                                  _   _ ____  _
                              ___| | | |  _ \| |
                             / __| | | | |_) | |
                            | (__| |_| |  _ <| |___
                             \___|\___/|_| \_\_____|

                                  Changelog

Version 7.21.7 (23 Jun 2011)

Daniel Stenberg (23 Jun 2011)
- curl_formfree: clarify which pointer to free

- RELEASE-NOTES: mention security issue 20110623
  
  libcurl inappropriate GSSAPI delegation. Full details at
  http://curl.haxx.se/docs/adv_20110623.html

- RELEASE-NOTES: synced with 9016958aa8989

- Curl_input_negotiate: do not delegate GSSAPI credentials
  
  This is a security flaw. See curl advisory 20110623 for details.
  
  Reported by: Richard Silverman

- [Josue Andrade Gomes brought this change]

  windows build: use correct MS CRT

- Merge pull request #23 from salty-horse/pop3_list_space
  
  [pop3] remove extra space in LIST command

Ori Avtalion (21 Jun 2011)
- [pop3] remove extra space in LIST command
  
  Some servers, e.g. mail.bezeqint.net:110, consider it a syntax error

Yang Tse (21 Jun 2011)
- http: fix compiler warning
  
  compiler warning: conditional expression is constant

- asyn-thread: fix compiler warning
  
  compiler warning: variable is initialized but not referenced

- cmake: remove spurious definition

Daniel Stenberg (21 Jun 2011)
- FAQ: more blurb on persistent connections

Yang Tse (21 Jun 2011)
- xc-translit.m4 fix quoting

Daniel Stenberg (20 Jun 2011)
- INSTALL: mention the GIT-INFO file

Dan Fandrich (20 Jun 2011)
- Added LOCAL_MODULE_TAGS to support Android gingerbread

Daniel Stenberg (19 Jun 2011)
- [Amr Shahin brought this change]

  unitteset: Curl_llist_move
  
  adding unit test for Curl_llist_move, documenting unit-tested functions
  in llist.c, changing unit-test to unittest, replacing assert calls with
  abort_unless calls

- CURLFORM_STREAM: acknowledge CURLFORM_FILENAME
  
  The CURLFORM_STREAM is documented to only insert a file name (and thus
  look like a file upload) in the part if CURLFORM_FILENAME is set, but in
  reality it always inserted a filename="" and if CURLFORM_FILENAME wasn't
  set, it would insert insert rubbish (or possibly crash).
  
  This is now fixed to work as documented, and test 554 has been extended
  to verify this.
  
  Reported by: Sascha Swiercy
  Bug: http://curl.haxx.se/mail/lib-2011-06/0070.html

Yang Tse (17 Jun 2011)
- configure: avoid direct usage of AS_TR_* macros

- xc-translit.m4 provides transliteration macros with well defined behavior.

Daniel Stenberg (14 Jun 2011)
- RELEASE-NOTES: add more contributors for this release

- RELEASE-NOTES: synced with 0aedccc18a33a778535

- curl_formget: fix FILE * leak
  
  Properly deal with the fact that the last fread() call most probably is
  a short read, and when using callbacks in fact all calls can be short
  reads. No longer consider a file read done until it returns a 0 from the
  read function.
  
  Reported by: Aaron Orenstein
  Bug: http://curl.haxx.se/mail/lib-2011-06/0048.html

- curl_formget: treat CURLFORM_STREAM better
  
  If a piece is set to use a callback to get the data, it should not be
  treated as data. It unfortunately also requires that curl_easy_perform()
  or similar has been used as otherwise the callback function hasn't been
  figured out and curl_formget won't know how to get the content.

- curl_formget.3: CURLFORM_STREAM has its drawbacks
  
  Due to a design flaw, the CURLFORM_STREAM option doesn't really work
  with curl_formget until after curl_easy_perform (or similar).

- FAQ: binding clarification
  
  We don't author the bindings, they are created outside the main project.

Dan Fandrich (11 Jun 2011)
- Added http as a dependency of test 1308

Daniel Stenberg (12 Jun 2011)
- test1309: added to the dist

- write: add return code checks when used
  
  These were just warnings in test code but it still makes it nicer to not
  generate them.

- long/int mess
  
  Typecast when converting to int from long to avoid some compiler warnings

Yang Tse (11 Jun 2011)
- configure: OpenSSL API detection cleanup

Dan Fandrich (11 Jun 2011)
- Fixed test 1309 to pass the torture test
  
  Removing dynamic allocations also simplifies the test.

Daniel Stenberg (10 Jun 2011)
- splay: add unit tests
  
  The test code that was #ifdef'ed in the code was converted into unit
  tests in test case 1309. I also removed the #if 0'ed code from splay.c

- unittest: mark all unit tested functions
  
  With "@unittest: [num]" in the header comment for each tested function.
  Shows we have a log way to go still...

- CURLOPT_WRITEHEADER: clarify the docs

- unit test formpost: added test case 1308
  
  This is a few first rather basic tests of curl_formadd() and
  curl_formget(). Should serve as building blocks to add more variations
  to the test.

Yang Tse (9 Jun 2011)
- configure: warn if OpenSSL headers and library versions don't match

- configure: get API info for a couple of OpenSSL functions (followup 2)

- configure: get API info for a couple of OpenSSL functions (followup 1)

- configure: fix recvfrom 5th arg type qualifier detection (followup)

- configure: fix recvfrom 5th arg type qualifier detection

Kamil Dudka (8 Jun 2011)
- disconnect: wipe out the keeps_speed time stamp
  
  When closing a connection, the speedchecker's timestamp is now deleted
  so that it cannot accidentally be used by a fresh connection on the same
  handle when examining the transfer speed.
  
  Bug: https://bugzilla.redhat.com/679709

Yang Tse (7 Jun 2011)
- urldata: use uniform inclusion style for OpenSSL headers

Daniel Stenberg (7 Jun 2011)
- HTTP time condition: force closure for 200 OK
  
  When a time condition isn't met, so that no body is delivered to the
  application even though a 2xx response is being read from the server, we
  must close the connection to avoid a re-use of the connection to be
  completely tricked.
  
  Added test 1128 to verify.

- RELEASE-NOTES: synced with b772f3a32146d7d

Yang Tse (6 Jun 2011)
- configure: get API info for a couple of OpenSSL functions

Daniel Stenberg (5 Jun 2011)
- wait_ms: takes an int argument
  
  Typecasts added since I changed more code to use long for timeouts

- Curl_socket_ready: make timeout a 'long'
  
  It was mostly typecasted to int all over the code so switching to long
  instead all over should be a net gain.

Yang Tse (4 Jun 2011)
- xlc: avoid preprocessor definition usage when linking

- unit tests: disable unit tests for a given cross-compilation configuration.
  
  cross-compilation of unit tests static library/programs fails when
  libcurl shared library is also built. This might be due to a libtool or
  automake issue. In this case we disable unit tests.

Daniel Stenberg (3 Jun 2011)
- cookie_output: made private

- digest_cleanup_one: made private

- privatise: make private functions static

- Curl_fileinfo_dup: removed, not used

- parsedate: turn private and static
  
  I removed the prefix as well accordingly.

Dan Fandrich (2 Jun 2011)
- curl hasn't sent a Pragma: header by default for a while

Yang Tse (2 Jun 2011)
- unit tests: attempt to fix linkage issue

- urlglob: fix zero size malloc

- Remove unnecessary typecast

- compiler warning: fix
  
  Fix compiler warning: cast increases required alignment

- unit tests: make unit tests building actually depend on --enable-debug option.

- OpenSSL enabled: require OPENSSL_VERSION_NUMBER definition before usage.

- unit tests: more build adjustments

Daniel Stenberg (1 Jun 2011)
- CURLOPT_WILDCARDMATCH: minor style edit
  
  Due to some flaw in roffit I removed some style changes to make the web
  page look better.

Yang Tse (1 Jun 2011)
- makefile: avoid preprocessor definition usage when linking

- warnless: icc 9.1 workaround

Daniel Stenberg (31 May 2011)
- testcurl.pl: allow configure args to use '='

Yang Tse (30 May 2011)
- Makefile.am: fix spurious CFLAGS duplication

Dan Fandrich (30 May 2011)
- Removed types.h from Android makefile

Daniel Stenberg (30 May 2011)
- configure.ac: skip /dev/urandom check when cross-compiling
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3307835

Yang Tse (29 May 2011)
- main: fix header inclusion order
  
  Currently, Windows cross-compiled autobuilds require inclusion of setup.h
  before curl.h to get definitions of CURL_STATICLIB and BUILDING_LIBCURL.

- main: fix header inclusion order

- distribution: Fix EXTRA_DIST letter case

Daniel Stenberg (27 May 2011)
- curl_easy_setopt.3: NOPROGRESS also affects the callback

Yang Tse (27 May 2011)
- warnless: header inclusion fix

- Make checksrc.pl work on more out-of-tree builds
  
  Source files given with relative paths do not have the
  -D directory specifier prepended.

- compiler warning: fix
  
  Fix compiler warning: conversion may lose significant bits

- socks: fix unaligned memory access

- compiler warning: fix
  
  Fix compiler warning: variable was set but never used
  
  Fix compiler warning: clobber ignored

- unit tests: build adjustment
  
  Also define UNITTESTS macro when building unit test sources.
  
  Fixing compiler warning: external definition with no prior declaration

Daniel Stenberg (25 May 2011)
- create_conn: only switch protocol handler if necessary
  
  When switching to HTTP because a HTTP proxy is being used, the existing
  handler is now checked if it already is "compatible". This allows the https
  handler remain while other non-http handlers will be redirected.
  
  Bug: http://curl.haxx.se/mail/lib-2011-05/0214.html
  Reported by: Jerome Robert

- setopt.3: remove leftover style change

- setopt.3: CURLOPT_WRITEFUNCTION had wrong function proto

Yang Tse (25 May 2011)
- compiler warning: fix followup
  
  Fix compiler warning: variable was set but never used
  
  Fix compiler warning: clobber ignored

- unit tests: README, adjust header inclusion order

- compiler warning: fix
  
  Fix compiler warning: variable was set but never used
  
  Fix compiler warning: clobber ignored

- compiler warning: fix
  
  Fix compiler warning: external definition with no prior declaration

- compiler warning: fix
  
  Fix compiler warning: external definition with no prior declaration

- compiler warning: fix
  
  Fix compiler warning: argument is incompatible with corresponding format
  string conversion

- build: inclusion guard
  
  Enclose header file in an inclusion guard

- compiler warning: fix
  
  Fix compiler warning: expression has no effect

- compiler warning: fix
  
  Fix compiler warning: `keycheck' might be used uninitialized in this function.
  Fix compiler warning: `keybit' might be used uninitialized in this function.

- compiler warning: fix
  
  Fix variable declaration placement

- compiler warning: fix
  
  Fix missing semicolon

- compiler warning: fix
  
  Fix compiler warning: expression has no effect
  
  Fix OOM handling

- compiler warning: fix
  
  Fix compiler warning: expression has no effect

- compiler warning: fix
  
  Fix compiler warning: unused variable 'data'

- compiler warning: fix
  
  Fix compiler warning: enumerated type mixed with another type

- compiler warning: fix
  
  Fix compiler warning: enumerated type mixed with another type

- compiler warning: fix
  
  Fix compiler warning: enumerated type mixed with another type

- compiler warning: fix
  
  Fix compiler warning: enumerated type mixed with another type

- compiler warning: fix
  
  Fix compiler warning: enumerated type mixed with another type

- compiler warning: fix
  
  Fix compiler warning: empty body in an if-statement

- unit tests: adjust header inclusion order
  
  Additionally, prevent multiple inclusions of curl_config.h

Daniel Stenberg (20 May 2011)
- Merge pull request #19 from pierrejoye/master
  
  winbuild: typo in docs

- [Ola Mork brought this change]

  cyassl: build without filesystem
  
  Get cyassl's NO_FILESYSTEM to work with libcurl. Otherwise I'd get linker
  errors for the missing "SSL_CTX_load_verify_locations" functions.

Pierre Joye (20 May 2011)
- - typo

Daniel Stenberg (19 May 2011)
- typo: close is in man page section 3

Yang Tse (19 May 2011)
- tests: verify OPEN/CLOSESOCKETFUNCTION
  
  Test 585: Fix opensocket return type, and avoid function name clash.

- version: linkage fix
  
  Fix linkage on c-ares enabled Windows static builds

Daniel Stenberg (18 May 2011)
- curl_easy_setopt.3: document CLOSESOCKET* options

- tests: verify OPEN/CLOSESOCKETFUNCTION
  
  Test 585 and 586 were added. Using a modified lib500.c

- symbols-in-versions: add CLOSESOCKET*

- CLOSESOCKETFUNCTION: use the callback
  
  Fix the return type of the callback to match close() and make use of it.

- CLOSESOCKETFUNCTION: added
  
  Introduced the initial setup to allow closesocket callbacks by making
  sure sclose() is only ever called from one place in the libcurl source
  and still run all test cases fine.

- GnuTLS handshake: fix timeout
  
  Commit cbf4961bf3e garbled the timeout handling while doing SSL
  handshaking (in an attempt at fixing another bug). This puts sanity
  back.
  
  Bug: http://curl.haxx.se/mail/lib-2011-05/0167.html
  Reported by: Ethan Glasser Camp

- checksrc: trailing whitespace detection fix

- [Marcel Roelofs brought this change]

  negotiate sspi: fix sequential requests

- tests: added HTTP If-Modified-Since tests
  
  Added test 1126 and 1127 to verify curl's behaviour when If-Modified-Since
  is used and a 200 is returned.
  
  The list of test cases in Makefile.am is now sorted numerically.

- include: cleanup
  
  Made the public headers checksrc compliant
  
  Removed types.h (it's been unused since April 2004)
  
  Made the root makefile do make in include by default as well, so that
  TAGS and the checksrc will work better.

Dan Fandrich (6 May 2011)
- Fixed compilation when RTSP is disabled

- Fixed LDAP after RTSP readwrite change

Daniel Stenberg (6 May 2011)
- RELEASE-NOTES: synced with 32001ac4149b206

- set_userpass: convert from protocol-specific to generic
  
  The protocol handler's flags field now can set that the protocol
  requires a password, so that the set_userpass function doesn't have to
  have the specific knowledge of which protocols that do.

- RTSP: cleanups
  
  Made several functions static
  
  Made one function defined to nothing when RTSP is disabled to avoid
  the #ifdefs in code.
  
  Removed explicit rtsp.h includes

- RTSP: convert protocol-specific checks to generic
  
  Add a 'readwrite' function to the protocol handler struct and use that
  for the extra readwrite functionality RTSP needs.

- SSL: check for SSL, not specific protocols
  
  Code cleanup to check less for protocols and more for the specific
  relevant feature. Like if SSL is required.

- http_perhapsrewind: remove HTTP check
  
  No need to check for HTTP as this is now a HTTP-specific function

- http_perhapsrewind:
  
  make it static, remove Curl_ prefix

- remove FILE protocol-specific checks
  
  Also, convert the BANPROXY flag into NONETWORK for the protocols
  (file:// only atm) that don't work over networks.

- curl.1: --socks* options no longer needed
  
  As we now can specify all the socks proxy types with the regular --proxy
  option using protocol prefix.

- socks proxy: allow socks5h:// prefix too
  
  Using 'socks5h' as proxy protocol will make it a
  CURLPROXY_SOCKS5_HOSTNAME proxy which is SOCKS5 and asking the proxy to
  resolve host names. I found no "standard" protocol name for this.

- curl.1: minor edit of --ftp-ssl*

- [Jari Aalto brought this change]

  curl.1: use GNU style and sort options
  
  Follow style of GNU layout (cp, mv ...) where options are separated with
  comma: -o, --option
  
  Order item alphabetically (by length also): -o, -O, --option
  
  Follow style of GNU layout by moving help related options to the end:
  --help, -M, --version

- Corrected comments
  
  closepolicy has been deprecated and unused for years

- ConnectionStore: remove unused return code

- indent correctly

- curl_easy_getinfo.3: clarify some timing info

- curl_easy_setopt.3: clarify the SSH KEYFILE options usage
  
  The internal defaults are important info

- docs: mention the protocol:// support in proxy strings

- --data-ascii: add mention
  
  As it is a separate option it should have a .IP title

- url encode docs: mention '-', '.', '_' and '~'
  
  Clarify that the '-', '.', '_' or '~' letters are also not escaped since
  they shouldn't according to RFC3986 section 2.3.
  
  This is how this function has behaved since sep 2010, commit
  5df13c31735fa0.

- SSH: set non-blocking earlier
  
  Introduce an INIT state for the SSH state machine and set libssh2
  non-blocking in that so that it is set properly before
  libssh2_session_startup() is called.
  
  Bug: http://curl.haxx.se/mail/archive-2011-05/0001.html

- curl_formfree.3: mention argument may be NULL
  
  As the code already checks for it we can just as well make it official!

- ConnectionExists: avoid NULL dereference
  
  When checking for connections that are bound to a particular device we
  must make sure we don't compare with a NULL pointer.

- resolver_error: remove bad semicolon

- RELEASE-NOTES: synced with c4bc1d473f324

- anyauthput.c: stdint.h must not be included unconditionally
  
  As it is already included by curlbuild.h if it exists on the platform it
  was included here superfluously anyway.
  
  Reported by: Dagobert Michelsen
  Bug: http://curl.haxx.se/bug/view.cgi?id=3294509

- gai_strerror: provide private implementation
  
  There are systems (like NetWare) without its own gai_strerror()
  function.

- treaded-resolver: better error messages
  
  Now use gai_strerror() to get proper error messages when getaddrinfo()
  has failed. Detect the function in configure.
  
  Code based on work and suggestions by Jeff Pohlmeyer and Guenter Knauf

- proxy: allow socks:// prefix in proxy string
  
  Inspired by a patch from OB.Conseil. Added test case 708 to verify.

- [Zmey Petroff brought this change]

  CMake: improve library search, implement install.
  
  Improved library search by check_function_exists_concat() macro:
  it does not revert the list of libraries any more.
  
  Improved OpenSSL library search: first find zlib, then search for
  openssl libraries that may depend on zlib.
  
  For Unix: openssl libraries can now be detected in nonstandard
  locations. Supply CMAKE_LIBRARY_PATH to CMake on command line.
  
  Added installation capability (very basic one yet).

- multi-socks: fix connect to proxy
  
  When connecting to a socks or similar proxy we do the proxy handshake at
  once when we know the TCP connect is completed and we only consider the
  "connection" complete after the proxy handshake. This fixes test 564
  which is now no longer considered disabled.
  
  Reported by: Dmitri Shubin
  Bug: http://curl.haxx.se/mail/lib-2011-04/0127.html

- cleanup: remove old unused debug code

Dan Fandrich (27 Apr 2011)
- Make checksrc.pl work on out-of-tree builds
  
  Source files given with absolute paths do not have the
  -D directory specifier prepended.

Daniel Stenberg (27 Apr 2011)
- make: add checksrc.pl to dist

- make: add 'checksrc' as target to check code style
  
  The make target checksrc now works in the root makefile and in both the
  src and lib directories.
  
  It is also run automatically on "all" if configure --enable-debug was
  used.

- checksrc: whitespace and code style cleanup
  
  Make everything adhere to the standards upheld by checksrc.pl and now
  run checksrc from the makefile on debug builds.

- checksrc: add -W to allow a file to be whitelisted
  
  Useful when a known file just doesn't comply and there's no intention to
  make it do so.

- whitespace cleanup: no space first in conditionals
  
  "if(a)" is our style, not "if( a )"

- lib/make: run checksrc.pl once for all files
  
  Since it now supports multiple files this will be faster and will show
  problems for more file than one at a time - more convenient.

- checksrc: scan many files, more checks
  
  It now scans multiple files and outputs an error+warning count summary
  at the end in case at least one was detected.
  
  -D can be used to specify in which dir the files are located
  
  The script now scans for conditions that starts with a space for
  if/while/for lines.

- Makefile: run checksrc if debug enabled
  
  And make the build fail if a warning or error was detected

- checksrc: exit error code if warnings or errors

- SSH: move knownhost logic to separate function

- source cleanup: unify look, style and indent levels
  
  By the use of a the new lib/checksrc.pl script that checks that our
  basic source style rules are followed.

Guenter Knauf (27 Apr 2011)
- Windows native IDN fixes.
  
  For now provide prototypes instead of including the
  non-standard normalisation.h which is only available in the
  "Internationalized Domain Names Mitigation APIs" download.

