---
title: "qwraps2: Graphics"
author: "Peter E. DeWitt"
output:
 rmarkdown::html_vignette:
   toc: true
   number_sections: true
vignette: >
 %\VignetteIndexEntry{qwraps2: Graphics}
 %\VignetteEngine{knitr::rmarkdown}
 %\VignetteEncoding{UTF-8}
---


```{r label = "setup", include = FALSE}
knitr::opts_chunk$set(collapse = TRUE)
library(qwraps2)
packageVersion("qwraps2")
```


There are several graphics generated within qwraps2.  The naming convention
for the "quick" plots was inspired by the (deprecated)
`r  CRANpkg(ggplot2)  `
function
`r  backtick(qplot) %s% "."  `
The development, flexibility, and robustness of these functions vary.  Some
"tips and tricks" are provided.


# qacf: Autocorrelation Plots

Generate an example data set.

```{r}
set.seed(42)
n <- 250
x1 <- x2 <- x3 <- x4 <- vector('numeric', length = n)
x1[1] <- runif(1)
x2[1] <- runif(1)
x3[1] <- runif(1)
x4[1] <- runif(1)

# white noise
Z.1 <- rnorm(n, 0, 1)
Z.2 <- rnorm(n, 0, 2)
Z.3 <- rnorm(n, 0, 5)

for(i in 2:n)
{
  x1[i] <- x1[i-1] + Z.1[i] - Z.1[i-1] + x4[i-1] - x2[i-1]
  x2[i] <- x2[i-1] - 2 * Z.2[i] + Z.2[i-1] - x4[i-1]
  x3[i] <- x3[i-1] + x2[i-1] + 0.2 * Z.3[i] + Z.3[i-1]
  x4[i] <- x4[i-1] + runif(1, 0.5, 1.5) * x4[i-1]
}
testdf <- data.frame(x1, x2, x3, x4)

# Base acf plot for one variable
acf(testdf$x1)

# qacf plot for one variable
qacf(testdf$x1)
qacf(testdf$x1, show_sig = TRUE)

```
```{r fig.width = 5, fig.height = 5}
# more than one variable
acf(testdf)
qacf(testdf)
qacf(testdf, show_sig = TRUE)
```


## Tips and tricks

The implementation of qacf is based on the use of
`r  backtick(stats::acf)  `
to produce the statistics needed for the plot.  If you want to get at the
data itself to build your own acf plot you can extract the data frame from
the qacf return:

```{r}
acf_plot_data <- qacf(testdf)$data
head(acf_plot_data)
```



# qblandaltman: Bland Altman Plot

Introduced in [@altman1983measurement] and [@bland1986statistical], the
qblandaltman method builds ggplot2 style Bland Altman plots.  For examples we
use the provided pefr data set which was transcribed from
[@bland1986statistical].  See
`r  backtick(vignette("qwraps2-data-sets", package = "qwraps2"))  `
For more details on that data set.

The following replicates the figures in [@bland1986statistical].

Using the first measurement only:

```{r}
pefr_m1 <-
  cbind("Large" = pefr[pefr$measurement == 1 & pefr$meter == "Wright peak flow meter", "pefr"],
        "Mini"  = pefr[pefr$measurement == 1 & pefr$meter == "Mini Wright peak flow meter", "pefr"])
```


A standard x-y style plot and a correlation coefficient suggests that the two
meters provide reasonably similar results.

```{r}
cor(pefr_m1)

ggplot2::ggplot(data = as.data.frame(pefr_m1)) +
  ggplot2::aes(x = Large, y = Mini) +
  ggplot2::geom_point() +
  ggplot2::xlab("Large Meter") +
  ggplot2::ylab("Mini Meter") +
  ggplot2::xlim(0, 800) +
  ggplot2::ylim(0, 800) +
  ggplot2::geom_abline(slope = 1)
```


However, for many reasons, the above is misleading.  One simple note:
correlation is not a metric for agreement, i.e., perfect agreement would be
shown if all the data points fell on the line of equality whereas perfect
correlation occurs when the data points are simply co-linear.

The Bland Altman plot plots the average value on the x-axis and the
difference in the measurements on the y-axis:

```{r}
# default plot
qblandaltman(pefr_m1)

# modified plot
ggplot2::last_plot() +
  ggplot2::xlim(0, 800) +
  ggplot2::ylim(-100, 100) +
  ggplot2::xlab("Average of two meters") +
  ggplot2::ylab("Difference in the measurements")
```


There is no distinct relationship between the differences and the average,
but the difference in the measurements between the two meters was observed to
range between
`r  paste(range(apply(pefr_m1, 1, diff)), collapse = " and ")  `
liters per minute.  Such a discrepancy between the meters is not observable
from the simple x-y plot.

