_service configuration for the forest.

  fsmo

Manage Flexible Single Master Operations (FSMO).

  fsmo seize [options]

Seize the role.

  fsmo show

Show the roles.

  fsmo transfer [options]

Transfer the role.

  gpo

Manage Group Policy Objects (GPO).

  gpo aclcheck [options]

Create an empty GPO.

Check all GPOs have matching LDAP and DS ACLs.

-H URL, --URL=URL
    LDB URL for database or target server

  gpo admxload [options]

Loads samba admx files to sysvol

-H URL, --URL=URL
    LDB URL for database or target server

--admx-dir=ADMX_DIR
    Directory where admx templates are stored

  gpo backup gpo[options]

Backup a GPO.

-H H
    LDB URL for database or target server

--tmpdir=TMPDIR
    Temporary directory for copying policy files

--generalize
    Generalize XML entities to restore

--entities=ENT_FILE
    File to export defining XML entities for the restore

  gpo create displayname [options]

Create an empty GPO.

  gpo cse list

List the registered Client Side Extensions (CSEs) on the current host.

  gpo cse register cse_file cse_name [options]

Register a Client Side Extension (CSE) on the current host.

This command takes a CSE filename as an argument, and registers it for applying policy on the current host. This is not necessary for CSEs which are distributed with the current version of Samba, but is useful for installing experimental CSEs or custom built CSEs.

The cse_file argument MUST be a permanent location for the CSE. The register command does not copy the file to some other directory. The samba-gpupdate command will execute the CSE from the exact location specified from this command.

--machine
    Whether to register the CSE as Machine policy

--user
    Whether to register the CSE as User policy

  gpo cse unregister GUID

Unregister a Client Side Extension (CSE) from the current host.

This command takes a unique GUID as an argument (representing a registered CSE), and unregisters it for applying policy on the current host. Use the `samba-tool gpo cse list` command to determine the unique GUIDs of CSEs.

  gpo del gpo [options]

Delete GPO.

  gpo dellink container_dn gpo [options]

Delete GPO link from a container.

  gpo fetch gpo [options]

Download a GPO.

  gpo getinheritance container_dn [options]

Get inheritance flag for a container.

  gpo getlink container_dn [options]

List GPO Links for a container.

  gpo list username [options]

List GPOs for an account.

  gpo listall

List all GPOs.

  gpo listcontainers gpo [options]

List all linked containers for a GPO.

  gpo load gpo [options]

Load policies onto a GPO.

Reads json from standard input until EOF, unless a json formatted file is provided via --content.

Example json_input:

    [
        {
            "keyname": "Software\Policies\Mozilla\Firefox\Homepage",
            "valuename": "StartPage",
            "class": "USER",
            "type": "REG_SZ",
            "data": "homepage"
        },
        {
            "keyname": "Software\Policies\Mozilla\Firefox\Homepage",
            "valuename": "URL",
            "class": "USER",
            "type": "REG_SZ",
            "data": "google.com"
        },
        {
            "keyname": "Software\Microsoft\Internet Explorer\Toolbar",
            "valuename": "IEToolbar",
            "class": "USER",
            "type": "REG_BINARY",
            "data": [0]
        },
        {
            "keyname": "Software\Policies\Microsoft\InputPersonalization",
            "valuename": "RestrictImplicitTextCollection",
            "class": "USER",
            "type": "REG_DWORD",
            "data": 1
        }
        ]

Valid class attributes: MACHINE|USER|BOTH Data arrays are interpreted as bytes.

The --machine-ext-name and --user-ext-name options are multi-value inputs which respectively set the gPCMachineExtensionNames and gPCUserExtensionNames ldap attributes on the GPO. These attributes must be set to the correct GUID names for Windows Group Policy to work correctly. These GUIDs represent the client side extensions to apply on the machine. Linux Group Policy does not enforce this constraint. {35378EAC-683F-11D2-A89A-00C04FBBCFA2} is provided by default, which enables most Registry policies.

-H H
    LDB URL for database or target server

--content=CONTENT
    JSON file of policy inputs

--machine-ext-name=MACHINE_EXTS
    A machine extension name to add to gPCMachineExtensionNames

--user-ext-name=USER_EXTS
    A user extension name to add to gPCUserExtensionNames

--replace
    Replace the existing Group Policies, rather than merging

  gpo manage security list gpo [options]

List Samba Security Group Policy from the sysvol.

This command lists security settings from the sysvol that will be applied to winbind clients. These settings only apply to the AD DC.