Dan Fandrich (25 Apr 2011)
- Fixed compiler warning in Windows SSPI case

- Fixed compilation when the synchronous resolver is used

- Added new resolver sources to Symbian and VC6 build files

Daniel Stenberg (25 Apr 2011)
- hostip: comment fixed to state current situation

- async resolvers: further cleanups
  
  asyn-ares.c and asyn-thread.c are two separate backends that implement
  the same (internal) async resolver API for libcurl to use. Backend is
  specified at build time.
  
  The internal resolver API is defined in asyn.h for asynch resolvers.

- asynch resolvers: cleanup
  
  Fixed indents, coding conventions and white space edits.
  
  Modified the c-ares completion callback function to again NOT read the
  conn data when the ares handle is being taken down as then it may have
  been freed already.

- [Vsevolod Novikov brought this change]

  asynch resolvers: unified
  
  Introducing an internal API for handling of different async resolver
  backends.

Guenter Knauf (24 Apr 2011)
- Enabled OpenWatcom native Windows IDN build.
  
  For now we directly import the Idn* symbols with the linker;
  an upcoming release of OWC will have these added to the import
  lib normaliz.lib, and prototypes are added to winnnls.h.

Daniel Stenberg (22 Apr 2011)
- NTLM: work with unicode
  
  Rewritten code from a patch brought by Matteo Rocco.

- bump version: work towards 7.21.7

- THANKS: contributors from 7.21.6

Version 7.21.6 (22 Apr 2011)

Daniel Stenberg (22 Apr 2011)
- RELEASE-NOTES: two more contributors

Dan Fandrich (21 Apr 2011)
- Fixed test 1023 when using daily snapshots

- Include unistd.h to declare close()

Julien Chaffraix (21 Apr 2011)
- [Fabian Keil brought this change]

  In lib/, change 'wanna' to 'want to'.
  
  Found with codespell.

- [Fabian Keil brought this change]

  Fix spelling errors in buildconf
  
  Found with codespell.

- [Fabian Keil brought this change]

  Fix spelling errors in src/
  
  Found with codespell.

- [Fabian Keil brought this change]

  Fix spelling errors in include/

- [Fabian Keil brought this change]

  Fix a couple of spelling errors in lib/
  
  Found with codespell.

- transfer.c: Fixed indentation in readwrite_data.

Dan Fandrich (20 Apr 2011)
- Fixed closing test tag

Daniel Stenberg (20 Apr 2011)
- RELEASE-NOTES: synced with 3242abd87a1262

- SFTP: close file before postquote
  
  Make sure that files are closed before the post quote commands run as if
  they operate on the just transferred file they could otherwise easily
  fail.
  
  Patch by: Rajesh Naganathan (edited)

Dan Fandrich (20 Apr 2011)
- Fixed test 1022 when using daily snapshots

Daniel Stenberg (20 Apr 2011)
- Curl_http_connect: detect HTTPS properly after CONNECT
  
  libcurl failed to check the correct struct for HTTPS after CONNECT was
  issued to the proxy, so it didn't do the TLS handshake and subsequently
  failed the connection. A regression released in 7.21.5 (introduced
  around commit 8831000bc07de).
  
  Bug: http://curl.haxx.se/mail/lib-2011-04/0134.html
  Reported by: Josue Andrade Gomes

- curl_easy_setopt.3: CURLOPT_PROXYTYPE clarification
  
  When set to a HTTP 1.0 proxy, that only affects the CONNECT request and
  not the regular HTTP request.

- [Gisle Vanem brought this change]

  CURL_DOES_CONVERSIONS: fixes
  
  Made it compile and work again after the code move.

- CURL_DOES_CONVERSIONS: cleanup
  
  Massively reduce #ifdefs all over (23 #ifdef lines less so far)
  Moved conversion-specific code to non-ascii.c

Guenter Knauf (19 Apr 2011)
- Improve MinGW static makefile builds.
  
  It is now possible to use any combination of features without
  having to 1st add makefile targets to the main makefile. The
  main makefile now passes the 'mingw32-feat1-feat2' as var CFG,
  and the ./[lib|src]/Makefile.m32 parses the CFG var to determine
  the features to be enabled.

- Enabled MinGW native Windows IDN build.

- Windows native IDN fixes.
  
  changed windows.h include to system header;
  changed obsolete 2nd check for str_w to str_utf8 in order to catch
  malloc() failure and avoid a free(NULL);
  changed calls to GetLastError() to void to kill unsused var compiler
  warnings;
  moved one call to GetLastError() into else case so that its only
  called when WideCharToMultiByte() really fails.

- Windows native IDN fixes.
  
  Provide prototype for curl_win32_idn_to_ascii();
  remove wrong 3rd parameter from curl_win32_idn_to_ascii() call.

Daniel Stenberg (19 Apr 2011)
- curl-config: fix version output
  
  do the s/VERSION/CURLVERSION replacement for the human redable output
  for --checkfor
  
  Reported by: Ryan Schmidt

- RELEASE-NOTES: synced with 5aae3c13e2

Guenter Knauf (19 Apr 2011)
- Updated default (recommended) dependency versions.

- Updated default (recommended) dependency versions.

Daniel Stenberg (18 Apr 2011)
- transfer-encoding: document the options
  
  The new libcurl and command line options are now described.

- transfer-encoding: added new option and cmdline
  
  Added CURLOPT_TRANSFER_ENCODING as the option to set to request Transfer
  Encoding in HTTP requests (if built zlib enabled). I also renamed
  CURLOPT_ENCODING to CURLOPT_ACCEPT_ENCODING (while keeping the old name
  around) to reduce the confusion when we have to encoding options for
  HTTP.
  
  --tr-encoding is now the new command line option for curl to request
  this, and thus I updated the test cases accordingly.

- CURLE_BAD_CONTENT_ENCODING: now used for transfer encoding too

- TE: do the Connection: header
  
  When TE: is inserted in the request, we must add a "Connection: TE" as
  well to be HTTP 1.1 compliant. If a custom Connection: header is passed
  in, we must use that and only append TE to it. Test case 1125 verifies
  TE: + custom Connection:.

- test1124: verify gzip AND chunked transfer-encoding

- TE: rename struct field content_encoding
  
  Since this struct member is used in the code to determine what and how
  to decode automatically and since it is now also used for compressed
  Transfer-Encodings, I renamed it to the more suitable 'auto_decoding'

- HTTP: add support for gzip and deflate Transfer-Encoding
  
  Transfer-Encoding differs from Content-Encoding in a few subtle ways,
  but primarily it concerns the transfer only and not the content so when
  discovered to be compressed we know we have to uncompress it. There will
  only arrive compressed transfers in a response after we have requested
  them with the appropriate TE: header.
  
  Test case 1122 and 1123 verify.

Patrick Monnerat (18 Apr 2011)
- OS400 pragma comment: replace (date) by (user, __DATE__) to include year.

- Augment RPG binding with "OLDIES" definitions.
  Fix OS400 LDAP wrappers: strings were non null-terminated.

Daniel Stenberg (18 Apr 2011)
- curl-config: fix --version
  
  curl-config --version didn't output the correct version string (bug
  introduced in commit 0355e33b5f7b234cf3), and unfortunately the test
  case 1022 that was supposed to check for this was broken.
  
  This change fixes the test to detect this problem and it fixes the
  output.
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3288727

- RELEASE-NOTES: updated contributor amount

- THANKS: 11 new contributors from 7.21.5

- 7.21.6: next planned release number

Version 7.21.5 (17 Apr 2011)

Daniel Stenberg (17 Apr 2011)
- base64.c: removed wrong comment

- INTERNALS: clean up
  
  Clarified the release procedure

- TODO-RELEASE: push the remaining ones to next release
  
  As we're closing in on the release, I give up on the remaining ones but
  I leave them in here for now to try to fix for next release.
  
  I removed the 281 issue about warnings from the statical analyzer scans,
  as they seem to be mostly false positives at this point.

- RELEASE-NOTES: synced with c246f63a71

- Curl_ssl_shutdown: restore send/recv pointers
  
  When going back from SSL, put the send/recv function pointers back to
  the plain versions.
  
  Bug: http://curl.haxx.se/mail/lib-2011-04/0070.html
  Reported by: Mehmet Bozkurt

Guenter Knauf (16 Apr 2011)
- Changed email per Gisle's request.

Daniel Stenberg (14 Apr 2011)
- curl.1: error code update
  
  Error 4 has got a meaning
  
  Error 48 has got a slightly different meaning now

- FAQ: c-ares does ipv6 pretty well now

- [Andrei Benea brought this change]

  Fix a buffer overflow in pubkey_show().

Guenter Knauf (14 Apr 2011)
- Replaced var manipulations with perlish hacks.

Dan Fandrich (12 Apr 2011)
- Updated minimum binary sizes

Daniel Stenberg (12 Apr 2011)
- configure: libssh2 link fix without pkg-config
  
  The script didn't properly add the -lssh2 link option when it enabled
  libssh2 linking where pkg-config isn't found.
  
  Reported by: Saqib Ali
  Bug: http://curl.haxx.se/mail/lib-2011-04/0054.html

- RELEASE-NOTES: synced with f01df197981

- checkconnection: don't call with NULL pointer
  
  When checking if an existing RTSP connection is alive or not, the
  checkconnection function might be called with a SessionHandle pointer
  being NULL and then referenced causing a crash. This happened only using
  the multi interface.
  
  Reported by: Tinus van den Berg
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3280739

- curl.1: spell out the -O target directory
  
  When using -O the file will be saved in the current directory, and this
  is now spelled out clearly.

- OpenSSL: no-sslv2 aware
  
  Allow openSSL without SSL2 to be used. This fix is inspired by the fix
  provided by Cristian Rodr韌uez.
  
  Reported by: Cristian Rodr韌uez

- curl_easy_setopt.3: CURLOPT_RESOLVE typo version
  
  Reported by: Hongli Lai

Kamil Dudka (8 Apr 2011)
- nss: allow to use multiple client certificates for a single host
  
  In case a client certificate is used, invalidate SSL session cache
  at the end of a session.  This forces NSS to ask for a new client
  certificate when connecting second time to the same host.
  
  Bug: https://bugzilla.redhat.com/689031

Daniel Stenberg (7 Apr 2011)
- mk-ca-bundle.pl: show full URL in output
  
  When I decided to search for a potential error with the cacert bundle it
  struck me I wanted to see the full source URL in the output...

Dan Fandrich (7 Apr 2011)
- Added mention of FTP proxies

Daniel Stenberg (7 Apr 2011)
- [Gisle Vanem brought this change]

  src/Makefile.b32: updates
  
  * Rename the object object directory from 'objs' to 'BCC_obj' to be in
   sync with my previous patch for lib/Makefile.b32.
  
  * Turn off these warnings to keep the build totally silent (with CBuilder-6
   that is).
    -w-inl    8026 Functions X are not expanded inline.
    -w-pia   8060 Possibly incorrect assignment
    -w-pin  8061 Initialization is only partially bracketed
   (same added in src/Makefile.b32)
  
  * $(MKDIR) and $(RMDIR) have been replaced with the shell-commands 'md'
   and 'rd'. When having MingW/Msys programs 'mkdir.exe' and 'rmdir.exe' in
  $PATH, this confuses Borland's make and the result (the cleaning etc.) would
   not be as expected.
  
  * Removed the preprocessing step; no need for PP_CMD and the .int files.
   curl.exe builds fine w/o and the makefile gets simpler.
  
  * Added a target for creating a compressed hugehelp.c if WITH_ZLIB is  defined.
  It assumes groff, gzip and perl is available if such an "advanced"  users
  requests it. Okay? BTW. My groff and Perl needs unix-slashes ('/').
   Other perls should handle both forms ('/' and '\').

- [Gisle Vanem brought this change]

  lib/Makefile.b32: updates
  
  * Rename the object object directory from 'objs' to 'BCC_obj'. I feel
   it should be named properly. Ref. Makefile.Watcom where it's called
   'WC_Win32.obj'.
  
  * Turn off these warnings to keep the build totally silent (with CBuilder-6
   that is).
    -w-inl    8026 Functions X are not expanded inline.
    -w-pia   8060 Possibly incorrect assignment
    -w-pin  8061 Initialization is only partially bracketed
  
  I'm sure the warnings could be fixed the "proper" way or with some added
  "#pragma" statements. But that just clutters the sources IMHO.
  
  * $(MKDIR) and $(RMDIR) have been replaced with the shell-commands 'md'
   and 'rd'. When having MingW/Msys programs 'mkdir.exe' and 'rmdir.exe' in
  $PATH, this confuses Borland's make and the result (the cleaning etc.) would
   not be as expected.
  
  * Added a ".path.int = $(OBJDIR)" to tell make where the $(PREPROCESSED)
   files are. Why we need the preprocess step in the fist place is beyond me
  (Yang?). But I'll leave that for now.

- [Gisle Vanem brought this change]

  examples/makefile.dj: update email

- TODO-RELEASE: deleted 4 issues
  
  These problems have gotten no interest/feedback from users:
  
  -275 - Introduce a way to avoid sending USER for FTP connections
  -288 - bug 3219997 curl rtmp request curl: (55) select/poll returned error
  
  This problem is rather an autoconf bug with little user interest and it
  can be worked around with an older autoconf:
  
  -278 - "Configure  $as_echo does not work"
  
  This problem is not fixed:
  
  -286 - bug 3214223 Pipelined HTTP requests with a zero-length body broken

- [Chris Smowton brought this change]

  HTTP pipelining: Fix handling of zero-length responses
  
  Also add test case 584 for the same
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3214223

- libcurl.pc: version number fix
  
  This hasn't show the version number correctly since the $VERSION change
  in the configure, and now it works again.

Dan Fandrich (5 Apr 2011)
- Changed some nonportable types

- Don't list NTLM in curl-config when HTTP is disabled
  
  Also, fixed Curl_proxyCONNECT() stub with HTTP disabled.

- Fixed compatibility macro CURLE_URL_MALFORMAT_USER

Daniel Stenberg (5 Apr 2011)
- return code cleanup: build, init and run-time errors
  
  Stop the abuse of CURLE_FAILED_INIT as return code for things not being
  init related by introducing two new return codes:
  
  CURLE_NOT_BUILT_IN and CURLE_UNKNOWN_OPTION
  
  CURLE_NOT_BUILT_IN replaces return code 4 that has been obsoleted for
  several years. It is used for returning error when something is
  attempted to be used but the feature/option was not enabled or
  explictitly disabled at build-time. Getting this error mostly means that
  libcurl needs to be rebuilt.
  
  CURLE_FAILED_INIT is now saved and used strictly for init
  failures. Getting this problem means something went seriously wrong,
  like a resource shortage or similar.
  
  CURLE_UNKNOWN_OPTION is the option formerly known as
  CURLE_UNKNOWN_TELNET_OPTION (and the old name is still present,
  separately defined to be removed in a very distant future). This error
  code is meant to be used to return when an option is given to libcurl
  that isn't known. This problem would mostly indicate a problem in the
  program that uses libcurl.

- FTP+proxy: macrofied functions when proxy disabled
  
  In my attempts to reduce #ifdefs in code, the SOCKS functions are now
  macros when libcurl is built without proxy support and therefore the FTP
  code could avoid some #ifs.

- RELEASE-NOTES: synced with db59b6202d8

- [Ben Noordhuis brought this change]

  [pop3 starttls] PASS command was not sent after upgrade to TLS.

- [Ben Noordhuis brought this change]

  [pop3 starttls] the command to send is STLS, not STARTTLS.

Dan Fandrich (4 Apr 2011)
- Added http_proxy.c to the Symbian build files

Daniel Stenberg (4 Apr 2011)
- http-proxy: move proxy code to http_proxy.c
  
  The new http_proxy.* files now host HTTP proxy specific code (500+ lines
  moved out from http.c), and as a consequence there is a macro introduced
  for the Curl_proxyCONNECT() function so that code can use it without
  actually supporting proxy (or HTTP) in builds.

- disable cookies: remove ifdefs, move code
  
  1 - make sure to #define macros for cookie functions in the cookie
  header when cookies are disabled to avoid having to use #ifdefs in code
  using those functions.
  
  2 - move cookie-specific code to cookie.c and use the functio
  conditionally as mentioned in (1).
  
  net result: 6 #if lines removed, and 9 lines of code less

Kamil Dudka (4 Apr 2011)
- nss: fix a crash within SSL_AuthCertificate()
  
  The bug was introduced in 806dbb0 (a wrong value was passed in as the
  first argument to the default callback in our wrapper).

Daniel Stenberg (3 Apr 2011)
- multi: shorten lines
  
  We keep them less than 80 columns

- multi: conn goes bad when data change
  
  Within multi_socket when conn is used as a shorthand, data could be
  changed and multi_runsingle could modify the connectdata struct to deal
  with. This bug has not been included in a public release.
  
  Using 'conn' like that turned out to be ugly. This change is a partial
  revert of commit f1c6cd42f474df59.
  
  Reported by: Miroslav Spousta
  Bug: http://curl.haxx.se/bug/view.cgi?id=3265485

Guenter Knauf (1 Apr 2011)
- Increased script version.

- Make use of proxy vars if set.
  
  Posted to the list by Quanah Gibson-Mount [quanah zimbra.com].

- Use var again instead of hard-coded filename.

Daniel Stenberg (29 Mar 2011)
- [Gisle Vanem brought this change]

  typo fix

- curl_easy_setopt.3: mention TFTP read callback flaw
  
  The read callback must return the exact requested amount of data when it
  is used for doing TFTP uploads. This is due to how it deals with data
  internally. This could/should be fixed but for now we document the
  existing behavior.
  
  Reported by: Colin Blair
  Bug: http://curl.haxx.se/mail/lib-2011-03/0319.html

Yang Tse (27 Mar 2011)
- configure: fix libtool warning

Daniel Stenberg (25 Mar 2011)
- [Peter Sylvester brought this change]

  TSL-SRP: enabled with OpenSSL
  
  If a new enough OpenSSL version is used, configure detects the TLS-SRP
  support and enables it.

- RELEASE-NOTES: synced with 11c2db2aa2a

- fix: re-use of bound connections
  
  When asked to bind the local end of a connection when doing a request,
  the code will now disqualify other existing connections from re-use even
  if they are connected to the correct remote host.
  
  This will also affect which connections that can be used for pipelining,
  so that only connections that aren't bound or bound to the same
  device/port you're asking for will be considered.

- symbols-in-versions: make test 1119 happy

- rtsp: move protocol code to dedicated file
  
  The RTSP-specific function for checking for "dead" connection is better
  located in rtsp.c. The code using this is now written without #ifdefs as
  the function call is instead turned into a macro (in rtsp.h) when RTSP
  is disabled.

- MAIL-ETIQUETTE: intro and spam
  
  Added a little generic info section about the lists and a section about
  how to deal with trolls and spam on the lists.

- TODO-RELEASE: 1 fixed, 1 notabug
  
  Fixed:
  
  271 - fix the IPv6-working probing to only exist at one place in the code and
        only get done once
  
  A problem not repeatable and no proper recipe given and therefore simply
  removed for now until we hear something else:
  
  282 - 100 Continue responses should return the "final" HTTP response code:
        "Getting the HTTP response code following a 100 Continue"

- ipv6: only probe once
  
  Move ipv6-functional-probe into a single function that is used from all
  places that need to know.
  
  Make the probe function store the result in a static variable so that
  subsequent invokes just returns the previous result and won't have to
  probe again.

- headers: more copyright headers added

- MAIL-ETIQUETTE: how to behave
  
  This is a new documentation for the source tree. This information has
  been present since a long time at
  http://curl.haxx.se/mail/etiquette.html but now it is put into a plain
  text version too for wider distribution. The web version will be
  automatically generated from this source document.

Julien Chaffraix (21 Mar 2011)
- progress: don't print the last update on a separate line.
  
  Curl_posttransfer is called too soon to add the final new line.
  Moved the new line logic to pgrsDone as there is no more call to
  update the progress status after this call.
  
  Reported by: Dmitri Shubin <sbn_at_tbricks.com>
  http://curl.haxx.se/mail/lib-2010-12/0162.html

Daniel Stenberg (21 Mar 2011)
- TODO-RELEASE: fixed 2, got 3 new!

- [Dave Reisner brought this change]

  libcurl.m4: Add missing quotes in AC_LINK_IFELSE
  
  This avoids warnings generated by autoconf 2.68.
  
  Signed-off-by: Dave Reisner <d@falconindy.com>

- retry-request: rewind if data was sent
  
  When libcurl sends a HTTP request on a re-used connection and detects it
  being closed (ie no data at all was read from it), it is important to
  rewind if any data in the request was sent using the read callback or
  was read from file, as otherwise the retried request will be broken.
  
  Reported by: Chris Smowton
  Bug: http://curl.haxx.se/bug/view.cgi?id=3195205

- configure: avoid $VERSION
  
  To reduce the risk of variable name conflicts, use CURLVERSION instead
  of VERSION.