Reliability, or repeatability, of measurements can also be investigated with
a Bland Altman plot.

```{r}
pefr_mini <-
  cbind(m1 = pefr[pefr$measurement == 1 & pefr$meter == "Mini Wright peak flow meter", "pefr"],
        m2 = pefr[pefr$measurement == 2 & pefr$meter == "Mini Wright peak flow meter", "pefr"])

qblandaltman(pefr_mini)
```




# qkmplot: Kaplan Meier Plots


```{r}
# create a survfit object
require(survival)
leukemia.surv <- survival::survfit(survival::Surv(time, status) ~ x, data = survival::aml)

# base R km plot
survival:::plot.survfit(leukemia.surv, conf.int = TRUE, lty = 2:3, col = 1:2)

```
```{r fig.width = 5}
# qkmplot
qkmplot(leukemia.surv, conf_int = TRUE)
```


The function
`r  backtick(qkmplot_bulid_data_frame)  `
can be used to generate a data.frame needed for building a KM plot.  This
could be helpful for creating bespoke plots.

```{r}
leukemia_km_data <- qkmplot_bulid_data_frame(leukemia.surv)
head(leukemia_km_data, 3)

```
```{r fig.width = 5}
qkmplot(leukemia_km_data)
```


Intercept only models are easy to plot too.

```{r fig.width = 5}
intonly_fit <- survival::survfit(survival::Surv(time, status) ~ 1, data = survival::aml)
survival:::plot.survfit(intonly_fit, conf.int = TRUE)
qkmplot(intonly_fit, conf_int = TRUE)
```



# qroc and qprc: Receiver Operating Curve and Precision Recall Curve

Starting in
`r  Rpkg(qwraps2)  `
version 0.6.0, the methods for building these graphics have been
fundamentally changed as part of a major refactor of the
`r  backtick(confusion_matrix)  `
method which replaces a lot of the code that
`r  backtick(qroc)  `
and
`r  backtick(qprc)  `
were built on.

For this work we will consider a couple models for categorizing email and
spam or not based on the Spambase [@spambase] data.  More details on this
data set can be found in the
`r  backtick(vignette('qwraps2-data-sets', package = "qwraps2"))  `

Start by defining a training and validation splits of the spambase data

```{r}
set.seed(42)
tidx <- runif(nrow(spambase)) <= 0.80
xidx <- which(names(spambase) != "spam")
yidx <- which(names(spambase) == "spam")
training_set   <- spambase[tidx, ]
validating_set <- spambase[!tidx, ]
```





Train a few models:

```{r}
logistic_model <-
  glm(
    spam ~ .
  , data = training_set
  , family = binomial()
  )

ridge_model <-
  glmnet::cv.glmnet(
    y = training_set[, yidx]
  , x = as.matrix(training_set[, xidx])
  , family = binomial()
  , alpha = 0
  )

lasso_model <-
  glmnet::cv.glmnet(
    y = training_set[, yidx]
  , x = as.matrix(training_set[, xidx])
  , family = binomial()
  , alpha = 1
  )
```


Generate the predicted values on the validation set:

```{r}
validating_set$logistic_model_prediction <-
  predict(
    logistic_model
  , newdata = validating_set
  , type = "response"
  )

validating_set$ridge_model_prediction <-
  as.numeric(
    predict(
      ridge_model
    , newx = as.matrix(validating_set[, xidx])
    , type = "response"
    , s = "lambda.1se"
    )
  )

validating_set$lasso_model_prediction <-
  as.numeric(
    predict(
      lasso_model
    , newx = as.matrix(validating_set[, xidx])
    , type = "response"
    , s = "lambda.1se"
    )
  )
```


To build ROC and/or PRC plots start by building the confusion matrix for each
model.  The qwraps2 function
`r  backtick(confusion_matrix)  `
makes this easy.

```{r}
cm1 <- confusion_matrix(spam ~ logistic_model_prediction, data = validating_set)
cm2 <- confusion_matrix(spam ~ ridge_model_prediction, data = validating_set)
cm3 <- confusion_matrix(spam ~ lasso_model_prediction, data = validating_set)
```


The ROC and PRC plots are ggplot objects and can be modified as you would any
other ggplot object.

```{r}
qroc(cm1) + ggplot2::ggtitle("Logisitic Model")
qroc(cm2) + ggplot2::ggtitle("Ridge Regression Model")
qroc(cm3) + ggplot2::ggtitle("LASSO Regression Model")
```


Graphing all three curves in one image with AUROC in the legend:

```{r}
roc_plot_data <-
  rbind(
      cbind(Model = paste("Logisitic; AUROC =", frmt(cm1$auroc, 3)), cm1$cm_stats)
    , cbind(Model = paste("Ridge; AUROC =",     frmt(cm2$auroc, 3)), cm2$cm_stats)
    , cbind(Model = paste("LASSO; AUROC =",     frmt(cm3$auroc, 3)), cm3$cm_stats)
    )

qroc(roc_plot_data) +
  ggplot2::aes(color = Model) +
  ggplot2::theme(legend.position = "bottom")
```


Similar for PRC:

```{r}
qprc(cm1) + ggplot2::ggtitle("Logisitic Model")
qprc(cm2) + ggplot2::ggtitle("Ridge Regression Model")
qprc(cm3) + ggplot2::ggtitle("LASSO Regression Model")

prc_plot_data <-
  rbind(
      cbind(Model = paste("Logisitic; AUPRC =", frmt(cm1$auprc, 3)), cm1$cm_stats)
    , cbind(Model = paste("Ridge; AUPRC =",     frmt(cm2$auprc, 3)), cm2$cm_stats)
    , cbind(Model = paste("LASSO; AUPRC =",     frmt(cm3$auprc, 3)), cm3$cm_stats)
    )

qprc(prc_plot_data) +
  ggplot2::aes(color = Model) +
  ggplot2::geom_hline(yintercept = cm1$prevalence) +
  ggplot2::theme(legend.position = "bottom")
```



# References

<div id="refs"></div>

# Session Info

```{r label = "sessioninfo"}
sessionInfo()
```