Example:

    samba-tool gpo manage security list {31B2F340-016D-11D2-945F-00C04FB984F9}

-H URL, --URL=URL
    LDB URL for database or target server

  gpo manage security set gpo [options]

Set Samba Security Group Policy to the sysvol.

This command sets a security setting to the sysvol for applying to winbind clients. Not providing a value will unset the policy. These settings only apply to the AD DC.

Example:

    samba-tool gpo manage security set {31B2F340-016D-11D2-945F-00C04FB984F9} MaxTicketAge 10

Possible policies:

MaxTicketAge
    Maximum lifetime for user ticket (hours).

MaxServiceAge
    Maximum lifetime for service ticket in minutes. Defined in minutes

MaxRenewAge
    Maximum lifetime for user ticket renewal, in minutes.

MinimumPasswordAge
    Minimum password age, in days.

MaximumPasswordAge
    Maximum password age, in days.

MinimumPasswordLength
    Minimum password length, in characters.

PasswordComplexity
    Password must meet complexity requirements. 1 is Enabled, 0 is Disabled.

-H URL, --URL=URL
    LDB URL for database or target server

List Samba Security Group Policy from the sysvol.

This command lists security settings from the sysvol that will be applied to winbind clients. These settings only apply to the AD DC.

Example:

    samba-tool gpo manage security list {31B2F340-016D-11D2-945F-00C04FB984F9}

-H URL, --URL=URL
    LDB URL for database or target server

  gpo manage smb_conf list

List smb.conf settings from the sysvol that will be applied to winbind clients.

Example:

    samba-tool gpo manage smb_conf list {31B2F340-016D-11D2-945F-00C04FB984F9}

-H URL, --URL=URL
    LDB URL for database or target server

  gpo manage smb_conf set gpo [value] [options]

Set or unset an smb.conf setting to the sysvol for applying to winbind clients.

If a value is provided, that is the smb.conf value used; if no value is provided, the policy is removed.

Example:

    samba-tool gpo manage smb_conf set {31B2F340-016D-11D2-945F-00C04FB984F9} 'apply gpo policies' yes

-H URL, --URL=URL
    LDB URL for database or target server

  gpo setinheritance container_dn block|inherit [options]

Set inheritance flag on a container.

  gpo setlink container_dn gpo [options]

Add or Update a GPO link to a container.

  gpo removegpo [options]

Show information for a GPO.

Remove policies from a GPO.

Reads json from standard input until EOF, unless a json formatted file is provided via --content.

    Example json_input:
    [
        {
            "keyname": "Software\Policies\Mozilla\Firefox\Homepage",
            "valuename": "StartPage",
            "class": "USER",
        },
        {
            "keyname": "Software\Policies\Mozilla\Firefox\Homepage",
            "valuename": "URL",
            "class": "USER",
        },
        {
            "keyname": "Software\Microsoft\Internet Explorer\Toolbar",
            "valuename": "IEToolbar",
            "class": "USER"
        },
        {
            "keyname": "Software\Policies\Microsoft\InputPersonalization",
            "valuename": "RestrictImplicitTextCollection",
            "class": "USER"
        }
    ]

Valid class attributes: MACHINE|USER|BOTH

-H H
    LDB URL for database or target server

--content=CONTENT
    JSON file of policy inputs

--machine-ext-name=MACHINE_EXTS
    A machine extension name to remove from gPCMachineExtensionNames

--user-ext-name=USER_EXTS
    A user extension name to remove from gPCUserExtensionNames

--color=always|never|auto
    use colour if available (default: auto)

  gpo restore displayname backup location [options]

Restore a GPO to a new container.

-H H
    LDB URL for database or target server

--tmpdir=TMPDIR
    Temporary directory for copying policy files

--entities=ENTITIES
    File defining XML entities to insert into DOCTYPE header

--restore-metadata
    Keep the old GPT.INI file and associated version number

  gpo show gpo [options]

Show information for a GPO.

  gpo manage symlink list

List VGP Symbolic Link Group Policy from the sysvol

  gpo manage symlink add

Adds a VGP Symbolic Link Group Policy to the sysvol

  gpo manage symlink remove

Removes a VGP Symbolic Link Group Policy from the sysvol

  gpo manage files list

List VGP Files Group Policy from the sysvol

  gpo manage files add

Add VGP Files Group Policy to the sysvol

  gpo manage files remove

Remove VGP Files Group Policy from the sysvol

  gpo manage openssh list

List VGP OpenSSH Group Policy from the sysvol

  gpo manage openssh set

Sets a VGP OpenSSH Group Policy to the sysvol

  gpo manage sudoers add

Adds a Samba Sudoers Group Policy to the sysvol.