- symbols-in-versions: many corrections
  
  Scanned with a tool that checked for mistakes and this is the subsequent
  cleanup.

Julien Chaffraix (20 Mar 2011)
- unit1305: Fixed the test to match our coding style.

- url: 0 is PROTOPT_NONE.
  
  Tiny tweak after Daniel's refactoring of the protocol handlers.

Daniel Stenberg (19 Mar 2011)
- pop3: add state name in debug array
  
  We have an array with the state names only built and used when built
  debug enabled and this need to list all the states from the .h

Dan Fandrich (18 Mar 2011)
- Added two more POP3 tests

- pop3: use Curl_safefree() to allow torture tests to succeed

Daniel Stenberg (18 Mar 2011)
- symbol-scan.pl: detect duplicates
  
  Test 1119 now also makes sure that symbols-in-versions doesn't contain
  any duplicates

- CONTRIBUTE: minor edits
  
  Slightly modified to become a nicer web page when converted for the site

- RELEASE-NOTES: synced with 0c05ee3a33d4d7

- pop3: remove unused variable

Dan Fandrich (17 Mar 2011)
- Added support for LISTing a single POP3 message
  
  Added tests for a number of POP3 LIST operations, including one
  that shows a curl problem when listing no messages, so is
  disabled.

- pop3: fixed memory leak in an error retrieval case

Daniel Stenberg (17 Mar 2011)
- symbols-in-versions: remove duplicates

- symbols-in-versions: 2 corrections
  
  CURLE_CHUNK_FAILED and CURLE_FTP_BAD_FILE_LIST were introduced in
  7.21.0, not 7.20.1

- connection setup: if HTTP is disabled asking for HTTP proxy is bad

- FAQ: better english
  
  Reported by: Andre Guibert de Bruet

- scan-build warning
  
  Value stored to 'len' is never read

- ldap_recv: check return code from ldap_get_dn_ber

- compiler warnings fixed
  
  Use (void)[variable] to inhibit unused argument/variables warnings.

- [Ben Noordhuis brought this change]

  SMTP-multi: non-blocking connect
  
  Use Curl_ssl_connect_nonblocking() when upgrading the connection to
  TLS/SSL while using the multi interface.

- [Ben Noordhuis brought this change]

  SMTP in multi mode: use Curl_ssl_connect_nonblocking() when connecting.

- lib582: use curl_socket_t for portability

- buildfix: spell define correctly

Kamil Dudka (15 Mar 2011)
- nss: do not ignore value of CURLOPT_SSL_VERIFYPEER
  
  When NSS-powered libcurl connected to a SSL server with
  CURLOPT_SSL_VERIFYPEER equal to zero, NSS remembered that the peer
  certificate was accepted by libcurl and did not ask the second time when
  connecting to the same server with CURLOPT_SSL_VERIFYPEER equal to one.
  
  This patch turns off the SSL session cache for the particular SSL socket
  if peer verification is disabled.  In order to avoid any performance
  impact, the peer verification is completely skipped in that case, which
  makes it even faster than before.
  
  Bug: https://bugzilla.redhat.com/678580

Guenter Knauf (15 Mar 2011)
- Removed unused var.

Daniel Stenberg (15 Mar 2011)
- configure: stop using the deprecated AM_INIT_AUTOMAKE syntax

- protocol handler cleanup: SSL awareness
  
  As a follow-up to commit 8831000bc0: don't assume that the SSL powered
  protocol alternatives are available.

- ldap: use the new protocol handler setup
  
  Use the new flags field and stop using the old protocol defines.

- TODO-RELEASE: add and remove issues
  
  Removed a fixed issue, added five new existing ones and clarified one of
  the previous ones.

- protocols: use CURLPROTO_ internally
  
  The PROT_* set of internal defines for the protocols is no longer
  used. We now use the same bits internally as we have defined in the
  public header using the CURLPROTO_ prefix. This is for simplicity and
  because the PROT_* prefix was already used duplicated internally for a
  set of KRB4 values.
  
  The PROTOPT_* defines were moved up to just below the struct definition
  within which they are used.

- protocol handler: added flags field
  
  The protocol handler struct got a 'flags' field for special information
  and characteristics of the given protocol.
  
  This now enables us to move away central protocol information such as
  CLOSEACTION and DUALCHANNEL from single defines in a central place, out
  to each protocol's definition. It also made us stop abusing the protocol
  field for other info than the protocol, and we could start cleaning up
  other protocol-specific things by adding flags bits to set in the
  handler struct.
  
  The "protocol" field connectdata struct was removed as well and the code
  now refers directly to the conn->handler->protocol field instead. To
  make things work properly, the code now always store a conn->given
  pointer that points out the original handler struct so that the code can
  learn details from the original protocol even if conn->handler is
  modified along the way - for example when switching to go over a HTTP
  proxy.

Patrick Monnerat (14 Mar 2011)
- - Take new char * options into account in OS400 curl_easy_setopt_ccsid().
  - Keep RPG binding, STRING_* table end check and OS400 README up to date.

Daniel Stenberg (14 Mar 2011)
- FAQ: indent tables
  
  Lines that are indented with at least 5 spaces get special treatment by
  the script that converts it to HTML on the site.

- sslgen: define Curl_ssl_connect_nonblocking for non-SSL
  
  The non-blocking connect improvement for IMAP showed that we didn't
  properly define the Curl_ssl_connect_nonblocking function for non-SSL
  builds.
  
  Reported by: Tor Arntsen

- configure: removed wrongly claimed default paths
  
  Several --with-XXX options claimed the wrong default path in their help
  outputs.
  
  Reported by: Vincent Torri

- [Ask Bj酶rn Hansen brought this change]

  mk-ca-bundle.pl: Only download if modified
  
  Only download and convert the certdata to the ca-bundle.crt if Mozilla
  changed the data
  
  The Perl LWP module (which in a bit of a circular reference is used by
  mk-ca-bundle.pl) is now indirectly using this script. I made this small
  tweak to make it easier to automatically maintain the generated
  ca-bundle.crt file in version control.

- SSH: add protocol lock direction
  
  Some protocols have to call the underlying functions without regard to
  what exact state the socket signals. For example even if the socket says
  "readable", the send function might need to be called while uploading,
  or vice versa. This is the case for libssh2 based protocols: SCP and
  SFTP and we now introduce a define to set those protocols and we make
  the multi interface code aware of this concept.
  
  This is another fix to make test 582 run properly.

- state: add missing state to debug table
  
  As a new state recently was added to the IMAP state machine it has to be
  in the array of names as well as otherwise libcurl crashes when a debug
  version runs...

- test 582: enabled again
  
  Commit ca37692bf43b5ef should now hopefully make it run

- ssh_statemach_act: set cselect for sftp upload
  
  For uploads we want to use the _sending_ function even when the socket
  turns out readable as the underlying libssh2 sftp send function will
  deal with both accordingly. This is what the cselect_bits magic is for.
  
  Fixes test 582.

- RELEASE-NOTES: synced with e649a7baae2

- Revert "test582: enabled"
  
  This reverts commit b8478187406cf625c9d0f10b45a082221130cc92.

- Merge branch 'imap' of https://github.com/bnoordhuis/curl into bnoordhuis-imap

- TODO-RELEASE: fixed four isues
  
  These issues are now addressed:
  
  276 - Karl M's vc makefile patch
  277 - The "Stall when uploading to sftp using multi interface"  bug
  279 - curl_multi_remove_handle() crashes
  280 - Marcus Sundberg's gss patch

- [Karl M brought this change]

  VC: add missing file
  
  http_negotiate_sspi.c was added to the source tree recently

- [Marcus Sundberg brought this change]

  GSS: handle reuse fix
  
  Make GSS authentication work when a curl handle is reused for multiple
  authenticated requests, by always setting negdata->state in
  output_auth_headers().
  
  Signed-off-by: Marcus Sundberg <marcus.sundberg@aptilo.com>

- test583: verify early SSH multi remove handle
  
  This test case is meant to verify that the logic in commit
  60172a0446bbe3f8b actually works. This test failed for me before that
  change and it works after it.

- SFTP: gracefully handle shutdown early
  
  When using the multi interface and a handle using SFTP was removed very
  early on, we would get a segfault due to the code assumed data was there
  that hadn't yet been setup.
  
  Bug: http://curl.haxx.se/mail/lib-2011-03/0066.html
  Reported by: Saqib Ali

- [Manuel Massing brought this change]

  CURL_CHECK_FUNC_RECVFROM: android/bionic fix
  
  recvfrom in bionic (the android libc) deviates from POSIX and uses a
  const in the 5th argument ("const struct sockaddr *") so the check now
  tests for that as well.

- test582: enabled

- PROT_CLOSEACTION: added SFTP and SCP
  
  Both SFTP and SCP are protocols that need to shut down stuff properly
  when the connection is about to get torned down. The primary effect of
  not doing this shows up as memory leaks (when using SCP or SFTP with the
  multi interface).
  
  This is one of the problems detected by test 582.

- readwrite_upload: stop upload at file size
  
  As we know how much to send, we can and should stop once we've sent that
  much data as it avoids having to rely on other mechanisms to detect the
  end.
  
  This is one of the problems detected by test 582.
  
  Reported by: Henry Ludemann <misc@hl.id.au>

- sftp upload: expire to advance state machine
  
  When using the multi_socket API to do SFTP upload, it is important that
  we set a quick expire when leaving the SSH_SFTP_UPLOAD_INIT state as
  there's nothing happening on the socket so there's no read or write to
  wait for, but the next libssh2 API function needs to be called to get
  the ball rolling.
  
  This is one of the problems detected by test 582.
  
  Reported by: Henry Ludemann <misc@hl.id.au>

- test582: improved info messages

- source header: added to more files

- sources: update source headers
  
  All C and H files now (should) feature the proper project curl source
  code header, which includes basic info, a copyright statement and some
  basic disclaimers.

- TODO-RELEASE: add 10 pending issues

- TODO-RELEASE: fix the IPv6-working probing

- tests: phase out haxx.se
  
  Instead of using haxx.se as a fixed magic host name in lots of tests,
  this is a first step to move toward the generic example.com host
  instead.

- test523: avoid using haxx.se
  
  ... since search engines find what they think is a URL in this, they
  hammer www.haxx.se on this port!

- configure: update the copyright year in the output

Dan Fandrich (9 Mar 2011)
- Force setopt constants written by --libcurl to be long

Daniel Stenberg (8 Mar 2011)
- cyassl: fix compiler warnings

- [Todd A Ouska brought this change]

  SSL: (part 2) Added CyaSSL to SSL abstraction layer
  
  This is the modified existing files commit.

- [Todd A Ouska brought this change]

  SSL: Added CyaSSL to SSL abstraction layer
  
  CyaSSL (available from git@github.com:cyassl/cyassl.git) has been
  added to the SSL abstraction layer.
  
  To test:
  1) git CyaSSL sources
  2) autoreconf -i
  3) ./configure --disable-static
  4) make
  5) sudo make install
  6) autoreconf -i
  7) git curl sources (and this patch)
  8) ./configure --disable-shared --with-cyassl --without-ssl --enable-debug
  9) make
  10) normal testing
  
  Please send questions or comments to todd@yassl.com .

- curl.1: clarify -E
  
  Stress that it is for client certificates and then mention that it also
  works for all other SSL-based protocols apart from HTTPS and
  FTPS. Namely POP3S, IMAPS and SMTPS for now.

- FAQ: Protocol xxx not supported or disabled in libcurl

- lib582: used for test 582
  
  Accidentally not included in commit 0e74e1d8d83

Dan Fandrich (7 Mar 2011)
- Fixed libcurl to honour the --disable-ldaps configure option

Daniel Stenberg (8 Mar 2011)
- [Henry Ludemann brought this change]

  sftp-multi: test 582 added
  
  Add test 582 for uploading a file using sftp and the multi interface.
  
  (Patch and test slightly tweaked by Daniel Stenberg)
  
  Initially marked as disabled until it is fixed in the source.

- FAQ: How to SFTP from my user's home directory?

- cpp: correct #endif placement
  
  The end-of-file #endif in rawstr.h was not correcly positioned after all
  prototypes.
  
  Reported by: Boris
  Bug: http://curl.haxx.se/bug/view.cgi?id=3195205

Dan Fandrich (4 Mar 2011)
- Moved test 577 into the unit test framework as test 1307

- Added unit test 1306 so tests 558 & 559 are now fully replaced

- The unit test argument is allowed to be used

- Converted tests 558 & 559 to use the unit test framework as 1305
  
  Test 558 was just a subset of 559 which is something that can be
  easily added later.

- Fixed test 1300 to pass the torture test

- Added abort_* unit test macros
  
  These are for when a test failure makes it impossible to continue
  running further tests.

Kamil Dudka (4 Mar 2011)
- [Stefan Krause brought this change]

  transfer: avoid insane conversion of time_t

Daniel Stenberg (26 Feb 2011)
- ssh_connect: treat libssh2 return code better
  
  libssh2_knownhost_readfile() returns a negative value on error or
  otherwise number of parsed known hosts - this was previously not
  documented correctly in the libssh2 man page for the function.
  
  Bug: http://curl.haxx.se/mail/lib-2011-02/0327.html
  Reported by: murat

Julien Chaffraix (25 Feb 2011)
- http: removed wrong unused comment.
  
  |premature| is used in Curl_http_done.

- http: removed code duplication for stubbed https_getsock function.

Daniel Stenberg (23 Feb 2011)
- RELEASE-NOTES: synced with 2345c1dd661c

- runtests.pl/stopserver: space separate pids
  
  The stopserver function would append pids to kill and could append them
  without separating them with space properly. The result would be a very
  large number that by (some implementations of) kill would be interpreted
  as a negative number and that process group would be wiped...
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3188836
  Reported by: Greg Pratt

Kamil Dudka (22 Feb 2011)
- nss: do not ignore failure of SSL handshake
  
  Flaw introduced in fc77790 and present in curl-7.21.4.
  Bug: https://bugzilla.redhat.com/669702#c16

Daniel Stenberg (21 Feb 2011)
- CURLOPT_SSH_KEYFUNCTION: requires *SSH_KNOWNHOSTS
  
  Extend the docs to clarify that CURLOPT_SSH_KEYFUNCTION is only called
  if the known hosts option is also correctly set!

Julien Chaffraix (20 Feb 2011)
- curl_easy_setopt.3: Removed wrong reference to CURLOPT_USERPASSWORD.
  
  CURLOPT_HTTPAUTH was mentioning CURLOPT_USERPASSWORD instead of
  CURLOPT_PASSWORD.
  
  Reported by: Mike Henshaw

- netrc: Removed _NETRC_DEBUG code.
  
  This is not needed anymore as we have unit testing running on it.

- tests: Cleaned up netrc testing.
  
  Removed the "netrc_debug" keyword replaced with --netrc-file additions.
  Removed the debug code from Curl_parsenetrc as it is superseeded by
  --netrc-file.

- curl: Added --netrc-file.
  
  This enables people to specify a path to the netrc file to use.
  The new option override --netrc if both are present. However it
  does follow --netrc-optional if specified.

Ben Noordhuis (20 Feb 2011)
- IMAP in multi mode: use Curl_ssl_connect_nonblocking() when upgrading the connection to TLS/SSL.

- IMAP in multi mode: use Curl_ssl_connect_nonblocking() when connecting.

Daniel Stenberg (18 Feb 2011)
- [Mike Crowe brought this change]

  multi: close connection on timeout
  
  After a request times out, the connection wasn't properly closed and
  prevented to get re-used, so subsequent transfers could still mistakenly
  get to use the previously aborted connection.

- multi: better failed connect treatment
  
  When failing to connect the protocol during the CURLM_STATE_PROTOCONNECT
  state, Curl_done() has to be called with the premature flag set TRUE as
  for the pingpong protocols this can be important.
  
  When Curl_done() is called with premature == TRUE, it needs to call
  Curl_disconnect() with its 'dead_connection' argument set to TRUE as
  well so that any protocol handler's disconnect function won't attempt to
  use the (control) connection for anything.
  
  This problem caused the pingpong protocols to fail to disconnect when
  STARTTLS failed.
  
  Reported by: Alona Rossen
  Bug: http://curl.haxx.se/mail/lib-2011-02/0195.html

- [Hoi-Ho Chan brought this change]

  PolarSSL: Return 0 on receiving TLS CLOSE_NOTIFY alert
  
  Signed-off-by: Hoi-Ho Chan <hoiho.chan@gmail.com>

- symbols-in-versions: sorted
  
  I forgot to sort it when I added the CURL_SOCKOPT_* symbols

- TODO-RELEASE: refresh

- SOCKOPTFUNCTION: documented new return codes

- SOCKOPTFUNCTION: callback can say already-connected
  
  Introducing a few CURL_SOCKOPT* defines for conveniance. The new
  CURL_SOCKOPT_ALREADY_CONNECTED signals to libcurl that the socket is to
  be treated as already connected and thus it will skip the connect()
  call.

Kamil Dudka (17 Feb 2011)
- nss: avoid memory leak on SSL connection failure

Daniel Stenberg (17 Feb 2011)
- RELEASE-NOTES: fresh start towards 7.21.5

- curlver.h: bump to 7.21.5

- THANKS: add contributors from 7.21.4

Version 7.21.4 (17 Feb 2011)

Guenter Knauf (17 Feb 2011)
- Set -fpcc-struct-return only for gcc compiler.

Daniel Stenberg (17 Feb 2011)
- RELEASE-NOTES: credits since 7.21.3
  
  I went through all the names mentioned as authors and in commit messages
  since 7.21.3, and this list inserted now is sorted on first name.

- nss_load_key: fix unused variable warning

- gmtime: remove define
  
  It turns out some systems rely on the gmtime or gmtime_r to be defined
  already in the system headers and thus my "precaution" redefining of
  them only caused trouble. They are now removed.

Guenter Knauf (13 Feb 2011)
- Added -m32 to CFLAGS to compile with x86_64 gcc.

- Updated OpenSSL version, added links to docu.

Daniel Stenberg (10 Feb 2011)
- RELEASE-NOTES: synced with 3bb1291fbd4

- --keepalive-time: warn if not supported properly
  
  Since the feature requires support for TCP_KEEPIDLE and TCP_KEEPINTVL to
  function as documented, it now warns if that support is missing when the
  option is used.

Dan Fandrich (10 Feb 2011)
- Call ERR_peek_error instead of ERR_peek_last_error
  
  The latter isn't available in older OpenSSL versions, and is
  less useful since it returns the most recent error instead of
  the first one encountered.

Julien Chaffraix (10 Feb 2011)
- netrc: Enable setting up the filename in unit tests.
  
  Unset the environment variable so that we can specify different
  filenames in the unit test.

- test1304: Added some unit tests for Curl_parsenetrc.
  
  Moved some definitons into the header file so that we can reuse them.

Daniel Stenberg (9 Feb 2011)
- [Quinn Slack brought this change]

  CURLE_TLSAUTH_FAILED: removed
  
  On second thought, I think CURLE_TLSAUTH_FAILED should be eliminated. It
  was only being raised when an internal error occurred while allocating
  or setting the GnuTLS SRP client credentials struct. For TLS
  authentication failures, the general CURLE_SSL_CONNECT_ERROR seems
  appropriate; its error string already includes "passwords" as a possible
  cause. Having a separate TLS auth error code might also cause people to
  think that a TLS auth failure means the wrong username or password was
  entered, when it could also be a sign of a man-in-the-middle attack.

- [Quinn Slack brought this change]

  TLS-SRP: new options documented

- CURLOPT_SOCKOPTFUNCTION: return proper error code
  
  When the callback returns an error, this function must make sure to return
  CURLE_ABORTED_BY_CALLBACK properly and not CURLE_OK as before to allow the
  callback to properly abort the operation.

- curl.1: typo in -v description
  
  Reported by: Ian D Allen
  Bug: https://bugs.launchpad.net/ubuntu/+source/curl/+bug/714895
  
  Forwarded to us by:
  
  Reported by: Andreas Olsson
  Bug: http://curl.haxx.se/bug/view.cgi?id=3175422

Julien Chaffraix (7 Feb 2011)
- netrc: Removed dead code.
  
  The main has not been updated from some time and is out of sync with
  the code. The code is now tested by several test cases so no need for
  a seperate code path.

- netrc: Tightened up the type checks.
  
  The state should not be anonymous so that we can check if the values
  are fine. Added 2 unreachables states to the switch as a result of this
  change.

- imap: Fixed typo in a comment.

Daniel Stenberg (7 Feb 2011)
- Curl_gmtime: avoid future mistakes
  
  Document Curl_gmtime() and define away the old functions so that they
  won't be used internally again by mistake.

- Curl_gmtime: added a portable gmtime
  
  Instead of polluting many places with #ifdefs, we create a single place
  for this function, and also check return code properly so that a NULL
  pointer returned won't cause problems.

Guenter Knauf (3 Feb 2011)
- mk-ca-bundle.vbs: use new cacert url
  
  The official Mozilla page at http://www.mozilla.org/projects/security/certs/
  points out a new place as the "proper" place to get Mozilla's CA certs from
  so this script is now updated to use that instead.
  
  Reported by: Daniel Mentz

Daniel Stenberg (2 Feb 2011)
- mk-ca-bundle.pl: use new cacert url
  
  The official Mozilla page at
  http://www.mozilla.org/projects/security/certs/ points out a new place
  as the "proper" place to get Mozilla's CA certs from so this script is
  now updated to use that instead.
  
  Reported by: Daniel Mentz

- [Bjoern Sikora brought this change]

  ssluse: improved error message on SSL_CTX_new failures
  
  "SSL: couldn't create a context" really isn't that helpful, now it'll
  also extract an explanation from OpenSSL and append to the right.

- [Nicholas Maniscalco brought this change]

  multi: fix CURLM_STATE_TOOFAST for multi_socket
  
  The code in the toofast state needs to first recalculate the values
  before it uses them again since it may have been a while since it last
  did it when it reaches this point.

- unit1300: code style cleanup

- [Amr Shahin brought this change]

  adding unit tests for Curl_llist_remove

Patrick Monnerat (31 Jan 2011)
- Include TLSAUTH options in ILE/RPG binding.

Kamil Dudka (31 Jan 2011)
- [Dave Reisner brought this change]

  file: add support for CURLOPT_TIMECONDITION

- [Dave Reisner brought this change]

  transfer: add Curl_meets_timecondition()
  
  This will be used by file_do() and Curl_readwrite() as a unified method
  of checking to see if a remote document meets the supplied
  CURLOPT_TIMEVAL and CURLOPT_TIMECONDITION.
  
  Signed-off-by: Dave Reisner <d@falconindy.com>

Daniel Stenberg (29 Jan 2011)
- FAQ: clarified/expanded 6.7 a bit
  
  "6.7 What are my obligations when using libcurl in my commercial apps?"
  got the piece about what exactly "in all copies" mean to a user of the
  code.
  
  This interpretation is based on what other MIT-like licenses have made
  more explicit.

- COPYING: update the year to 2011
  
  The generic copyright year range now includes 2011

- [Pierre Joye brought this change]

  Windows build: alternative makefile
  
  This is a separate makefile for MSVC builds. It is deliberately put in
  another dir than src/ and lib/ to allow a different build experience
  than the previous - at least during a period. Eventually we should
  unify.

- test: add test 580 to the dist

Dan Fandrich (27 Jan 2011)
- Some minor edits including updates to function names

Daniel Stenberg (27 Jan 2011)
- ares: memory leak fix
  
  The double name resolve trick used with c-ares could leave allocated
  memory in 'temp_ai' if the operation was aborted in the middle.

- ares_query_completed_cb: don't touch invalid data
  
  When this callback is called due to the destruction of the ares handle,
  the connection pointer passed in as an argument may no longer pointing
  to valid data and this function doesn't need to do anything with it
  anyway so we make sure it doesn't.
  
  Bug: http://curl.haxx.se/mail/lib-2011-01/0333.html
  Reported by: Vsevolod Novikov

Kamil Dudka (27 Jan 2011)
- nss: avoid memory leaks and failure of NSS shutdown
  
  ... in case more than one CA is loaded.
  
  Bug: https://bugzilla.redhat.com/670802

Dan Fandrich (26 Jan 2011)
- Mention that sftp quote commands can be quoted

Daniel Stenberg (25 Jan 2011)
- tests: more multiple headers checks

- HTTP: memory leak on multiple Location:
  
  The HTTP parser allocated memory on each received Location: header
  without properly freeing old data. Starting now, the code only considers
  the first Location: header and will blissfully ignore subsequent ones.
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3165129
  Reported by: Martin Lemke

- FAQ: clarify 5.13 how to stop a transfer

Guenter Knauf (22 Jan 2011)
- Fixed C++ style comment not allowed in ISO C90.

Dan Fandrich (21 Jan 2011)
- Mention axTLS in some more documentation

Daniel Stenberg (20 Jan 2011)
- runtests.pl: make -s not show skipped tests

- [Amr Shahin brought this change]

  unittest: add 3 tests to test1300
  
  Testing Curl_llist_insert_next

Dan Fandrich (20 Jan 2011)
- [Darshan Mody brought this change]

  Fixed compile using OpenSSL versions < 0.9.4a

Daniel Stenberg (19 Jan 2011)
- main: make the tlsauth options always present
  
  ... to not make the connection between the tool and the libcurl used
  tighter than necessary, the tlsauth options are now always present but
  if the used libcurl doesn't have TLSAUTH support it will return failure.
  
  Also, replaced strncmp() with strequal to get case insensitive matching.

- symbols-in-versions: add the new TLSAUTH-SRP symbols

- configure: TLS-SRP wasn't added as a feature
  
  Test case 1014 failed since TLS-SRP was correctly set to the features
  variable so curl-config --features didn't output it.

- dist: add new certs to tarball

- [Quinn Slack brought this change]

  TLS-SRP: support added when using GnuTLS

- CURLOPT_SSL_VERIFYPEER: more clarifications
  
  The default value is 1.
  
  curl _uses_ a default CA bundle, it doesn't install one.
  
  Drop the references to 7.10 as that is now >8 years old!

- TheArtOfHttpScripting: extended
  
  Extended the intial HTTP protcol part and added a mention of --trace and
  --trace-ascii.
  
  Replaced most URLs in the text to use example.com instead of all the
  made up strange names.
  
  Shortened a bunch of lines.

- curl_easy_setopt.3: clarify VERIFYHOST/PEER
  
  Extended the descriptions somewhat and made the options get listed next
  to each other.

- RELEASE-NOTES: mention contributors

- RELEASE-NOTES: synced with 7fcbdd68b9e

Guenter Knauf (18 Jan 2011)
- Fixed configure define for Win32.
  
  Submitted by Vincent Torri.

Kamil Dudka (18 Jan 2011)
- nss: fix a bug in handling of CURLOPT_CAPATH
  
  ... and update the curl.1 and curl_easy_setopt.3 man pages such that
  they do not suggest to use an OpenSSL utility if curl is not built
  against OpenSSL.
  
  Bug: https://bugzilla.redhat.com/669702

Guenter Knauf (17 Jan 2011)
- Avoid redefines.

Daniel Stenberg (15 Jan 2011)
- curl.1: fix spelling
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3157232
  Reported by: John Bradshaw

Guenter Knauf (14 Jan 2011)
- Added casts to silent gcc warnings.

Yang Tse (13 Jan 2011)
- build: BCC - makefile.b32 tweak
  
  Get rid of stdout redirection to NUL and move stderr redirection
  into RM and RMDIR macros.

- build: BCC - makefile.b32 tweak
  
  Check for BCCDIR environment var done now as other checks.

Guenter Knauf (13 Jan 2011)
- Use env var for PSDK instead of hardcoded path.

- Enabled SSPI support by default.

- Use MAKE macro with BCC targets.

Yang Tse (12 Jan 2011)
- docs - update BCC INSTALL section

- build: BCC - require Borlands's MAKE for Makefile.b32 processing.

- build: BCC - recover lost functionality from commit 3d813204260b37289411
  
  Borland's $(MAKEDIR) expands to the path where make.exe is located,
  use this feature to define BCCDIR when user has not defined BCCDIR.

- build: use external preprocessor cpp32 when building with Borland C

- build: allow usage of Borland 5.5.1 external preprocessor cpp32

Guenter Knauf (11 Jan 2011)
- Disable LDAP support since BCC headers are insufficient.

- Instead of exiting with error lets set BCCDIR self.

- Some Borland C++ makefile tweaks.

- Borland C++ doesnt have struct sockaddr_storage.

Daniel Stenberg (11 Jan 2011)
- connect: use UDP correctly
  
  The idea that the protocol and socktype is part of name resolving in the
  libc functions is nuts. We keep the name resolver functions assume
  TCP/STREAM and we make sure that when we want to connect to a UDP
  service we use the correct UDP/DGRAM set instead. This bug was because
  the ->protocol field was not always set correctly.
  
  This bug was only affecting ipv6-disabled non-cares non-threaded builds.
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3154436
  Reported by: "dperham"

- [Quinn Slack brought this change]

  SSL: fix memory leak
  
  In OOM situation. Follow-up fix to commit a9cd4f4ed49e1a0.

- gtls: fix memory leak
  
  Bug: http://curl.haxx.se/mail/lib-2011-01/0079.html
  Reported by: Quinn Slack

- [Marcel Roelofs brought this change]

  HTTP: HTTP Negotiate authentication using SSPI
  
  Only under Windows

- cmake: removed two files
  
  CMake/CheckTypeSize.c.in and CMake/CheckTypeSize.cmake were removed in
  the previous cmake commit

Dan Fandrich (5 Jan 2011)
- Made unit_setup() return an error code to abort the test early
  
  This makes it possible to skip the call to unit_stop() in such
  cases.  Also use Curl_safefree() in unit test 1302 so it will
  pass the memory torture test.

Daniel Stenberg (6 Jan 2011)
- SSH: speedcheck clobbered existing error
  
  The just added speedcheck must not ruin the error code if already set
  due to a problem.

- [Brad King brought this change]

  CMake: Use upstream CheckTypeSize module
  
  The CheckTypeSize module that comes with CMake 2.6.2 and above does
  everything we need and also supports cross-compiling.  Avoid duplicating
  an older version of it here.  This also fixes a cross-compiling error
  because the old line
  
    include ("${CMAKE_MODULE_PATH}/CheckTypeSize.cmake")
  
  failed because CMAKE_MODULE_PATH is a search path and not a directory.
  
  Signed-off-by: Brad King <brad.king@kitware.com>

- SSH: acknowledge speedcheck
  
  Check for speedcheck limits during the state machine traversals

- tests: <info> tag corrections

- unittest: 1303 tests Curl_timeleft
  
  I came up with 33 different ways to call it and verify that it returns the
  correct return code.

- curlcheck.h: add fail()
  
  fail is a new function/macro that a test case can use to indicate a test
  failure for cases when the standard macros are not sufficient.

- Curl_timeleft: s/conn/data in first argument
  
  As the function doesn't really use the connectdata struct but only the
  SessionHanadle struct I modified what argument it wants.

Dan Fandrich (4 Jan 2011)
- Fixed path to allow out-of-tree builds

Kamil Dudka (4 Jan 2011)
- nss: avoid CURLE_OUT_OF_MEMORY given a file name without any slash
  
  Bug: https://bugzilla.redhat.com/623663

Daniel Stenberg (4 Jan 2011)
- ignore: all executable unit test cases

- tests: add 1302 to the package

- unittest: test base64 encode/decode

- curlcheck.h: avoid using NULL pointers

- curlcheck.h: add verify_memory
  
  This check verifies that a pointer contains the correct data.

- curlcheck.h: add newlines in error messages

- unittest: verify curl_strequal

- get_cert_chain: support larger data sets
  
  512 bytes turned out too short for some data, so now we allocate a
  larger buffer instead
  
  Bug: http://curl.haxx.se/mail/archive-2011-01/0002.html

- RELEASE-NOTES: synced with 83e9fb21aabbec2

- curlcheck.h: add fail_if() fix code
  
  The UNITTEST_START and UNITTEST_STOP defines needed to do a new brace
  level so that test cases can declare variables fine and still remain
  fine C89 code.

- unittests: basic docs

- ignore: unit test files

- unittests: a dedicated feature in tests
  
  The test runner script now knows if unittests can run and the unit test
  setup file says it is one. I also made runtests.pl deal with no
  <command> tag set, so that the description file can get even simpler.

- unittesting: build a separate static lib
  
  When configure --enable-debug has been used, all files in lib/ are now
  built twice and a separate static library crafted for unit-testing will
  be linked. The unit tests in the tests/unit subdir will use that
  library.

- unittest: framework for unit-testing
  
  This is the first approach at doing fairly clean and easy to write and
  debug unit tests.

- SSH: avoid PATH_MAX with alloc
  
  We cannot assume that PATH_MAX will be enough for the remote path name
  so allocating room for it is the only sensible approach.

- TODO: get rid of PATH_MAX

- Curl_nss_connect: avoid PATH_MAX
  
  Since some systems don't have PATH_MAX and it isn't that clever to
  assume a fixed maximum path length, the code now allocates buffer space
  instead of using stack.
  
  Reported by: Samuel Thibault
  Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=608521

- SFTP: make pwd output result to header callback
  
  Sending "pwd" as a QUOTE command only sent the reply to the
  DEBUGFUNCTION. Now it also sends an FTP-like header to the header
  callback to allow similar operations as with FTP, and apps can re-use
  the same parser.

- pubkey_show: allocate buffer to fit any-size result
  
  The loop condition was wrong so keys larger than 340 bits would overflow
  the local stack-based buffer.

- CURLINFO_FTP_ENTRY_PATH: sftp support

- [Luke Amery brought this change]

  ssh: honour the CURLINFO_FTP_ENTRY_PATH curl_getinfo option

- [Pierre Joye brought this change]

  IDN: use win32 API if told to
  
  The functionality is provided in a new source file: lib/idn_win32.c

Yang Tse (28 Dec 2010)
- test harness: take in account that Windows does not support LD_PRELOAD
  
  configure.ac: Test harness libhostname library will not be built for Windows.
  
  runtests.pl: LD_PRELOAD mechanism will not be used to load libhostname
  library on operating systems which lack LD_PRELOAD support.

Daniel Stenberg (27 Dec 2010)
- c-ares: fix cancelled resolves
  
  When built IPv6-enabled, we could do Curl_done() with one of the two
  resolves having returned already, so when ares_cancel() is called the
  resolve callback ends up doing funny things (sometimes resulting in a
  segfault) since it would try to actually store the previous resolve even
  though we're shutting down the resolve.
  
  This bug was introduced in commit 8ab137b2bc9630ce so it hasn't been
  included in any public release.
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3145445
  Reported by: Pedro Larroy

- [Brad Hards brought this change]

  Typo / spelling fixes.

- [Brad Hards brought this change]

  Use angle address, as for the rest of the example.
  
  Also spelling fix for RECIPIENT #define.

- [Brad Hards brought this change]

  Add angle brackets to addresses in easy SMTP examples, as for smtp-multi example.

- cookies: tricked dotcounter fixed
  
  Providing multiple dots in a series in the domain field (domain=..com) could
  trick the cookie engine to wrongly accept the cookie believing it to be
  fine. Since the tailmatching would then match all .com sites, the cookie would
  then be sent to all of them.
  
  The code now requires at least one letter between each dot for them to be
  counted. Edited test case 61 to verify this.

- multi: connect fail => use next IP address
  
  When using the multi interface and connecting to a host name that
  resolves to multiple IP addresses, there was no logic that made it
  continue to the next IP if connecting to the first address times
  out. This is now corrected.

- smtp-multi: put recipient within <brackets>
  
  Even if libcurl might to do it for us, it is more correct.

- ossl_seed: no more RAND_screen
  
  RAND_screen() is slow, not thread-safe and not needed anymore since OpenSSL
  uses the thread-safe win32 CryptoAPI nowadays.

- multi: inhibit some verbose outputs
  
  The info about pipe status and expire cleared are clearly debug-related
  and not anything mere mortals will or should care about so they are now
  ifdef'ed DEBUGBUILD

- SMTP tests: updated MAIL FROM use
  
  They were all wrong previously since none used the <brackets> they
  should for MAIL FROM. Now libcurl adds them itself if the app doesn't so
  they end up wrong less easy.

- CURLOPT_MAIL_FROM: document the bracket situation

- [Brad Hards brought this change]

  SMTP: add brackets for MAIL FROM
  
  Similar to what is done already for RCPT TO, the code now checks for and
  adds angle brackets (<>) around the email address that is provided for
  CURLOPT_MAIL_RCPT unless the app has done so itself.

Guenter Knauf (22 Dec 2010)
- Added support for axTLS to NetWare build.

- Fixed include: memory.h -> curl_memory.h.

Kamil Dudka (22 Dec 2010)
- [Brad Hards brought this change]

  smtp-tls: add a missing newline
  
  Without this you won't get the next (Subject) line.

Daniel Stenberg (21 Dec 2010)
- [Brad Hards brought this change]

  Typo fixes.

Patrick Monnerat (21 Dec 2010)
- New curl/curl.h definitions added to ILE/RPG binding.

Yang Tse (21 Dec 2010)
- build: sort configuration hunks in lib/Makefile.vc6
  
  sorted to reflect same internal order as the one shown
  in the usage message.

Daniel Stenberg (20 Dec 2010)
- getparameter: add error check
  
  if add2list() returns an error, bail out!

- loadhostpairs: return errorcode
  
  Make sure that Curl_cache_addr() errors are propagated to callers of
  loadhostpairs().
  
  (this loadhostpairs function caused a scan-build warning due to the
  'dns' variable getting assigned but never used)

Yang Tse (20 Dec 2010)
- distrib: add new file to EXTRA_DIST

- build: refactoring of msvc makefiles to allow overriding of library filenames.
  
  Default libcurl's file names are kept equal to those used since Y2K.

Daniel Stenberg (19 Dec 2010)
- ftp_parselist: fix compiler warning
  
  Doing curlx_strtoofft() on the size just to figure out the end of it
  causes a compiler warning since the result wasn't used, but is also a
  bit of a waste.

- [Pasha Kuznetsov brought this change]

  Curl_do: avoid using stale conn pointer
  
  Since the original `conn' pointer was used after the `connectdata' it
  points to has been closed/cleaned up by Curl_reconnect_request it caused
  a crash. We must make sure to use the newly created connection instead!
  
  URL: http://curl.haxx.se/mail/lib-2010-12/0202.html

- [Tommie Gannert brought this change]

  ares: ask for both IPv4 and IPv6 addresses
  
  Make the c-ares resolver code ask for both IPv4 and IPv6 addresses when
  IPv6 is enabled.
  
  This is a workaround for the missing ares_getaddrinfo() and is a lot
  easier to implement.
  
  Note that as long as c-ares returns IPv4 addresses when IPv6 addresses
  were requested but missing, this will cause a host's IPv4 addresses to
  occur twice in the DNS cache.
  
  URL: http://curl.haxx.se/mail/lib-2010-12/0041.html

- examples: socket type cleanup

- [Brad Hards brought this change]

  Trival comment fix.

- [Brad Hards brought this change]

  smtp-tls: add Message-ID: header

- gitignore: ignore the new example execs

- examples: fix compiler warnings

- examples: build all examples easier

- [Brad Hards brought this change]

  smtp-tls: new example
  
  This example shows how to send SMTP with TLS

- [Brad Hards brought this change]

  Docs: add simple SMTP example
  
  Add a simple SMTP example program, patterned after some of the existing
  examples, and the curl application.
  
  This version addresses issues raised by David Woodhouse on comments in
  the simplesmtp.c example.

Kamil Dudka (17 Dec 2010)
- [Paul Howarth brought this change]

  tftpd: avoid buffer overflow report from glibc

Daniel Stenberg (17 Dec 2010)
- example: fix compiler warnings in fopen.c

- [Brad Hards brought this change]

  chkspeed: bad strtol() call for -M option
  
  Bug: http://curl.haxx.se/mail/lib-2010-12/0192.html

Yang Tse (16 Dec 2010)
- axTLS integration: silence runtests.pl perl warning

Daniel Stenberg (15 Dec 2010)
- axTLS: mention it among the other SSL libs

- 7.21.4: version bump

- axtls_connect: allow connect without peer verification
  
  The SSL_SERVER_VERIFY_LATER bit in the ssl_ctx_new() call allows the
  code to verify the peer certificate explicitly after the handshake and
  then the "data->set.ssl.verifypeer" option works.

- axTLS: allow "default" SSL version as well
  
  When no explicit version is selected we should try to use whatever is
  best for us, and in the axTLS case that means TLSv1.

- axtls.c: cleanup
  
  Removed trailing whitespace
  Removed several compiler warnings
  Removed odd backslashes at some line endings

- urldate: undef hideous memory defines
  
  The public axTLS header (at least as of 1.2.7) redefines the memory
  functions. We #undef those again immediately after the public header to
  limit the damage. This should be fixed in axTLS.

- configure: make --with-axtls set prefix
  
  In tradition with other options, have this point to the directory prefix
  and not the lib directory. Otherwise we can't set the include path
  reliably.