  gpo manage sudoers list

List Samba Sudoers Group Policy from the sysvol.

  gpo manage sudoers remove

Removes a Samba Sudoers Group Policy from the sysvol.

  gpo manage scripts startup list

List VGP Startup Script Group Policy from the sysvol

  gpo manage scripts startup add

Adds VGP Startup Script Group Policy to the sysvol

  gpo manage scripts startup remove

Removes VGP Startup Script Group Policy from the sysvol

  gpo manage motd list

List VGP MOTD Group Policy from the sysvol.

  gpo manage motd set

Sets a VGP MOTD Group Policy to the sysvol

  gpo manage issue list

List VGP Issue Group Policy from the sysvol.

  gpo manage issue set

Sets a VGP Issue Group Policy to the sysvol

  gpo manage access add

Adds a VGP Host Access Group Policy to the sysvol

  gpo manage access list

List VGP Host Access Group Policy from the sysvol

  gpo manage access remove

Remove a VGP Host Access Group Policy from the sysvol

  group

Manage groups.

  group add groupname [options]

Create a new AD group.

  group create groupname [options]

Add a new AD group. This is a synonym for the samba-tool group add command and is available for compatibility reasons only. Please use samba-tool group add instead.

  group addmembers groupname members [options]

Add members to an AD group.

  group addunixattrs groupname gidnumber [options]

Add RFC2307 Unix attributes to a group account in the Active Directory domain. The groupname specified on the command is the sAMaccountName.

Unix (RFC2307) attributes will be added to the group account.

Add 'idmap_ldb:use rfc2307 = Yes' to smb.conf to use these attributes for UID/GID mapping.

The command may be run from the root userid or another authorized userid. The -H or --URL= option can be used to execute the command against a remote server.

Example1:

    samba-tool group addunixattrs Group1 10000

Example1 shows how to add RFC2307 attributes to a domain enabled group account.

The groups Unix ID will be set to '10000', provided this ID isn't already in use.

-H URL, --URL=URL
    LDB URL for database or target server

  group delete groupname [options]

Delete an AD group.

  group edit groupname

Edit a group AD object.

--editor=EDITOR
    Specifies the editor to use instead of the system default, or 'vi' if no system default is set.

  group list

List all groups.

  group listmembers groupname [options]

List all members of the specified AD group.

By default the sAMAccountNames are listed. If no sAMAccountName is available, the CN will be used instead.

--full-dn
    List the distinguished names instead of the sAMAccountNames.

--hide-expired
    Do not list expired group members.

--hide-disabled
    Do not list disabled group members.

  group move groupname new_parent_dn [options]

This command moves a group into the specified organizational unit or container.

The groupname specified on the command is the sAMAccountName.

The name of the organizational unit or container can be specified as a full DN or without the domainDN component.

  group removemembers groupname members [options]

Remove members from the specified AD group.

  group show groupname [options]

Show group object and it's attributes.

  group stats [options]

Show statistics for overall groups and group memberships.

  group rename groupname [options]

Rename a group and related attributes.

This command allows to set the group's name related attributes. The group's CN will be renamed automatically. The group's CN will be the sAMAccountName. Use the --force-new-cn option to specify the new CN manually and the --reset-cn to reset this change.

Use an empty attribute value to remove the specified attribute.

The groupname specified on the command is the sAMAccountName.

--force-new-cn=NEW_CN
    Specify a new CN (RDN) instead of using the sAMAccountName.

--reset-cn
    Set the CN to the sAMAccountName.

--mail-address=MAIL_ADDRESS
    New mail address

--samaccountname=SAMACCOUNTNAME
    New account name (sAMAccountName/logon name)

  ldapcmp URL1 URL2 domain|configuration|schema|dnsdomain|dnsforest [options]

Compare two LDAP databases.

  ntacl

Manage NT ACLs.

  ntacl changedomsid original-domain-SID new-domain-SID file [options]

Change the domain SID for ACLs. Can be used to change all entries in acl_xattr when the machine's SID has accidentally changed or the data set has been copied to another machine either via backup/restore or rsync.

--use-ntvfs
    Set the ACLs directly to the TDB or xattr. The POSIX permissions will NOT be changed, only the NT ACL will be stored.