- [Eric Hu brought this change]

  Minor fixes to pass tests 301 and 306 with a patched axTLS.

- [Eric Hu brought this change]

  Initial axTLS integration. Connections can be made and some tests pass.
  
  Failed HTTPS tests: 301, 306, 311, 312, 313, 560
  311, 312 need more detailed error reporting from axTLS.
  313 relates to CRL, which hasn't been implemented yet.

- [Eric Hu brought this change]

  Simple update to configure script to notify user of --with-axtls switch.

- [Eric Hu brought this change]

  Preparing for axTLS. Actual SSL API functions are only stubbed.
  
  Added axTLS to autotool files and glue code to misc other files.
  axtls.h maps SSL API functions, but may change.
  axtls.c is just a stub file and will definitely change.

- THANKS: added contributors from 7.21.3

Version 7.21.3 (15 Dec 2010)

Daniel Stenberg (15 Dec 2010)
- RELEASE-NOTES: synced with a865bd9fbaaa43e5c

- IsPipeliningPossible: only for HTTP
  
  The function that checks if pipelining is possible now requires the HTTP
  bit to be set so that it doesn't mistakenly tries to do it for other
  protocols.
  
  Bug: http://curl.haxx.se/mail/lib-2010-12/0152.html
  Reported by: Dmitri Shubin

- multi_runsingle: don't timeout completed handles
  
  The generic timeout code must not check easy handles that are already
  completed. Going to completed (again) within there risked decreasing the
  number of alive handles again and thus it could go negative.
  
  This regression bug was added in 7.21.2 in commit ca10e28f06f1

- symbols-in-versions: CURLOPT_KEYPASSWD fixed
  
  It was added in 7.17.0 and is not deprecated

- RELEASE-NOTES: synced with c28443c551825

Dan Fandrich (8 Dec 2010)
- Mention that using other libraries can affect app licensing

Yang Tse (7 Dec 2010)
- easy: fix compiler warning: end-of-loop code not reached

Daniel Stenberg (6 Dec 2010)
- disconnect: pass on the dead_connection argument
  
  Cleanup fix after Kamil's commit 5c7c9a768d0093

Yang Tse (6 Dec 2010)
- sws: fix compier warning: external definition with no prior declaration

Daniel Stenberg (6 Dec 2010)
- [Heinrich Ko brought this change]

  ossl_connect_common: detect connection re-use
  
  ossl_connect_common() now checks whether or not 'struct
  connectdata->state' is equal 'ssl_connection_complete' and if so, will
  return CURLE_OK with 'done' set to 'TRUE'. This check prevents
  ossl_connect_common() from creating a new ssl connection on an existing
  ssl session which causes openssl to fail when it tries to parse an
  encrypted TLS packet since the cipher data was effectively thrown away
  when the new ssl connection was created.
  
  Bug: http://curl.haxx.se/mail/lib-2010-11/0169.html

Kamil Dudka (6 Dec 2010)
- url: provide dead_connection flag in Curl_handler::disconnect
  
  It helps to prevent a hangup with some FTP servers in case idle session
  timeout has exceeded.  But it may be useful also for other protocols
  that send any quit message on disconnect.  Currently used by FTP, POP3,
  IMAP and SMTP.

Yang Tse (6 Dec 2010)
- ssh: fix a download resume point calculation

Daniel Stenberg (5 Dec 2010)
- Curl_wait_for_resolv: correct timeout
  
  When looping in this function and checking for the timeout being
  expired, it was not updating the reference time when calculating the
  timediff since previous round which made it think each subsequent loop
  to have taken longer than it actually did.
  
  I also modified the function to use the generic Curl_timeleft() function
  instead of the custom logic.
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3112579

- Curl_send/recv_plain: return errno on failure
  
  When send() and recv() fail, we now store the errno value to allow the
  app to access it.
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3128121
  Reported by: Yuri

Guenter Knauf (5 Dec 2010)
- Updated OpenSSL version.

Yang Tse (4 Dec 2010)
- fix compiler warning: conversion may lose significant bits

- fix compiler warning: assignment within conditional expression

- fix getinfo CURLINFO_LOCAL* for reused connections (take 2) follow-up
  
  - Show address string from proper buffer in case of connection failure.
  
  - Try next address when inet_ntop() fails.

Daniel Stenberg (3 Dec 2010)
- version-check: added brief documentation
  
  and the traditional source header

Yang Tse (3 Dec 2010)
- build: provide SIZEOF_SIZE_T DOS definition

- build: lib/config.dos renamed to lib/config-dos.h

- build: provide SIZEOF_SIZE_T VMS definition

- build: move config-vms.h from subdir 'packages/vms' into 'lib'

- build: provide SIZEOF_SIZE_T definition for non-configure builds

- build: provide SIZEOF_SIZE_T netware definition

- configure: undo using autobuilds to temporarily verify strict aliasing warnings.

- fix compiler warning: rounding, sign extension, or loss of accuracy may result

- fix compiler warning: statement is not reachable

- fix compiler warning: conversion may lose significant bits

- connect: fix compiler warning: unused variable

- fix getinfo CURLINFO_LOCAL* for reused connections (take 2)

- fix getinfo CURLINFO_LOCAL* for reused connections follow-up
  
  Reinstate IPV6 build variable that got removed.

- fix getinfo CURLINFO_LOCAL* for reused connections
  
  Failed to commit this file changes along with the others.

- fix getinfo CURLINFO_LOCAL* for reused connections

- atoi: remove atoi usage

- multi: fix compiler warning: conversion may lose significant bits follow-up

- ftp: fix 'bool' data type implementation dependant usage

- multi: fix compiler warning: conversion may lose significant bits

- multi: fix compiler warning: enumerated type mixed with another type

- hostip: edit comment

- xattr: fix compiler warning: enumerated type mixed with another type

- s/isspace/ISSPACE

- symbol-scan: use configure script knowledge about how to run the C preprocessor

- ignore file generated by configure

- curl_multi_info_read: fix compiler warning: conversion may lose significant bits

- inet_pton: fix compiler warning
  
  warning C4146: unary minus operator applied to unsigned type, result still unsigned

- Curl_getaddrinfo_ex: sanitize function results follow-up.

- Curl_getaddrinfo_ex: sanitize function results.
  
  Ensure that spurious results from system's getaddrinfo() ares not propagated
  by Curl_getaddrinfo_ex() into the library.
  
  Also ensure that the ai_addrlen member of Curl_getaddrinfo_ex()'s output linked
  list of Curl_addrinfo structures has appropriate family-specific address size.

Kamil Dudka (22 Nov 2010)
- openldap: use remote port in URL passed to ldap_init_fd()
  
  ... not the proxy port.  It makes no difference unless a proxy is used.

Yang Tse (20 Nov 2010)
- gtls: define and use gtls_EAGAIN, gtls_EINTR and gtls_EIO.
  
  Winsock builds clobber some errno.h defines in setup_once.

Dan Fandrich (19 Nov 2010)
- Added a couple examples that were missing from the tar ball

- Check for errors while preprocessing curl.h in test 1119
  
  This showed a problem when running the test out-of-tree, so
  an include path is now being added to pick up the generated
  curlbuild.h file.

- Use the 3-argument open for compatibility with older perls

- [Matthias Bolte brought this change]

  Detect socket errors in GnuTLS on Windows
  
  On Windows, translate WSAGetLastError() to errno values as GNU
  TLS does it internally, too. This is necessary because send() and
  recv() on Windows don't set errno when they fail but GNU TLS
  expects a proper errno value.
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3110991

Yang Tse (19 Nov 2010)
- test servers: fix strict aliasing compiler warnings

- configure: use autobuilds to temporarily verify strict aliasing warnings.
  
  Temporarily, When cross-compiling with gcc 3.0 or later, enable strict aliasing
  rules and warnings. Given that cross-compiled targets autobuilds do not run the

Julien Chaffraix (17 Nov 2010)
- configure: Prevent link errors with --librtmp.
  
  If --librtmp was specified but pkg-config could not find the librtmp
  file, we would have undefined symbols when linking curl.
  
  We prevent this error by disabling this case as suggested on the mailing
  list.

Daniel Stenberg (15 Nov 2010)
- RELEASE-NOTES: synced with cbf4961bf3e4

- gnutls->handshake: improved timeout handling
  
  When no timeout is set, we call the socket_ready function with a timeout
  value of 0 during handshake, which makes it loop too much/fast in this
  function. It also made this function return CURLE_OPERATION_TIMEDOUT
  wrongly on a slow handshake.
  
  However, the particular bug report that highlighted this problem is not
  solved by this fix, as this fix only makes the more proper error get
  reported instead.
  
  Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=594150
  Reported by: Johannes Ernst

Julien Chaffraix (13 Nov 2010)
- urldata: Capitalize enum protect_level values.
  
  This makes it easier to spot the enum values from the variables.
  Removed some unneeded DEBUGASSERT added in the previous commit.

- security: tighten enum protection_level usage.
  
  While changing Curl_sec_read_msg to accept an enum protection_level
  instead of an int, I went ahead and fixed the usage of the associated
  fields.
  
  Some code was assuming that prot_clear == 0. Fixed those to use the
  proper value. Added assertions prior to any code that would set the
  protection level.

Yang Tse (13 Nov 2010)
- configure: fix autoconf 2.68 warning: no AC_LANG_SOURCE call detected in body

Daniel Stenberg (12 Nov 2010)
- curl.1: "a file", not an

- version-check.pl: display version number for symbols
  
  This script is the start of a helper tool that scans a source code and
  outputs the most recent libcurl version it finds symbols for. Meaning
  that if there's no conditions in the code, that's the earliest libcurl
  version the scanned code requires.
  
  It is not added to the Makefile.am yet as it is still a bit crude, but
  I'm committing it to keep it and allow us to work on it.

- [Adam Light brought this change]

  Makefile.vc6: fixed the xattr.c compile

Julien Chaffraix (12 Nov 2010)
- krb5: Use GSS_ERROR to check for error.
  
  This is the advised way of checking for errors in the GSS-API RFC.
  Also added some '\n' to the error message so that they are not mixed
  with other outputs.

- security: Pass the right parameter to init.
  
  init is expecting app_data. Passing it the struct connecdata would make
  us crash later.

Daniel Stenberg (11 Nov 2010)
- HTTP Auth: Add CURLAUTH_ONLY
  
  This is a meta symbol. OR this value together with a single specific
  auth value to force libcurl to probe for un-restricted auth and if not,
  only that single auth algorithm is acceptable.
  
  For example you can use CURLAUTH_DIGEST|CURLAUTH_ONLY to make libcurl
  first probe for what method to use, but yet only consider Digest to be
  acceptable.
  
  Using _only_ CURLAUTH_DIGEST without the CURLAUTH_ONLY field, will make
  libcurl explicitly use Digest right away and not do any probing.

- ip_version: moved to connection struct
  
  The IP version choice was previously only in the UserDefined struct
  within the SessionHandle, but since we sometimes alter that option
  during a request we need to have it on a per-connection basis.
  
  I also moved more "init conn" code into the allocate_conn() function
  which is designed for that purpose more or less.

Yang Tse (11 Nov 2010)
- buildconf: MAC OS X requires libtool version 1.5.26 or newer
  
  MAC OS X requires libtool version 1.5.26 or newer, otherwise
  configure will mishandle *.dSYM directories when it runs.

- configure: remove temporary autobuilds exercising of xattr function tests

- configure: use autobuilds to temporarily exercise xattr function tests

- xattr: portability fix

- curl-functions: provide xattr function tests that also check number of arguments

Daniel Stenberg (10 Nov 2010)
- test1120: verify FTP response 421
  
  curl mustn't try to use the control connection after the 421 is received

- ftpserver.pl: spellfix comment

- [Rutger Hofman brought this change]

  TFTP: resend the correct data
  
  I found a bug in tftp_tx() in tftp.c. If a data resend is done after
  reception of an ACK/OACK, the call to sendto is wrong.

- [Stefan Tomanek brought this change]

  write extended attributes by using fsetxattr
  
  Instead of reopening the downloaded file, fsetxattr uses the (already
  open) file descriptor to attach extended attributes. This makes the
  procedure more robust against errors caused by moved or deleted files.

Dan Fandrich (9 Nov 2010)
- Check for getinfo errors before setting attributes

Kamil Dudka (9 Nov 2010)
- ftp: treat server's response 421 as CURLE_OPERATION_TIMEDOUT
  
  Bug: https://bugzilla.redhat.com/650255
  Reported by: Simon H.

Daniel Stenberg (9 Nov 2010)
- symbols-in-version: add CURL_SOCKET_BAD
  
  I also documented the filtering logic in the symbol-scan.pl function to
  clarify why not all CURL_* symbols are included.

Yang Tse (9 Nov 2010)
- serial number bump

Kamil Dudka (8 Nov 2010)
- ftp: close connection as soon as ABOR has been sent
  
  ... and do not send ABOR unless really necessary.
  
  Bug: https://bugzilla.redhat.com/649347
  Reported by: Simon H.

Daniel Stenberg (8 Nov 2010)
- RELEASE-NOTES: synced with fc6c4c10f9faab08
  
  I also recounted and updated the command line and libcurl options.

- help: indent the --xattr option like the others

- curl.1: --resolve documented

- CURLOPT_RESOLVE: documented

- CURLOPT_USE_SSL: move from FTP options to connection options

- xattr-check: correct the comment as well

- xattr: use const char * for const strings

- setxattr: fix the checks
  
  My copy and paste job was a little too much copy and I missed to adjust
  it properly to sys/xattr.h all over and this is a fix to cure that.

- CURLOPT_RESOLVE: added
  
  CURLOPT_RESOLVE is a new option that sends along a curl_slist with
  name:port:address sets that will populate the DNS cache with entries so
  that request can be "fooled" to use another host than what otherwise
  would've been used. Previously we've encouraged the use of Host: for
  that when dealing with HTTP, but this new feature has the added bonus
  that it allows the name from the URL to be used for TLS SNI and server
  certificate name checks as well.
  
  This is a first change. Surely more will follow to make it decent.

Yang Tse (8 Nov 2010)
- fix compiler warning

Dan Fandrich (7 Nov 2010)
- Added os-specific.c and xattr.c to the Symbian build files

Yang Tse (7 Nov 2010)
- xattr: fix VisualStudio builds

- fix snapshot generation

Daniel Stenberg (5 Nov 2010)
- --libcurl: simplify output
  
  Removed the code that was needed for libcurl before 7.19.0 which now is
  more than two years old.
  
  Simplified the top comment and corrected the URL.

- [Alfred Gebert brought this change]

  LDAP: detect non-binary attributes properly
  
  If the query result has a binary attribute, the binary attribute is
  base64 encoded. But all following non binary attributes are also base64
  encoded which is wrong.
  
  This is a test (LDAP server is public).
  
  curl
  ldap://x500.bund.de:389/o=Bund,c=DE?userCertificate,certificateSerialNumber?sub
  ?cn=*Woehleke*

- xattr: add configure check and #ifdefs
  
  setxattr is a glibc call to set extended attributes, so configure now
  checks for it and the code is adapted to only build when the
  functionality is present.

- [Stefan Tomanek brought this change]

  save metadata to extended file attributes
  
  It is often convinient to track back the source of a once downloaded
  file; this patch makes curl store the source URL and other metadata
  alongside the retrieved file by using the extended attributes (if
  supported by the file system and enabled by --xattr).

- test: remove test 580
  
  Test 580 is removed again for two reasons:
  
  1) Some compilers aren't satisfied by just a data variable called 'test'
  when first.o wants a function called 'test'. The Solaris compiler says
  "ld: warning: symbol `test' has differing types:" while the AIX compiler
  downright rejects it.
  
  2) Test case 1119 that was added after this test is way more complete
  and cover everything test 580 does and more without introducing the same
  problems.

- Revert: use Host: name for SNI and cert name checks
  
  This reverts commit b0fd03f5b8d4520dd232a9d13567d16bd0ad8951,
  4b2fbe1e97891f, afecd1aa13b4f, 68cde058f66b3

- TODO-RELEASE: "TLS SNI use Host:" is done
  
  262 - Manual setting of TLS Server Name Indication - use Host:

- RELEASE-NOTES: synced with 7b823badbcab9d330

- curl.1: added a few missing exit codes

- certcheck: use the custom Host: name for checks
  
  If you use a custom Host: name in a request to a SSL server, libcurl
  will now use that given name when it verifies the server certificate to
  be correct rather than using the host name used in the actual URL.

- SNI: simplify the custom host name use
  
  The redirect check is already done at the position where the customhost
  field is assigned so there's no point in doing that a second time.

- host: get the custom Host: name more genericly
  
  When given a custom host name in a Host: header, we can use it for
  several different purposes other than just cookies, so we rename it and
  use it for SSL SNI etc.

- [Hongli Lai (Phusion) brought this change]

  SNI: set name to custom Host header
  
  OpenSSL SNI host name should be set to the custom Host header, if the
  user provided one.

- fopen.c: re-indented, fixed previous mistake
  
  I've made the code intended using curl-style now to look more like other
  examples.
  
  My previous "fix" was a bit too invasive but is now fixed again.

- multi use: call multi_perform even on select() timeouts

- example: add smtp-multi.c
  
  An example application source code sending SMTP mail with the multi
  interface. It is based on the code Alona Rossen provided, which in turn
  is based on existing example/test code, and I converted it even more
  into a decent example with a fair multi API use, put the info required
  to edit at the top and I added some comments.

- CURLOPT_NOSIGNAL: add blurb about SIGPIPE

Dan Fandrich (3 Nov 2010)
- Allow building test 580 out of tree

Daniel Stenberg (3 Nov 2010)
- dist: add symbol-scan.pl to the tarball

- test1119: verify symbols-in-versions

- runtests: allow tests written as perl scripts
  
  If a command is set type="perl", it can now specify a perl program that will
  be run instead of an ordinary curl or built tool.
  
  A perl test automatically disables memory and valgrind debugging.

- symbol-scan: verifies symbols-in-versions
  
  This new script scans for all enums and #defines used by the curl/curl.h
  and curl/multi.h headers. Then it reads all symbols mentioned in
  symbols-in-vesions and make sure that there's no entries missing in
  there. It then proceeds to verify that the entries that
  symbols-in-vesions mentions but aren't found in the sources are truly
  documented as removed.
  
  This script is used in the new test case 1119

- symbols-in-versions: added 119 missing symbols
  
  I've developed a script I call symbol-scan.pl that scans the curl.h and
  multi.h header files and compare the symbols it finds in there with the
  symbols symbols-in-versions documents and outputs a report on the
  differences.  Using this I've dug through the history to fill up
  symbols-in-versions with all the symbols my script found mismatches for.
  
  I will commit symbol-scan.pl separatly and think of a way to put it to
  use in the build/tests so that we from now on will get this in-sync
  check automatically.

Dan Fandrich (2 Nov 2010)
- Added mk580.pl to the tar ball

Daniel Stenberg (2 Nov 2010)
- symbols-in-versions: added missing symbols

- ignore: lib580.c is generated by mk580.pl

- test: added test 580 - verifies symbols-in-versions
  
  The new perl script mk580.pl generates a C table in a fresh source file
  named lib580.c and if that compiles fine we know that the file
  docs/libcurl/symbols-in-versions at least doesn't include any symbols
  that are misspelled.
  
  An additional feature would be to somehow scan curl/curl.h and compare
  with symbols-in-versions to see if there are symbols missing.

- spellfix: CURLOPT_TFTP_BLKSIZE it is

Kamil Dudka (29 Oct 2010)
- ftp: prevent server from hanging on closed data connection
  
  Some FTP servers (e.g. Pure-ftpd) end up hanging if we close the data
  connection before transferring all the requested data.  If we send ABOR
  in that case, it prevents the server from hanging.
  
  Bug: https://bugzilla.redhat.com/643656
  Reported by: Pasi Karkkainen, Patrick Monnerat

Dan Fandrich (28 Oct 2010)
- Removed a leftover mention of FTP in an error message

- Removed the native Makefile.riscos files
  
  These haven't worked in at least 8 years due to missing source
  files, and most active RiscOS developers these days apparently
  cross-compile anyway.
  
  Signed-off-by: James Bursa <james@zamez.org>

- Lightened the stack in wc_statemach to permit deeper recursion
  
  Also, added a few hints to help compilers to perform tail call
  recursion optimization.

Daniel Stenberg (20 Oct 2010)
- SSH: use libssh2_session_handshake()
  
  In libssh2 1.2.8, libssh2_session_handshake() replaces
  libssh2_session_startup() to fix the previous portability problem with
  the socket type that was too small for win64 and thus easily could cause
  crashes and more.