--service=SERVICE
    Specify the name of the smb.conf service to use. This option is required in combination with the --use-s3fs option.

--use-s3fs
    Set the ACLs for use with the default s3fs file server via the VFS layer. This option requires a smb.conf service, specified by the --service=SERVICE option.

--xattr-backend=[native|tdb]
    Specify the xattr backend type (native fs or tdb).

--eadb-file=EADB_FILE
    Name of the tdb file where attributes are stored.

--recursive
    Set the ACLs for directories and their contents recursively.

--follow-symlinks
    Follow symlinks when --recursive is specified.

--verbose
    Verbosely list files and ACLs which are being processed.

  ntacl getdosinfo file [options]

Get DOS info of a file from xattr.

  ntacl get file [options]

Get ACLs on a file.

  ntacl set acl file [options]

Set ACLs on a file.

  ntacl sysvolcheck

Check sysvol ACLs match defaults (including correct ACLs on GPOs).

  ntacl sysvolreset

Reset sysvol ACLs to defaults (including correct ACLs on GPOs).

  ou

Manage organizational units (OUs).

  ou add ou_dn [options]

Add a new organizational unit.

The name of the organizational unit can be specified as a full DN or without the domainDN component.

--description=DESCRIPTION
    Specify OU's description.

  ou create ou_dn [options]

Add a new organizational unit. This is a synonym for the samba-tool ou add command and is available for compatibility reasons only. Please use samba-tool ou add instead.

  ou delete ou_dn [options]

Delete an organizational unit.

The name of the organizational unit can be specified as a full DN or without the domainDN component.

--force-subtree-delete
    Delete organizational unit and all children recursively.

  ou list [options]

List all organizational units.

--full-dn
    Display DNs including the base DN.

  ou listobjects ou_dn [options]

List all objects in an organizational unit.

The name of the organizational unit can be specified as a full DN or without the domainDN component.

--full-dn
    Display DNs including the base DN.

-r|--recursive
    List objects recursively.

  ou move old_ou_dn new_parent_dn [options]

Move an organizational unit.

The name of the organizational units can be specified as a full DN or without the domainDN component.

  ou rename old_ou_dn new_ou_dn [options]

Rename an organizational unit.

The name of the organizational units can be specified as a full DN or without the domainDN component.

  processes

List samba server processes.

If no processes are show, but Samba is running, it is possible that samba-tool has not found the correct smb.conf, and the use of -s/--configfile is required.

--name=NAME
    Show processes associated with the given name.

--pid=PID
    Show names associated with the PID.

  rodc

Manage Read-Only Domain Controller (RODC).

  rodc preload SID|DN|accountname [options]

Preload one account for an RODC.

  schema

Manage and query schema.

  schema attribute modify attribute [options]

Modify the behaviour of an attribute in schema.

  schema attribute show attribute [options]

Display an attribute schema definition.

  schema attribute show_oc attribute [options]

Show objectclasses that MAY or MUST contain this attribute.

  schema objectclass show objectclass [options]

Display an objectclass schema definition.

  service-account

Service account management.

  service-account list

List service accounts on the domain.

-H, --URL
    LDB URL for database or target server.

--json
    View service accounts as JSON instead of a list.

  service-account view

View a single service account on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Account name of service account to view (required).

  service-account create

Create a new service account on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Account name of service account (required).

--dns-host-name
    DNS hostname of this service account (required).

--group-msa-membership
    Optional Group MSA Membership SDDL.

--managed-password-interval
    Managed password refresh interval in days.

  service-account modify

Modify an existing service account on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Account name of service account (required).

--dns-host-name
    Update DNS hostname of this service account.

--group-msa-membership
    Update Group MSA Membership SDDL.

  service-account delete

Delete a service accounts on the domain.

-H, --URL
    LDB URL for database or target server.

--name
    Account name of service account to delete.

  service-account group-msa-membership

Service account Group MSA Membership management.

  service-account group-msa-membership show

Display Group MSA Membership for a service account.

-H, --URL
    LDB URL for database or target server.

--name
    Account name of service account (required).

--json
    Return as JSON instead of a list.

  service-account group-msa-membership add

Add a principal to Group MSA Membership for a service account.

-H, --URL
    LDB URL for database or target server.

--name
    Account name of service account (required).

--principal
    Name, DN or SID of principal to add.

  service-account group-msa-membership remove

Remove a principal from Group MSA Membership for a service account.