- SSH: avoid using the libssh2_ prefix
  
  It is a bad idea to use the public prefix used by another library and
  now we realize that libssh2 introduces a symbol in the upcoming version
  1.2.8 that conflicts with our static function named libssh2_free.

- formdata: provide error message
  
  When failing to build form post due to an error, the code now does a
  proper failf(). Previously libcurl would report an error like "failed
  creating formpost data" when a file wasn't possible to open which was
  not easy for users to figure out.
  
  I also lower cased a function name to be named more curl-style and
  removed some unnecessary code.

- URL-parsing: consider ? a divider
  
  The URL parser got a little stricter as it now considers a ? to be a
  host name divider so that the slightly sloppier URLs work too. The
  problem that made me do this change was the reported problem with an URL
  like: www.example.com?email=name@example.com This form of URL is not
  really a legal URL (due to the missing slash after the host name) but is
  widely accepted by all major browsers and libcurl also already accepted
  it, it was just the '@' letter that triggered the problem now.
  
  The side-effect of this change is that now libcurl no longer accepts the
  ?  letter as part of user-name or password when given in the URL, which
  it used to accept (and is tested in test 191). That letter is however
  mentioned in RFC3986 to be required to be percent encoded since it is
  used as a divider.
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3090268

- curl_easy_setopt.3: spellfix

- curl_easy_setopt.3: CURLOPT_USE_SSL is not just for FTP
  
  It is for FTP, SMTP, POP3, IMAP at least.

- krb4.h: removed unused prototypes

- krb4: make a few functions static

- TODO-RELEASE: cleanup for 7.21.3 works
  
  "SFTP resume with 4GB file does not work" is now removed as I'm sure
  this is really a libssh2 bug and not a libcurl bug.
  
  7.21.2 is released already

- RELEASE-NOTES: sync with 09a2d93a0f17ca

- http_chunks: remove debug output
  
  Accidentally left in there during my previous debugging of this

- Curl_setopt: disallow CURLOPT_USE_SSL without SSL support
  
  In order to avoid for example the pingpong protocols to issue STARTTLS
  (or equivalent) even though there's no SSL support built-in.
  
  Reported by: Sune Ahlgren
  Bug: http://curl.haxx.se/mail/archive-2010-10/0045.html

- options: check for features for some options
  
  Some options, such as the automatic decompression and some SSL related
  ones now will bail out if the underlying libcurl doesn't have support
  for the particular feature needed.

Dan Fandrich (14 Oct 2010)
- Fixed the IPv6 host address in test1203
  
  Reported by: Christian Weisgerber
  Bug: http://curl.haxx.se/bug/view.cgi?id=3087479

Daniel Stenberg (14 Oct 2010)
- curl_easy_setopt.3: clarify CURLOPT_CRLF
  
  The option takes a parameter that should be 1 or 0 to enable or disable
  the feature.
  
  URL: http://curl.haxx.se/bug/view.cgi?id=3086428

Guenter Knauf (14 Oct 2010)
- Some more small Watcom makefile fixes.

- Added --noconfigure switch to testcurl.pl.

- Modified Watcom makefiles to work on Linux too.

- Added MingW32 rtmp target; changed Watcom targets.
  
  Modified Watcom targets to avoid backslashs so that they can
  work on Linux too.

Daniel Stenberg (13 Oct 2010)
- gitignore: ignore Makefile.vc10.dist made by maketgz

- curlver.h: start over at 7.21.3

- RELEASE-NOTES: start over towards 7.21.3

- THANKS: added contributors from 7.21.2

Version 7.21.2 (12 Oct 2010)

Daniel Stenberg (12 Oct 2010)
- RELEASE-NOTES: synced with ecd624b8e774a85

- [Julien Chaffraix brought this change]

  CMake: Build fix.
  
  Do not match the trailing '\n' in the regular expression as this would
  make us dump a ) parenthesis on a new line.
  
  This fixes the following error:
  
  would get transformed into:
  
  )
  
  Bug: http://curl.haxx.se/mail/lib-2010-10/0065.html
  Reported by: Dimitre Dimitrov

- header_callback: strip off file path separated with backslashes
  
  If the filename contains a backslash, only use filename portion. The
  idea is that even systems that don't handle backslashes as path
  separators probably want that path removed for convenience.
  
  This flaw is considered a security problem, see the curl security
  vulnerability http://curl.haxx.se/docs/adv_20101013.html

Dan Fandrich (12 Oct 2010)
- Get the curl source files for Amiga from Makefile.inc
  
  This is similar to how it's done in the lib directory.
  The Amiga build appears to have been broken for a year because
  of a missing homedir.c

- Added section on server-supplied names to security considerations

Guenter Knauf (12 Oct 2010)
- Fixed Watcom makefile.

- Added build bits for librtmp / libssh2 to Watcom makefiles.

- Added build bits for librtmp to NetWare makefiles.

Daniel Stenberg (12 Oct 2010)
- SFTP: more ignoring negative file sizes
  
  As the change in 5f0ae7a0626cbe709 added a precaution against negative
  file sizes that for some reason managed to get returned, this change now
  introduces the same check at the second place in the code where the file
  size from the libssh2 stat call is used.
  
  This check might not be suitable for a 32 bit curl_off_t, but libssh2.h
  assumes long long to work and to be 64 bit so I believe such a small
  curl_off_t will be very unlikely to occur in the wild.

- SMTP: debug output for no known auth mechanisms supported
  
  ... and some minor source code whitespace edits

- test: urlglob error messages have no extra newline anymore

Guenter Knauf (11 Oct 2010)
- Added build bits for librtmp to MingW32 makefiles.

Daniel Stenberg (8 Oct 2010)
- RELEASE-NOTES: synced with 61f4cdb73ae4

- globbing: fix crash on unballanced open brace
  
  Having an open brace without a closing brace caused a segfault.
  
  Having a closing brace too many caused a silent error to occur, which
  caused curl to bail out and return an error code but no error message
  was shown. It does now!
  
  All error message outputs no longer wrongly get _two_ newlines written
  after the error message.
  
  Reported by: Vlad Ureche
  Bug: http://curl.haxx.se/bug/view.cgi?id=3083942

- [Dan Locks brought this change]

  libcurl.m4: AC_PATH_PROG fixes
  
  The invocation of autoconf's AC_PATH_PROG( ) is not quite right for
  finding curl-config. This fix corrects the negative case (where
  curl-config is not found).

- FAQ: added "How do I submit my patch?"

- examples: use example.com in example URLs

- TODO-RELEASE: libidn problem not repeatable
  
  "261 - configure and libidn" is removed from the list since Julien
  Chaffraix tried to repeat it but failed and the reporter did not return
  to provide further details.
  
  Reported by: Lyndon Hill
  Bug: http://curl.haxx.se/mail/lib-2010-07/0029.html

- libcurl.m4: mention argument is PREFIX
  
  The macro provides a --with-libcurl option that expects a PREFIX to be
  specified and not actually a "directory" in which libcurl will be found.
  This now spells that out more clearly.
  
  Reported by: Dan Locks
  Bug: http://curl.haxx.se/bug/view.cgi?id=3079891

Guenter Knauf (3 Oct 2010)
- Some NetWare makefile tweaks.
  
  Renamed SDK_* to NDK_*; made NDK_* defines overwriteable from
  environment; removed now obsolete YACC macro;
  moved some curl_config.h defines to IPv6 section since they
  are only needed when IPv6 is enabled - this makes libcurl compile
  with older NDKs too which were not IPv6-aware.

Daniel Stenberg (2 Oct 2010)
- TODO-RELEASE: 416 error fixed
  
  "3076808 Requests fail silently following a 416 error" done

Julien Chaffraix (2 Oct 2010)
- krb5-gssapi: Removed a memory leak in krb5_auth.
  
  We forgot to release the buffer passed to gss_init_sec_context.
  
  The previous logic was difficult to read as we were reusing the same
  variable (gssbuf) for both input buffer and output buffer. Splitted the
  logic in 2 variables to better underline who needs to be released.
  Also made the code break at 80 lines.

- krb5-gssapi: Made the function always return a value.
  
  kr5_auth missed a final 'return' statement. This is not an error in
  gcc but can lead to potential bugs.

- krb5-gssapi: Delete the GSS-API context.
  
  This fixes a memory leak related to the GSS-API code.
  
  Added a krb5_init and krb5_end functions. Also removed a work-around
  the lack of proper initialization of the GSS-API context.

Daniel Stenberg (2 Oct 2010)
- HTTP: remove special case for 416
  
  It was pointed out that the special case libcurl did for 416 was
  incorrect and wrong. 416 is not really different to other errors so the
  response body must be handled like for other errors/http responses.
  
  Reported by: Chris Smowton
  Bug: http://curl.haxx.se/bug/view.cgi?id=3076808

- [Dan Fandrich brought this change]

  sws: Added writedelay HTTP server command
  
  This delays between write operations, hopefully making it easier
  to spot problems where libcurl doesn't flush the socket properly
  before waiting for the next response.

- TODO-RELEASE: no bug in ftp_nextconnect
  
  The issue named "266 - Bug in ftp_nextconnect?" was deemed to not be a
  bug and instead resulted in clarified docs.

- curl_easy_setopt.3: CURLOPT_DIRLISTONLY implies dir list
  
  Make it explicit that setting CURLOPT_DIRLISTONLY to 1 will make libcurl
  to list the directory.

- RELEASE-NOTES: synced up to 588402585bae

- TODO-RELEASE: move new features to next release

- README.ares: we know require c-ares 1.6.0

- SFTP: avoid downloading negative sizes!
  
  It is still not clarified exactly why this happens, but libssh2
  sometimes report a negative file size for the remote SFTP file and that
  deeply confuses libcurl (or crashes it) so this precaution is added to
  avoid badness.
  
  Reported by: Ernest Beinrohr
  Bug: http://curl.haxx.se/bug/view.cgi?id=3076430

- TODO-RELEASE: drop curl_easy_setoptv
  
  I haven't read any really convincing arguments for adding it

- [Dirk Manske brought this change]

  multi & hiper examples: updates and cleanups
  
  all multi and hiper examples:
  
  * don't loop curl_multi_perform calls, that was <7.20.0 style, currently
    the exported multi functions will not return CURLM_CALL_MULTI_PERFORM
  
  all hiper examples:
  * renamed check_run_count to check_multi_info
  * don't  compare current running handle count with previous value, this
    was the wrong way to check for finished requests, simply call
    curl_multi_info_read
  * it's also safe to call curl_multi_remove_handle inside the
    curl_multi_info_read loop.
  
  ghiper.c:
  * replaced curl_multi_socket (that function is marked as obsolete) calls
    with curl_multi_socket_action calls (as in hiperfifo.c and
    evhiperfifo.c)
  
  ghiper.c and evhiperfifo.c:
  * be smart as hiperfifo.c, don't do uncessary curl_multi_* calls in
    new_conn and main

- TODO-RELEASE: one fixed, one postponed, one added
  
  As we're already in feature freeze, I pushed the feature onwards.

Dan Fandrich (29 Sep 2010)
- Renamed test1204 to test1117 to move it into the normal range

Patrick Monnerat (29 Sep 2010)
- Add gopher protocol definition to ILE/RPG binding.
  OS400 compile script in test dir updated for chkhostname.

Julien Chaffraix (28 Sep 2010)
- krb5-gssapi: Remove several memory leaks.
  
  Remove a leak seen on Kerberos/MIT (gss_OID is copied internally and
  we were leaking it). Now we just pass NULL as advised in RFC2744.
  
  |tmp| was never set back to buf->data.
  
  Cleaned up Curl_sec_end to take into account failure in Curl_sec_login
  (where conn->mech would be NULL but not conn->app_data or
  conn->in_buffer->data).

- security.c: Remove Curl_sec_fflush_fd.
  
  The current implementation would make us send wrong data on a closed
  socket. We don't buffer our data so the method can be safely removed.

- security.c: We should always register the socket handler.
  
  Following a change in the way socket handler are registered, the custom
  recv and send method were conditionaly registered.
  We need to register them everytime to handle the ftp security
  extensions.
  
  Re-added the clear text handling in sec_recv.

- security.c: Fix Curl_sec_login after rewrite.
  
  Curl_sec_login was returning the opposite result that the code in ftp.c
  was expecting. Simplified the return code (using a CURLcode) so to see
  more clearly what is going on.

- security.c: Readd the '\n' to the infof() calls.
  
  They are not automatically added and make the output of the verbose
  mode a lot more readable.

- security.c: Fix typo (PSBZ -> PBSZ)

- security.c: Fix ftp_send_command.
  
  My use of va_args was completely wrong. Fixed the usage so that
  we send the right commands!

Daniel Stenberg (28 Sep 2010)
- curl_easy_escape: don't escape "unreserved" characters
  
  According to RFC3986 section 2.3 the letters -, ., _ and ~ should not be
  percent-encoded.
  
  Reported by: Miguel Diaz
  Bug: http://curl.haxx.se/mail/lib-2010-09/0227.html

- multi: don't expire timeouts at disonnect or done
  
  The functions Curl_disconnect() and Curl_done() are both used within the
  scope of a single request so they cannot be allowed to use
  Curl_expire(... 0) to kill all timeouts as there are some timeouts that
  are set before a request that are supposed to remain until the request
  is done.
  
  The timeouts are now instead cleared at curl_easy_cleanup() and when the
  multi state machine changes a handle to the complete state.

Dan Fandrich (27 Sep 2010)
- Changed the TPF make file to get source files from Makefile.inc
  
  Patch was fixed and validated by David McCreedy.

- Added test case 1204 to test HTTP range failure
  
  This is an attempt to reproduce bug #3076808

Daniel Stenberg (27 Sep 2010)
- [Dirk Manske brought this change]

  multi_runsingle: set timeout error messages
  
  With the latest changes to fix the timeout handling with multi interface
  we lost the timeout error messages. This patch brings them back.

- TODO-RELEASE: updated list of issues to work on

- parsedate: allow time specified without seconds
  
  The date format in RFC822 allows that the seconds part of HH:MM:SS is
  left out, but this function didn't allow it. This change also includes a
  modified test case that makes sure that this now works.
  
  Reported by: Matt Ford
  Bug: http://curl.haxx.se/bug/view.cgi?id=3076529

- TFTP: re-indented the source code
  
  Just made sure that the good old curl indentation style is used all over
  this file.

- [Tim Newsome brought this change]

  TFTP: Work around tftpd-hpa upload bug
  
  tftpd-hpa has a bug where it will send an incorrect ack when the block
  counter wraps and tftp options have been sent. Work around that by
  accepting an ack for 65535 when we're expecting one for 0.

- Revert "security.c: buffer_read various fixes."
  
  This reverts commit fbb38de415b7bb7d743e53a7b4b887ffb12b3e5b.

- security.c: removed superfluous parentheses
  
  And also removed the FIXME where memory was zeroed just before freed,
  and some other minor whitespace changes.

- [Julien Chaffraix brought this change]

  security.c: Update the #include statements after the rewrite.

- [Julien Chaffraix brought this change]

  security.c: sec_write tweaks
  
  - |fd| is now a curl_socket_t and |len| a size_t to avoid conversions.
  - Added 2 FIXMEs about the 2 unsigned -> signed conversions.
  - Included 2 minor changes to Curl_sec_end.

- [Julien Chaffraix brought this change]

  security.c: _sec_send tweaks
  
  - Renamed the method to sec_send now that we
    renamed sec_send to do_sec_send.
  - Some more variable renaming.

- [Julien Chaffraix brought this change]

  security.c: sec_read tweaks
  
  - Renamed the function to sec_recv.
  - Renamed the parameters and variable to match the rest of the code.

- [Julien Chaffraix brought this change]

  security.c: Curl_sec_fflush_fd tweaks
  
  - Use an early return as it makes the code more readable.
  - Added a FIXME about a conversion.

- [Julien Chaffraix brought this change]

  security.c: sec_send tweaks
  
  - Renamed it to do_sec_send as it is the function doing the actual
    transfer.
  - Do not return any values as no one was checking it and it never
    reported a failure (added a FIXME about checking for errors).
  - Renamed the variables to make their use more specific.
  - Removed some casts (int -> curl_socket_t, ...)
  - Avoid doing the htnl <-> nthl twice by caching the 2 results.

- [Julien Chaffraix brought this change]

  security.c: Curl_sec_read_msg tweaks
  
  - Renamed the variables name to better match their intend.
  - Unified the |decoded_len| checks.
  - Added some FIXMEs to flag some improvement that did not go in this
    change.

- [Julien Chaffraix brought this change]

  security.c: Curl_sec_set_protection_level tweaking
  
  - Removed sec_prot_internal as it is now inlined in the function (this removed
    a redundant check).
  - Changed the prototype to return an error code.
  - Updated the method to use the new ftp_send_command function.
  - Added a level_to_char helper method to avoid relying on the compiler's
    bound checks. This default to the maximum security we have in case of a
    wrong input.

- [Julien Chaffraix brought this change]

  security.c: factored the logic from Curl_sec_login into a dedicated method that better reflect its intent.
  
  Introduced a helper method ftp_send_command that synchronously send
  an FTP query.

- [Julien Chaffraix brought this change]

  security.c: Remove out_buffer as it was never written into.

- [Julien Chaffraix brought this change]

  security.c: buffer_read various fixes.
  
  Tighten the type of the |data| parameter to avoid a cast. Also made
  it const as we should not modify it.
  
  Added a DEBUGASSERT on the size to be written while changing it.

- [Julien Chaffraix brought this change]

  security.c: Made block_write return a CURLcode.
  
  While doing so, renamed it to socket_write to better match its
  function.

- [Julien Chaffraix brought this change]

  security.c: Made block_read and sec_get_data return CURLcode.
  
  To do so, made block_read call Curl_read_plain instead of read.
  
  While changing them renamed block_read to socket_read and sec_get_data
  to read_data to better match their function.
  
  Also fixed a potential memory leak in block_read.

- [Julien Chaffraix brought this change]

  Security.c: Fix headers guard to match the rest of the code.

- [Julien Chaffraix brought this change]

  configure: Fix the LDAPS disable message
  
  ... for example when LDAP is not compiled.
  
  Fixed the logic to match the rest of the options' message that is we
  update the default message only if the option is not disabled after the
  different checks.
  
  Reported by: Guenter Knauf

- RELEASE-NOTES: sync with 8665d4e5 and c-ares >= 1.6.0 note

- parse_remote_port: ignore colons without port number
  
  Obviously, browsers ignore a colon without a following port number. Both
  Firefox and Chrome just removes the colon for such URLs. This change
  does not remove the colon for URLs sent over a HTTP proxy, so we should
  consider doing that change as well.
  
  Reported by: github user 'kreshano'

- RELEASE-NOTES: in sync with 19f45eaa799

- duphandle: use ares_dup()
  
  curl_easy_duphandle() was not properly duping the ares channel. The
  ares_dup() function was introduced in c-ares 1.6.0 so by starting to use
  this function we also raise the bar and require c-ares >= 1.6.0
  (released Dec 9, 2008) for such builds.
  
  Reported by: Ning Dong
  Bug: http://curl.haxx.se/mail/lib-2010-08/0318.html

- [Hendrik Visage brought this change]

  MacOSX-Framework: updates for Snowleopard
  
  1) PPC64 appears to be an 10.5 only supported architecture, so I
  forced 10.5 for 64bit if there is a need for PPC64, else 64bit only
  does x86_64
  
  2) proper "make clean" after every ./configure. fixes a bug where
  subsequent runs the 32bit do not get compiled
  
  3) Added a version numbering curl-$VERSION} rather than the "stock standard" A

- RELEASE-NOTES: synced with 5fcc4332d62fe
  
  Removed the duplicate entry of Kamil in the credits.

- configure: don't enable RTMP if the lib detect fails
  
  librtmp is often statically linked and using sub dependencies like
  OpenSSL, so we need to make sure we can actually link with it properly
  before enabling it. Otherwise we easily end up trying to link with a
  RTMP lib that fails.

- TODO: added 8.4 non-gcrypt under GnuTLS
  
  We must not assume gcrypt just because of GnuTLS

- configure: check for gcrypt if using GnuTLS
  
  1 - libcurl assumes that there are gcrypt functions available when
  GnuTLS is.
  
  2 - GnuTLS can be built to use libnettle instead as crypto library,
  which breaks assumption (1)
  
  This change makes configure make sure that if GnuTLS is requested and
  detected, it also makes sure that gcrypt is present or it errors
  out. This is mostly a way to make the user more aware of this flaw, the
  correct fix would be to detect which crypto layer that is in use and
  adapt our code to use that instead of blindly assuming gcrypt.
  