-H, --URL
    LDB URL for database or target server.

--name
    Account name of service account (required).

--principal
    Name, DN or SID of principal to remove.

  shell

Opens an interactive Samba Python shell.

  shell [options]

Opens an interactive Python shell for Samba ldb connection.

-H, --URL
    LDB URL for database or target server.

  sites

Manage sites.

  sites list [options]

List sites.

--json
    Output as JSON instead of a list

  sites view site [options]

View site details.

  sites create site [options]

Create a new site.

  sites remove site [options]

Delete an existing site.

  sites subnet list site [options]

List subnets for a site.

--json
    Output as JSON instead of a list

  sites subnet view subnet [options]

View subnet details.

  sites subnet create subnet site-of-subnet [options]

Create a new subnet.

  sites subnet remove subnet [options]

Delete an existing subnet.

  sites subnet set-site subnet site-of-subnet [options]

Assign a subnet to a site.

  spn

Manage Service Principal Names (SPN).

  spn add name user [options]

Create a new SPN.

  spn delete name [user] [options]

Delete an existing SPN.

  spn list user [options]

List SPNs of a given user.

  testparm

Check the syntax of the configuration file.

  time

Retrieve the time on a server.

  user

Manage users.

  user add username [password]

Add a new user to the Active Directory Domain.

  user addunixattrs username uid-number [options]

Add RFC2307 attributes to a user.

This command adds Unix attributes to a user account in the Active Directory domain.

The username specified on the command is the sAMaccountName.

You must supply a unique uid.

Unix (RFC2307) attributes will be added to the user account.

If you supply a group id with '--gid-number', this will be used for the users Unix 'gidNumber' attribute.

If '--gid-number' is not supplied, the users Unix gidNumber will be set to the one found in 'Domain Users', this means Domain Users must have a gidNumber attribute.

If '--unix-home' is not supplied, the users Unix home directory will be set to /home/DOMAIN/username.

If '--login-shell' is not supplied, the users Unix login shell will be set to '/bin/sh'

If ---gecos' is not supplied, the users Unix gecos field will be set to the user's 'CN' attribute.

Add 'idmap_ldb:use rfc2307 = Yes' to the smb.conf on DCs to use these attributes for UID/GID mapping.

The command may be run from the root userid or another authorised userid. The -H or --URL= option can be used to execute the command against a remote server.

Example1:

    samba-tool user addunixattrs User1 10001

Example1 shows how to add RFC2307 attributes to a domain enabled user account, Domain Users will be set as the users gidNumber.

The users Unix ID will be set to '10001', provided this ID isn't already in use.

Example2:

    samba-tool user addunixattrs User2 10002 --gid-number=10001 --unix-home=/home/User2

Example2 shows how to add RFC2307 attributes to a domain enabled user account.

The users Unix ID will be set to '10002', provided this ID isn't already in use.

The users gidNumber attribute will be set to '10001'

The users Unix home directory will be set to '/home/user2'

Example3:

    samba-tool user addunixattrs User3 10003 --gid-number=10001 --login-shell=/bin/false --gecos='User3 test'

Example3 shows how to add RFC2307 attributes to a domain enabled user account.

The users Unix ID will be set to '10003', provided this ID isn't already in use. The users gidNumber attribute will be set to '10001'. The users Unix login shell will be set to '/bin/false'. The users gecos field will be set to 'User3 test'.

-H URL, --URL=URL
    LDB URL for database or target server

--gid-number=GROUP_ID
    User's Unix/RFC2307 GID

--unix-home=DIR
    User's Unix/RFC2307 home directory

--login-shell=SHELL
    User's Unix/RFC2307 login shell

--gecos=GECOS
    User's Unix/RFC2307 GECOS field

--uid=USER_ID
    User's Unix/RFC2307 user id

  user create username [password]

Add a new user. This is a synonym for the samba-tool user add command and is available for compatibility reasons only. Please use samba-tool user add instead.

  user delete username [options]

Delete an existing user account.

  user disable username

Disable a user account.

--remove-supplemental-groups
    Remove user from all groups, but keep the primary group.

  user edit username

Edit a user account AD object.

--editor=EDITOR
    Specifies the editor to use instead of the system default, or 'vi' if no system default is set.

  user enable username

Enable a user account.

  user list

List all users.

By default the user's sAMAccountNames are listed.

--full-dn
    List user's distinguished names instead of the sAMAccountNames.

-b BASE_DN|--base-dn=BASE_DN
    Specify base DN to use. Only users under the specified base DN will be listed.

--hide-expired
    Do not list expired user accounts.

--hide-disabled
    Do not list disabled user accounts.

--locked-only
    Only list locked user accounts.

  user setprimarygroup username primarygroupname

Set the primary group a user account.

  user getgroups username

Get the direct group memberships of a user account.

  user show username [options]

Display a user AD object.

--attributes=USER_ATTRS
    Comma separated list of attributes, which will be printed.

  user move username new_parent_dn [options]

This command moves a user account into the specified organizational unit or container.

The username specified on the command is the sAMAccountName.

The name of the organizational unit or container can be specified as a full DN or without the domainDN component.

  user password [options]

Change password for a user account (the one provided in authentication).

  user rename username [options]

Rename a user and related attributes.

This command allows to set the user's name related attributes. The user's CN will be renamed automatically. The user's new CN will be made up by combining the given-name, initials and surname. A dot ('.') will be appended to the initials automatically, if required. Use the --force-new-cn option to specify the new CN manually and --reset-cn to reset this change.

Use an empty attribute value to remove the specified attribute.

The username specified on the command is the sAMAccountName.

--surname=SURNAME
    New surname

--given-name=GIVEN_NAME
    New given name

--initials=INITIALS
    New initials

--force-new-cn=NEW_CN
    Specify a new CN (RDN) instead of using a combination of the given name, initials and surname.

--reset-cn
    Set the CN to the default combination of given name, initials and surname.

--display-name=DISPLAY_NAME
    New display name

--mail-address=MAIL_ADDRESS
    New email address

--samaccountname=SAMACCOUNTNAME
    New account name (sAMAccountName/logon name)

--upn=UPN
    New user principal name

  user sensitive accountname [show|on|off] [options]

Set/unset or show UF_NOT_DELEGATED for an account.

-H URL, --URL=URL
    LDB URL for database or target server

  user setexpiry username [options]

Set the expiration of a user account.

  user setpassword username [options]

Sets or resets the password of a user account.

  user unlock username [options]

This command unlocks a user account in the Active Directory domain.

  user getpassword username [options]

Gets the password of a user account.

  user get-kerberos-ticket username [options]

Gets a Kerberos Ticket Granting Ticket as the account.

  user syncpasswords --cache-ldb-initialize [options]

Syncs the passwords of all user accounts, using an optional script.

Note that this command should run on a single domain controller only (typically the PDC-emulator).

  user auth policy assign username [options]

Set assigned authentication policy for user.

--policy
    Name of authentication policy to assign or leave empty to remove.

  user auth policy remove username

Remove assigned authentication policy from user.

  user auth policy view username

View the assigned authentication policy for user.

  user auth silo assign username [options]

Set assigned authentication silo for user.

--silo
    Name of authentication silo to assign or leave empty to remove.

  user auth silo remove username

Remove assigned authentication silo from user.

  user auth silo view username

View the assigned authentication silo for user.

  vampire [options] domain

Join and synchronise a remote AD domain to the local server. Please note that samba-tool vampire is deprecated, please use samba-tool domain join instead.

  visualize [options] subcommand

Produce graphical representations of Samba network state. To work out what is happening in a replication graph, it is sometimes helpful to use visualisations.

There are two subcommands, two graphical modes, and (roughly) two modes of operation with respect to the location of authority.

  MODES OF OPERATION

samba-tool visualize ntdsconn
    Looks at NTDS connections.

samba-tool visualize reps
    Looks at repsTo and repsFrom objects.

samba-tool visualize uptodateness
    Looks at replication lag as shown by the uptodateness vectors.

  GRAPHICAL MODES

--distance
    Distances between DCs are shown in a matrix in the terminal.

--dot
    Generate Graphviz dot output (for ntdsconn and reps modes). When viewed using dot or xdot, this shows the network as a graph with DCs as vertices and connections edges. Certain types of degenerate edges are shown in different colours or line-styles.

--xdot
    Generate Graphviz dot output as with [--dot] and attempt to view it immediately using /usr/bin/xdot.

-r
    Normally, samba-tool talks to one database; with the [-r] option attempts are made to contact all the DCs known to the first database. This is necessary for samba-tool visualize uptodateness and for samba-tool visualize reps because the repsFrom/To objects are not replicated, and it can reveal replication issues in other modes.

  help

Gives usage information.

VERSION

This man page is complete for version 4.23.3 of the Samba suite.

AUTHOR

The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.