  Reported by: Michal Gorny
  Bug: http://curl.haxx.se/bug/view.cgi?id=3071038

- RELEASE-NOTES: sync from d2a7fd2fe65b to HEAD

- FTP: fix bad check of Curl_timeleft() return code
  
  When it returns 0 it means no timeout. Only a negative value means that
  we're out of time.

- LDAP: moved variable declaration to avoid compiler warn
  
  If built without HTTP or proxy support it would cause a compiler warning
  due to the unused variable. I moved the declaration of it into the only
  scope it is used.

Tor Arntsen (18 Sep 2010)
- LDAP: Use FALSE instead of bool_false when setting bits.close
  
  bool_false is the internal name used in the setup_once.h definition
  we fall back to for non-C99 non-stdbool systems, it's not the actual
  name to use in assignments (we use bool_false, bool_true there to
  avoid global namespace problems, see comment in setup_once.h).
  The correct C99 value to use is 'false', but let's use FALSE as
  used elsewhere when assigning to bits.close. FALSE is set equal
  to 'false' in setup_once.h when possible.
  
  This fixes a build problem on C99 targets.

- LDAP: Add missing declaration for 'result'

Daniel Stenberg (18 Sep 2010)
- [Mauro Iorio brought this change]

  LDAP: Support for tunnelling queries through HTTP proxy
  
  As of curl-7.21.1 tunnelling ldap queries through HTTP Proxies is not
  supported. Actually if --proxytunnel command-line option (or equivalent
  CURLOPT_HTTPPROXYTUNNEL) is used for ldap queries like
  ldap://ldap.my.server.com/... You are unable to successfully execute the
  query. In facts ldap_*_bind is executed directly against the ldap server
  and proxy is totally ignored. This is true for both openLDAP and
  Microsoft LDAP API.
  
  Step to reproduce the error:
  Just launch "curl --proxytunnel --proxy 192.168.1.1:8080
  ldap://ldap.my.server.com/dc=... "
  
  This fix adds an invocation to Curl_proxyCONNECT against the provided
  proxy address and on successful "CONNECT" it tunnels ldap query to the
  final ldap server through the HTTP proxy. As far as I know Microsoft
  LDAP APIs don't permit tunnelling in any way so the patch provided is
  for OpenLDAP only.  The patch has been developed against OpenLDAP 2.4.23
  and has been tested with Microsoft ISA Server 2006 and works properly
  with basic, digest and NTLM authentication.

- timeout: use the correct start value as offset
  
  Rodric provide an awesome recipe that proved libcurl didn't timeout at
  the requested time - it instead often timed out at [connect time] +
  [timeout time] instead of the documented and intended [timeout time]
  only. This bug was due to the code using the wrong base offset when
  comparing against "now". I could also take the oppurtinity to simplify
  the code by properly using of the generic help function for this:
  Curl_timeleft.
  
  Reported by: Rodric Glaser
  Bug: http://curl.haxx.se/bug/view.cgi?id=3061535

- Curl_timeleft: avoid returning "no timeout" by mistake
  
  As this function uses return code 0 to mean that there is no timeout, it
  needs to check that it doesn't return a time left value that is exactly
  zero. It could lead to libcurl doing an extra 1000 ms select() call and
  thus not timing out as accurately as it should.
  
  I fell over this bug when working on the bug 3061535 but this fix does
  not correct that problem alone, although this is a problem that needs to
  be fixed.
  
  Reported by: Rodric Glaser
  Bug: http://curl.haxx.se/bug/view.cgi?id=3061535

- whitespace: unified source
  
  if ( => if(
  while ( => while(
  
  and some other changes in the similar spirit, trying to make the
  whole file use the same style

- remote-header-name: don't output filename when NULL

- [James Bursa brought this change]

  TheArtOfHttpScripting: use long options

- [James Bursa brought this change]

  getinmemory: make the example easier to follow
  
  1. Remove the comment warning that it's "not been verified to work". It
     works with no problems in my testing.
  
  2. Remove 2 unnecessary includes.
  
  3. Remove the myrealloc(). Initialize chunk.memory with malloc() instead
     of NULL. The comments for these two parts contradicted each other.
  
  4. Handle out of memory from realloc() instead of continuing.
  
  5. Print a brief status message at the end.

- multi: don't do extra expire calls for the connection
  
  The timeout is set for the connect phase already at the start of the
  request so we should not add a new one, and we MUST not set expire to 0
  as that will remove any other potentially existing timeouts.

- [Peter Pentchev brought this change]

  Fix a bashism: test a = b is more portable than ==.

- glob_word: remove a check that is always false

- inflate_stream: remove redundant check that is always true

- digest: make it clear the condition is always true

- ssluse: removed redundant check that is always true

Dan Fandrich (11 Sep 2010)
- Link curl and the test apps with -lrt explicitly when necessary
  
  When curl calls a function from that library then it needs to
  explicitly link to the library instead of piggybacking on
  libcurl's own dependency.  Without this, GNU ld with the
  --no-add-needed flag fails when linking (which Fedora now does
  by default).
  
  Reported by: Quanah Gibson-Mount
  Bug: http://curl.haxx.se/mail/lib-2010-09/0085.html

- Mention the Debian Popularity Contest

Tor Arntsen (9 Sep 2010)
- test565: Don't hardcode IP:PORT
  
  Use %HOSTIP:%HTTPPORT instead of 127.0.0.1:8990 so that
  verification works if the baseport change option is used
  when executing runtests.pl.

Daniel Stenberg (9 Sep 2010)
- curl.1: updated protocols and polished language

- FAQ: CURL_STATICLIB for visual studio users
  
  Clarified as it isn't used with a -D option for them.
  
  Reported by: Artfunkel
  Bug: http://curl.haxx.se/bug/view.cgi?id=3060381

- FAQ: updated and added host with custom IP question
  
  Added "3.19 How do I get HTTP from a host using a specific IP address?"
  and updated some stuff about certs etc.

- chunky parser: only rewind if needed
  
  The code reading chunked encoding attempts to rewind the code if it had
  read more data than the chunky parser consumes. The rewinding can fail
  and it will then cause an error. This change now makes the rewinding
  only happen if pipelining is in use - as that's the only time it really
  needs to be done.
  
  Bug: http://curl.haxx.se/mail/lib-2010-08/0297.html
  Reported by: Ron Parker

Kamil Dudka (6 Sep 2010)
- rtsp: avoid SIGSEGV on malformed header

- rtsp: avoid SIGSEGV on malformed header

Daniel Stenberg (6 Sep 2010)
- warning: fix conversion to 'int' from 'size_t'

- portabilty: use proper variable type to hold sockets
  
  Curl_getconnectinfo() is changed to return a proper curl_socket_t for
  the last socket so that it'll work more portably (and cause less
  compiler warnings).

Guenter Knauf (3 Sep 2010)
- Trial to fix another compiler warning with braces.

Dan Fandrich (2 Sep 2010)
- Use checkprefix() to compare protocol-specific strings
  
  Otherwise, there could be problems running in certain locales.

Guenter Knauf (2 Sep 2010)
- Moved S_ISREG define to setup as suggested by Dan.

- Use own typedef as workaround for broken sspi.h header (f.e. Watcom).

- Added some hacks in order to build with VC from git.
  
  Adam Light posted this patch to the list which enables builds from
  git with VC versions other than vc6; also he added a vc10 target.

- Added S_ISREG define for Win32.

Daniel Stenberg (1 Sep 2010)
- multi: fixes for timing out handles
  
  Add a timeout check for handles in the state machine so that they will
  timeout in all states disregarding what actions that may or may not
  happen.
  
  Fixed a bug in socket_action introduced recently when looping over timed
  out handles: it wouldn't assign the 'data' variable and thus it wouldn't
  properly take care of handles.
  
  In the update_timer function, the code now checks if the timeout has
  been removed and then it tells the application. Previously it would
  always let the remaining timeout(s) just linger to expire later on.

- threaded resolver: no more expire 0 calls
  
  Curl_expire() set to 0 expires ALL timeouts so it should only be called
  if we truly and really want to remove all timeouts for the handle.

- resolve_server: simplify code
  
  Make use of the helper function Curl_timeleft() instead of duplicating
  code.

- multi: make sure the next timeout is used when one expires
  
  Each easy handle has a list of timeouts, so as soon as the main timeout
  for a handle expires, we must make sure to get the next entry from the
  list and re-add the handle to the splay tree.
  
  This was attempted previously but was done poorly in my commit
  232ad6549a68450.

Dan Fandrich (30 Aug 2010)
- Added proxy keyword to allow skipping test in proxyless configs

Daniel Stenberg (29 Aug 2010)
- multi: set timeouts when transfer begins
  
  When a new transfer is about to start we now set the proper timeouts to
  expire for the multi interface if they are set for the handle. This is a
  follow-up bugfix to make sure that easy handles timeout properly when
  the times expire and the multi interface is used. This also improves
  curl_multi_timeout().

- CURLOPT_DIRLISTONLY: don't use with CURLOPT_WILDCARDMATCH

- FAQ: update list of supported protocols

- [Fabian Keil brought this change]

  In the m4 detection line, factor out the 2>dev/null

- [Fabian Keil brought this change]

  If m4 doesn't support --version, try if gm4 does.

- [Fabian Keil brought this change]

  If the m4 version isn't recognized at all, just say so
  
  'm4 version  found. You need a GNU m4 installed!' is a bit confusing.

- HISTORY: mention the gopher story

Dan Fandrich (25 Aug 2010)
- Tweaked some test data files
  
  Fixed some issues that caused xmllint failures, added features
  and keywords, fixed some quotes and removed some <strip> sections
  that unnecessarily limited test checking.

- Added new source files to Symbian and TPF makefiles

Daniel Stenberg (25 Aug 2010)
- RELEASE-NOTES: sync from b980c9a02 to HEAD

- Makefile: add gopher.c file to build
  
  As the VC and RISCOS makefiles don't use the .inc file

- runtests: fix uninitialized variable warning

- gopher tests: revert parts of gopher in the pingpong server
  
  Introduced in the initial gopher commits, there was added logic to do
  GOPHER test serving in the pingpong server but as it resembles HTTP much
  more than FTP or SMTP, the gopher testing has been moved over to instead
  use the sws (HTTP) server. This change simply removes unused code.

- gopher tests: use sws and adjusted to more standard style

- sws: added basic gopher support

- gopher: enable the header callback/verbosity

- gopher: fix test case line endings
  
  Patches over email very easily lose CRLF line endings in files otherwise
  LF-only so I had to put them back where needed.

- gopher: fix memory leak and busyloop
  
  The fix for the busyloop really only is a temporary work-around.  It
  causes a BLOCKING behavior which is a NO-NO. This function should rather
  be split up in a do and a doing piece where the pieces that aren't
  possible to send now will be sent in the doing function repeatedly until
  the entire request is sent.

- [Cameron Kaiser brought this change]

  Gopher using Curl_write; test suite (4 tests)

- [Cameron Kaiser brought this change]

  Remove url.c test

- [Cameron Kaiser brought this change]

  Forgot gopher.h in Makefile.inc

- [Cameron Kaiser brought this change]

  Gopher protocol support (initial release)

- http: handle trailer headers in all chunked responses
  
  HTTP allows that a server sends trailing headers after all the chunks
  have been sent WITHOUT signalling their presence in the first response
  headers. The "Trailer:" header is only a SHOULD there and as we need to
  handle the situation even without that header I made libcurl ignore
  Trailer: completely.
  
  Test case 1116 was added to verify this and to make sure we handle more
  than one trailer header properly.
  
  Reported by: Patrick McManus
  Bug: http://curl.haxx.se/bug/view.cgi?id=3052450

- TODO: we now support RTMP

- TODO: done "NTLM with other crypto functions"
  
  Since NTLM was made to work with the NSS API as well, the primary SSL
  alternatives will be built with NTLM support in libcurl.

- TODO: fixed "Make curl_multi_info_read faster"
  
  It is really fast now

Dan Fandrich (24 Aug 2010)
- Fixed a NULL pointer dereference in form posting
  
  It was introduced in commit eeb2cb05 along with the -F type=
  change. Also fixed a typo in the name of the magic filename=
  parameter. Tweaked tests 39 and 173 to better test this path.

Daniel Stenberg (24 Aug 2010)
- [Ben Greear brought this change]

  multi:  Fix compile warning on 64-bit systems

Dan Fandrich (23 Aug 2010)
- Mention PolarSSL in tutorial & add some URLs to INSTALL

Daniel Stenberg (23 Aug 2010)
- RESUME_FROM: clarify what ftp uploads do
  
  The numerical value passed to CURLOPT_RESUME_FROM for FTP uploads is
  interpreted and used as position where to resume the _reading_ of the
  local file and it will "blindly" append that data on the remote
  file. This was certainly not clear in the docs previously.
  
  Reported by: catalin
  Bug: http://curl.haxx.se/bug/view.cgi?id=3048174

- [Dirk Manske brought this change]

  Curl_is_connected: use correct errno
  
  The correctly extracted errno contents were mistakenly overwritten by a newer
  value that wasn't the correct error value.
  
  Bug: http://curl.haxx.se/mail/lib-2010-08/0242.html

- cmdline: make -F type= accept ;charset=
  
  The -F option allows some custom parameters within the given string, and
  those strings are separated with semicolons. You can for example specify
  "name=daniel;type=text/plain" to set content-type for the
  field. However, the use of semicolons like that made it not work fine if
  you specified one within the content-type, like for:
  "name=daniel;type=text/plain;charset=UTF-8"
  ... as the second one would be seen as a separator and "charset" is no
  parameter curl knows anything about so it was just silently discarded.
  
  The new logic now checks if the semicolon and following keyword looks
  like a parameter it knows about and if it isn't it is assumed to be
  meant to be used within the content-type string itself.
  
  I modified test case 186 to verify that this works as intended.
  
  Reported by: Larry Stone
  Bug: http://curl.haxx.se/bug/view.cgi?id=3048988

Guenter Knauf (20 Aug 2010)
- Added mk-ca-bundle.vbs script.
  
  The script works exactly same as the Perl one except for one thing:
  when the text descriptions generated with openssl are included then
  the md5 fingerprints are missing; seems openssl has either a bug or
  a feature which prints the md5 fingerprint output to stdout instead
  of writing them to specified file; this script could here do the same
  as what the Perl scripr does (redirect stdout into file) but this
  makes the script take up double the time because it needs to launch
  cmd.exe 140 times (fo each openssl call). So I think for now we just
  ommit the md5 fingerprints, and see if openssl will be fixed.

- Trial to fix win32 autobuilds.
  
  It seems that its time to look at some better ideas for the win32
  non-configure builds; probably a prebuild target which copies
  config-win32.h to curl_config.h and appends also then feature
  defines like USE_ARES.

Dan Fandrich (19 Aug 2010)
- Use the S_ISREG macro to determine what is a regular file

Kamil Dudka (19 Aug 2010)
- AC_INIT: avoid a warning with autoconf 2.66
  
  It was complaining about the '=>' operator, introduced in e3fc0d5.

Dan Fandrich (18 Aug 2010)
- Fixed a memory leak during OOM in the multi timeout code

- Removed a C99ism & made an array const

Daniel Stenberg (19 Aug 2010)
- [Julien Chaffraix brought this change]

  test: added test 579 to verify progress callback for chunked post
  
  The 66 bytes checked are those 38 bytes with the chunked encoding
  headers added: 8+8+10+35+5 = 66
  
  The three-letter words become 8 bytes on the wire because they are sent
  like: "3\r\none\r\n"
  
  ... and there's the trailing 5 bytes write after the four lines since
  the final chunk is sent (which is "0\r\n\r\n").

- multi: avoid sending multiple complete messages
  
  I fell over this bug report that mentioned that libcurl could wrongly
  send more than one complete messages at the end of a transfer. Reading
  the code confirmed this, so I've added a new multi state to make it not
  happen. The mentioned bug report was made by Brad Jorsch but is (oddly
  enough) filed in Debian's bug tracker for the "wmweather+" tool.
  
  Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=593390

- FAQ: update the list of supported protocols

- FAQ: added blurb about ECCN
  
  "1.13 curl's ECCN number" is a new section mostly made up from
  Alessandro Vesely's very informative ML post on the subject:
  http://curl.haxx.se/mail/lib-2008-03/0251.html

Guenter Knauf (18 Aug 2010)
- It is sufficient to pipe stderr to NUL to get rid of the nasty messages.

- Added SSPI build to Watcom makefile.

Daniel Stenberg (16 Aug 2010)
- [Julien Chaffraix brought this change]

  progress: callback for POSTs less than MAX_INITIAL_POST_SIZE
  
  Add a call to Curl_pgrsSetUploadSize in this case valided by a test
  case.
  
  Reported by: 袧懈泻懈褌邪 袛芯褉芯褏懈薪.
  Bug: http://curl.haxx.se/mail/lib-2010-04/0173.html

Dan Fandrich (16 Aug 2010)
- Make the LD_PRELOAD path absolute in the tests that use it
  
  In some situations, libtool will change directories and perform
  a link step before executing the libtest test app. Since
  LD_PRELOAD is in effect for this entire process, the path to the
  binary must be absolute so it will be valid no matter in which
  directory the app is running.

Daniel Stenberg (16 Aug 2010)
- negotiation: Wrong proxy authorization
  
  There's an error in http_negotiation.c where a mistake is using only
  userpwd even for proxy requests. Ludek provided a patch, but I decided
  to write the fix slightly different using his patch as inspiration.
  
  Reported by: Ludek Finstrle
  Bug: http://curl.haxx.se/bug/view.cgi?id=3046066

Dan Fandrich (16 Aug 2010)
- Clear stdout and stderr files on each test run
  
  This allows a test to be run several times in the same test
  session even when the -k option is given.

Guenter Knauf (15 Aug 2010)
- Syncroniszed vclean target; fixed some comments.

Daniel Stenberg (15 Aug 2010)
- THANKS: added contributors from 7.21.1

- multi: two fixes done

- multi: use timeouts properly for MAX_RECV/SEND_SPEED
  
  When detecting that the send or recv speed, the multi interface changes
  state to TOOFAST and previously there was no timeout set that would
  force a recheck but it would rely on the application to somehow call
  libcurl anyway. This now sets a timeout for a suitable future time to
  check again if the average transfer speed is then below the threshold
  again.

- multi: support timeouts
  
  Curl_expire() is now expanded to hold a list of timeouts for each easy
  handle. Only the closest in time will be the one used as the primary
  timeout for the handle and will be used for the splay tree (which sorts
  and lists all handles within the multi handle).
  
  When the main timeout has triggered/expired, the next timeout in time
  that is kept in the list will be moved to the main timeout position and
  used as the key to splay with. This way, all timeouts that are set with
  Curl_expire() internally will end up as a proper timeout. Previously any
  Curl_expire() that set a _later_ timeout than what was already set was
  just silently ignored and thus missed.
  
  Setting Curl_expire() with timeout 0 (zero) will cancel all previously
  added timeouts.
  
  Corrects known bug #62.

- Curl_llist_insert_next: allow insertion first in the list
  
  When we specify the "insert after" entry as NULL, this function now
  inserts the new entry first in the list.

- multi: make curl_multi_info_read perform O(1)
  
  Instead of looping over all attached easy handles, this now keeps a list
  of messages in the multi handle. It allows curl_multi_info_read() to
  perform O(1) no matter how many easy handles that are handled. This is
  of importance since this function may be polled very frequently by apps
  using the multi interface.

Kamil Dudka (15 Aug 2010)
- curl -T: ignore file size of special files
  
  original bug report at https://bugzilla.redhat.com/622520

Dan Fandrich (13 Aug 2010)
- Reset environment variables before starting servers
  
  Otherwise, variables from tests could affect the servers
  themselves.

Kamil Dudka (12 Aug 2010)
- typecheck-gcc: work around gcc upstream bug #32061
  
  original bug report at https://bugzilla.redhat.com/617757

Daniel Stenberg (11 Aug 2010)
- release cycle loop: start over toward 7.21.2

Version 7.21.1 (11 Aug 2010)

Daniel Stenberg (11 Aug 2010)
- RELEASE-NOTES: mention the runtests fix as well

- runtests: clear old setenv remainders before test
  
  Due to the layout of the singletest function there are situations where
  it returns before it clears the environment variables that were
  especially set for the single specific test case. That could lead to
  subsequent tests getting executed with environment variables sticking
  around from a previous test which could lead to badness.
  
  This change makes sure to clear all custom variables that may be laying
  around from a previous round, before running a test case.
  
  Reported by: Kamil Dudka
  Bug: http://curl.haxx.se/mail/lib-2010-08/0141.html

Guenter Knauf (11 Aug 2010)
- Added OpenSSL builds to Watcom makefiles.

Yang Tse (11 Aug 2010)
- configure: werror related adjustments

Daniel Stenberg (11 Aug 2010)
- FAQ: s/libcurl.so.3/libcurl.so.X

Dan Fandrich (10 Aug 2010)
- KNOWN_BUG #59 is fixed. Clarify support of IPv6 zone IDs.

- Fixed typo in Android configure command

Daniel Stenberg (11 Aug 2010)
- HISTORY: added stuff from recent years

- warning: silence the compiler
  
  warning: conversion to 'long int' from 'time_t' may alter its value
  
  ... on win64 when time_t is 64bit and long is 32bit.

- RELEASE-NOTES: synced, 3 additional bugfixes

- multi_socket_action: clarify how to kickstart it
  
  The callbacks are called when curl_multi_socket_action() is called, not
  when handles are added. This is now mentioned in the "TYPICAL USAGE"
  section.

- callbacks: acknowledge progress callback error returns
  
  When the progress callback is called during the TCP connection, an error
  return would accidentally not abort the operation as intended but would
  instead be counted as a failure to connect to that particular IP and
  libcurl would just continue to try the next. I made singleipconnect()
  and trynextip() return CURLcode properly.
  
  Added bonus: it corrected the error code for bad --interface usages,
  like tested in test 1084 and test 1085.
  
  Reported by: Adam Light
  Bug: http://curl.haxx.se/mail/lib-2010-08/0105.html

Guenter Knauf (10 Aug 2010)
- More Watcom makefile fixes ...
  
  Final fix (hopefully!) for dll wlink loader;
  prefer faster internal rm if available.

- Fixed my wrong edit.

- More Watcom makefile fixes.
  
  Added the -br switch to dynamic builds which fixes the issue I saw
  with curl's --version output. Added debug info and symfile for debug
  builds to linker opts. Added DLL loader for wlink back, but this time
  dependend on wlink version.
  Patch posted to the list by malak.jiri AT gmail.com.

- Changed test for -u switch in order to enable other wmake switches.
  
  The var %MAKEFLAGS is only set in 3 cases: if set as environment
  var or as macro definition from commandline, and either with the
  -u or -ms switch. Since all these cases are unlikely for the average
  user it should be safe to only test if %MAKEFLAGS is defined; this
  has the benefit that now all other switches can be used again in
  addition to the -u which was formerly not possible.

Daniel Stenberg (10 Aug 2010)
- llist: hide Curl_llist_init
  
  Curl_llist_init is never used outside of llist.c and thus it should be
  static. I also removed the protos for Curl_llist_insert_prev and
  Curl_llist_remove_next which are functions we removed from llist.c ages
  ago.

Guenter Knauf (10 Aug 2010)
- Added msys Perl since git for Win32 comes with own Perl which identifies as msys.

- Updated lib dependency versions.

- Make testcurl.pl Watcom-aware.

Daniel Stenberg (10 Aug 2010)
- parse_remote_port: fix ;type= URL suffix over HTTP proxy
  
  Test 563 is enabled now and verifies that the combo FTP type=A URL,
  CURLOPT_PORT set and proxy work fine. As a bonus I managed to remove the
  somewhat odd FTP check in parse_remote_port() and instead converted it
  to a better and more generic 'slash_removed' struct field. Checking the
  ->protocol field isn't right since when an FTP:// URL is sent over a
  HTTP proxy, the protocol is HTTP but the URL was handled by the FTP code
  and thus slash_removed is set TRUE for this case.

- indent: white space fixes only

Yang Tse (9 Aug 2010)
- build: fix previous push

- build: don't build libhostname unless shared libcurl is built

- build: libhostname and chkhostname linkage adjustments followup

Daniel Stenberg (8 Aug 2010)
- typo: remove duplicate semicolon

- multi: avoid a malloc() when a transfer is complete
  
  The struct used for storing the message for a completed transfer is now
  no longer allocated separatly but is kept within the main struct kept
  for each easy handle so that we avoid one malloc (and the subsequent
  free).

Yang Tse (8 Aug 2010)
- build: libhostname linkage adjustments followup

Guenter Knauf (7 Aug 2010)
- Fix to overwrite libcurl name.

Yang Tse (7 Aug 2010)
- build: chkhostname build adjustments followup

U-D5B1PQ1J\Administrador (7 Aug 2010)
- build: allow NTLM tests to run on more build configurations

Daniel Stenberg (7 Aug 2010)
- curl_easy_setopt.3: rename stream to userdata
  
  In some places where the name 'stream' has been used for naming a
  function argument that is in fact settable with a setopt() option we now
  call that argument 'userdata' to make it more obvious that it is in fact
  possible to set by the application.
  
  Suggested by: Jeff Pohlmeyer

Guenter Knauf (7 Aug 2010)
- Block created curlbuild.h for NetWare to avoid usage from other platforms.

Daniel Stenberg (7 Aug 2010)
- RELEASE-NOTES: synced with recent changes

Yang Tse (6 Aug 2010)
- build: ensure that libhostname doesn't get installed

Daniel Stenberg (6 Aug 2010)
- multi_socket: set timeout for 100-continue
  
  When libcurl internally decided to wait for a 100-continue header, there
  was no call to the timeout function so there was no timeout callback
  called when the multi_socket API was used and thus applications became
  either completely wrong or at least ineffecient depending on how they
  handled the situation. We now set a timeout to get triggered.
  
  Reported by: Ben Darnell
  Bug: http://curl.haxx.se/bug/view.cgi?id=3039744

Guenter Knauf (6 Aug 2010)
- Some more Watcom makefile massage ...
  
  For now removed the .autodepend directive until I've figured out
  which of my changes broke it again.

Yang Tse (5 Aug 2010)
- build: fix libssh2_scp_send64() availability

- build: remove unneeded cast to (void *)

- build: remove unused file

Daniel Stenberg (4 Aug 2010)
- SCP: send large files properly with new enough libssh2
  
  libssh2 1.2.6 and later handle >32bit file sizes properly even on 32bit
  architectures and we make sure to use that ability.
  
  Reported by: Mikael Johansson
  Bug: http://curl.haxx.se/mail/lib-2010-08/0052.html

Yang Tse (3 Aug 2010)
- build: add missing new files to non-configure target build files

- md4: replace bcopy usage with memcpy

Daniel Stenberg (3 Aug 2010)
- RELEASE-NOTES: synced with recent changes

- TODO-RELEASE: clear, file not really used ATM

- typecheck-gcc: add checks for recently added options
  
  I added all OBJECTPOINT curl_easy_setopt() options from 178 to 202. Left
  to add: the five FUNCTIONPOINT (callbacks) options added since:
  
  SSH_KEYFUNCTION
  INTERLEAVEFUNCTION
  CHUNK_BGN_FUNCTION
  CHUNK_END_FUNCTION
  FNMATCH_FUNCTION

- .gitignore: ignore all built examples

- example: fix code to build warning-free

- Curl_connected_proxy: skip the bits.tcpconnect check
  
  Simply because the TCP might be connected already we cannot skip the
  proxy connect procedure. We need to be careful to not overload more
  meaning to the bits.tcpconnect field like this.
  
  With this fix, SOCKS proxies work again when the multi interface is
  used. I believe this regression was added with commit 4b351d018e,
  released as 7.20.1.
  
  Left todo: add a test case that verifies this functionality that
  prevents us from breaking it again in the future!
  
  Reported by: Robin Cornelius
  Bug: http://curl.haxx.se/bug/view.cgi?id=3033966

- sethostname: provide local prototype for gethostname
  
  This is only to avoid warnings on some systems.

- build: add typecast to avoid warning
  
  There is an implicit conversion from "unsigned long" to "long";
  rounding, sign extension, or loss of accuracy may result.

Guenter Knauf (2 Aug 2010)
- Rename CURL_SOURCES macro; revert previous rename of curl_SOURCES macro.

- Removed ugly dependency lists since wmake knows the .autodepend directive.

- Use suffix search path for sources in lib folder.

- Changed src/Makefile.Watcom to use CURL_SOURCES from src/Makefile.inc.

- Renamed curl_SOURCES to CURL_ALLFILES to overcome wmake's case-insensitivity.

- Removed wlink from DLL loader list because it doesnt work with Watcom < 1.8.

- Moved the LDAP API defines from Makefile.Watcom to config-win32.h.
  
  These defines are only needed for older Watcom versions (< 1280).

Daniel Stenberg (2 Aug 2010)
- retry: consider retrying even if -f is used
  
  The --retry logic does retry HTTP when some specific response codes are
  returned, but because the -f option sets the CURLOPT_FAILONERROR to
  libcurl, the return codes are different for such situations and then the
  curl tool failed to consider it for retrying.
  
  Reported by: Mike Power
  Bug: http://curl.haxx.se/bug/view.cgi?id=3037362

- multi: fix FTPS connecting the data connection with OpenSSL
  
  Commit 496002ea1cd76af7f (released in 7.20.1) broke FTPS when using the
  multi interface and OpenSSL was used. The condition for the non-blocking
  connect was incorrect.
  
  Reported by: Georg Lippitsch
  Bug: http://curl.haxx.se/mail/lib-2010-07/0270.html

Guenter Knauf (1 Aug 2010)
- Fixed curlbuild.h rule.

- Added rule to create curlbuild.h if not present (for builds from git).

- Added dependend libs for curl static linking.

- Fixed curl.exe static linking.

Daniel Stenberg (30 Jul 2010)
- warning: silence a win64 compiler warning
  
  conversion from 'size_t' to 'curl_socklen_t', possible loss of data
  
  Reported by: Adam Light

- KNOWN_BUG: The SOCKET type in Win64 is 64 bits
  
  The SOCKET type in Win64 is 64 bits large (and thus so is curl_socket_t
  on that platform), and long is only 32 bits. It makes it impossible for
  curl_easy_getinfo() to return a socket properly with the
  CURLINFO_LASTSOCKET option as for all other operating systems.

- smtp_connect: always provide host name buffer
  
  Previously the host name buffer was only used if gethostname() exists,
  but since we converted that into a curl private function that function
  always exists and will be used so the buffer needs to exist for all
  cases/systems.

- sethostname: avoid including unistd.h to duck for warnings

- sethostname: ISO C does not allow extra `;' outside of a function

- [Kamil Dudka brought this change]

  NTLM tests: boost coverage by forcing the hostname
  
  A shared library tests/libtest/.libs/lihostname.so is preloaded in NTLM
  test-cases to override the system implementation of gethostname().  It
  makes it possible to test the NTLM authentication for exact match, and
  this way test the implementation of MD4 and DES.
  
  If LD_PRELOAD doesn't work, a debug build willl also workk as debug
  builds are now made to prefer a specific environment variable and will
  then return that content as host name instead of the actual one.
  
  Kamil wrote the bulk of this, Daniel Stenberg polished it.

Guenter Knauf (29 Jul 2010)
- Added a comment with an alternate idea to avoid the backslash line contination character.

- Changed comparison to match size_t var type.

- Removed unused vars to avoid compiler warnings.

- Make Watcom makefiles use Makefile.inc to reduce future maintainance.
  
  lib/Makefile.Watcom works fine already, for src/Makefile.Watcom we
  need first to tweak src/Makefile.inc a bit - therefore the handtweaked
  list still exists for now.

- Watcom makefiles overhaul.
  
  - make both libcurl and curl makefiles use register calling convention
    (previously libcurl had stack calling convention).
  - added include paths to the Watcom headers so its no longer required
    to set the environment vars for this.
  - added -wcd=201 to supress compiler warning about unreachable code.
  - use macros for all tools, and removed dependency on GNU tools like rm.
  - make ipv6 and debug builds controlable via env vars and so make them
    optional instead of default.
  - commented WINLDAPAPI and WINBERAPI since they broke with OW 1.8, and
    it seems they're not needed (anymore?).
  - added rule for hugehelp.c.cvs so that it will be created when not
    already exist - this is required for building from a release tarball
    since there we have no hugehelp.c.cvs, thus compilation broke.
  - removed C_ARG creation from lib/Makefile.Watcom and use CFLAGS
    directly as done too in src/Makefile.Watcom - this has the benefit
    that we will see all active cflags and defines during compile.
  - added LINK-ARG to src/Makefile.Watcom in order to better control
    linker input.
  - a couple of other minor makefile tweaks here and there ...
  - added largefile support for Watcom builds to config-win32.h. Not yet
    tested if it really works, but should since Win32 supports it.
  - added loaddll stuff to speed up builds if supported.

- some cosmetic changes.

Dan Fandrich (26 Jul 2010)
- Added md4.c to the Watcom makefile

- Added PolarSSL to the docs

Daniel Stenberg (25 Jul 2010)
- curl-config: --built-shared returns shared info
  
  The curl-config now features a --built-shared command line option that
  will output 'yes' or 'no' depending if the build process was asked to
  build shared library/libraries or not.
  
  It is primarily made to offer more details to the test suite to know
  what kind of stunts it can expect to work.

- add_buffer_send: fix compiler warning
  
  Win64's 32 bit long but 64 bit size_t caused a warning that we avoid
  with a typecast. A small whitespace indent fix was also applied.
  
  Reported by: Adam Light

Guenter Knauf (22 Jul 2010)
- Updated library versions.

- Fixed script version which was still based on CVS Revision tag.

Dan Fandrich (21 Jul 2010)
- FAQ: Why doesn't cURL error out when the cable is unplugged?
  
  This one was long overdue to be mentioned in the FAQ. Also, mention the
  new ftp wildcard downloading feature.

Daniel Stenberg (21 Jul 2010)
- [Ben Greear brought this change]

  ssh: Fix compile error on 64-bit systems.
  
  Signed-off-by: Ben Greear <greearb@candelatech.com>

- [Ben Greear brought this change]

  build: Enable configure --enable-werror
  
    This passes -Werror to gcc when building curl and libcurl,
    allowing easy dection of compile warnings.
  
  Signed-off-by: Ben Greear <greearb@candelatech.com>

- [Ben Greear brought this change]

  pingpong: Fix indentation (whitespace change only)
  
  Signed-off-by: Ben Greear <greearb@candelatech.com>

- [Jan Van Boghout brought this change]

  CUSTOMREQUEST: shouldn't be disabled when HTTP is disabled
  
  ... since FTP is using it as well, and potentially other protocols!
  
  Also, an #endif CURL_DISABLE_HTTP was incorrectly marked, as it seems to
  end the proxy block instead.

- [Jan Van Boghout brought this change]

  pingpong: response_time is milliseconds
  
  Fixed the comment/document for the response_time struct member.

- [Jan Van Boghout brought this change]

  ftp: response timeout bug in "quote" sending
  
  The FTP implementation was missing a timestamp reset point, making the
  waiting for responses after sending a post-transfer "QUOTE" command not
  working as supposedly. This bug was introduced in 7.20.0

- [Jeff Pohlmeyer brought this change]

  remote-header-name: chop filename at next semicolon
  
  The --remote-header-name option for the command-line tool assumes that
  everything beyond the filename= field is part of the filename, but that
  might not always be the case, for example:
  
  Content-Disposition: attachment; filename=file.txt; modification-date=...
  
  This fix chops the filename off at the next semicolon, if there is one.

- --retry: access violation with URL part sets continued
  
  When getting multiple URLs, curl didn't properly reset the byte counter
  after a successful transfer so if the subsequent transfer failed it
  would wrongly use the previous byte counter and behave badly (segfault)
  because of that. The code assumes that the byte counter and the 'stream'
  pointer is well in synch.
  
  Reported by: Jon Sargeant
  Bug: http://curl.haxx.se/bug/view.cgi?id=3028241

- releasnote: synch up with commit f3b77e5611d

- [Constantine Sapuntzakis brought this change]

  examples: add curl_multi_timeout
  
  Make the multi-interface using examples use curl_multi_timeout to
  properly educate users how to do things.

- configure: document the STATICLIB variable

- [Constantine Sapuntzakis brought this change]

  multi: fix condition that remove timers before trigger
  
  curl_multi perform has two phases: run through every easy handle calling
  multi_runsingle and remove expired timers (timer removal).
  
  If a small timer (e.g. 1-10ms) is set during multi_runsingle, then it's
  possible that the timer has passed by when the timer removal runs. The
  timer which was just added is then removed. This will potentially cause
  the timer list to be empty and cause the next call to curl_multi_timeout
  to return -1. Ideally, curl_multi_timeout should return 0 in this case.
  
  One way to fix this is to move the struct timeval now = Curl_tvnow(); to
  the top of curl_multi_perform. The change does that.

- [Constantine Sapuntzakis brought this change]

  threaded resolver: fix timeout issue
  
  Reset old timer first so we can set a new one further in the future.

- configure: allow environments variable to override internals
  
  configure checks for grep, egrep, sed and ar and set the variables GREP,
  EGREP, SED and AR accordingly. We now let already set variables override
  the internal choices to let users make decisions when they know the
  right choice already. This is a regression as our configure script used
  to allow this back before commit 0b57c475 (up to 7.18.2).
  
  Reported by: "kdekker"
  Bug: http://curl.haxx.se/bug/view.cgi?id=3028318

Dan Fandrich (9 Jul 2010)
- Improved the Android build instructions

Daniel Stenberg (7 Jul 2010)
- [Tor Arntsen brought this change]

  upload: Avoid infinite loop when checking for auth bits
  
  The test would loop forever if authtype bit 0 wasn't set.

- upload: warn users trying to upload from stdin with anyauth
  
  Since uploading from stdin is very likely to not work with anyauth and
  its multi-phase probing for what authentication to actually use, alert
  the user about it. Multi-phase negotiate almost certainly will involve
  sending data and thus libcurl will need to rewind the stream to send
  again, and it cannot do that with stdin.

- http: don't enable chunked during authentication negotiations
  
  As mentioned in bug report #2956968, the HTTP code wouldn't send the
  first empty chunk during the auth negotiation phase of the HTTP request
  sending, so the server would wait for data to come and libcurl would
  wait for data to arrive... I've made the code not enable chunked
  encoding until the auth negotiation is done and thus this scenario
  doesn't occur anymore.
  
  Reported by: Sidney San Mart韓
  Bug: http://curl.haxx.se/bug/view.cgi?id=2956968

- --libcurl: list the tricky options instead of using [REMARK]
  
  I think the [REMARK] and commented function calls cluttered the code a
  bit too much and made the generated code ugly to read. Now we instead
  track the remarks one specially and just lists them at the end of the
  generated code more as additional information.

- curl: avoid setting libcurl options to its default
  
  it makes the --libcurl output easier to follow.

- --libcurl: hide setopt() calls setting default options
  
  And additionally, don't show function or object pointers actual value
  since they make no sense to anyone. Show 'functionpointer' and
  'objectpointer' instead.

- --libcurl: use *_LARGE options with typecasted constants
  
  In the generated code --libcurl makes, all calls to curl_easy_setopt()
  that use *_LARGE options now have the value typecasted to curl_off_t, so
  that it works correctly for 32bit systems with 64bit curl_off_t type.

- multi: CURLINFO_LASTSOCKET doesn't work after remove_handle
  
  When curl_multi_remove_handle() is called and an easy handle is returned
  to the connection cache held in the multi handle, then we cannot allow
  CURLINFO_LASTSOCKET to extract it since that will more or less encourage
  that the user uses the socket while it can get used by libcurl again.
  
  Without this fix, we'd get a segfault in Curl_getconnectinfo() trying to
  dereference the NULL pointer in 'data->state.connc'.
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3023840

- [Pierre Joye brought this change]

  build: add enable IPV6 option for the VC makefiles

- FAQ: the threaded resolver works universally now

Kamil Dudka (30 Jun 2010)
- http_ntlm: add support for NSS
  
  When configured with '--without-ssl --with-nss', NTLM authentication
  now uses NSS crypto library for MD5 and DES.  For MD4 we have a local
  implementation in that case.  More details are available at
  https://bugzilla.redhat.com/603783
  
  In order to get it working, curl_global_init() must be called with
  CURL_GLOBAL_SSL or CURL_GLOBAL_ALL.  That's necessary because NSS needs
  to be initialized globally and we do so only when the NSS library is
  actually required by protocol.  The mentioned call of curl_global_init()
  is responsible for creating of the initialization mutex.
  
  There was also slightly changed the NSS initialization scenario, in
  particular, loading of the NSS PEM module.  It used to be loaded always
  right after the NSS library was initialized.  Now the library is
  initialized as soon as any SSL or NTLM is required, while the PEM module
  is prevented from being loaded until the SSL is actually required.

Daniel Stenberg (29 Jun 2010)
- glob: backslash escaping bug
  
  curl didn't properly handle escaping characters in a URL with the use of
  backslash. It did an attempt, but that failed as reported in bug
  3022551. The described example was using the URL
  "http://example.com?{AB,C\,D}".
  
  I've now removed the special-handling of letters following the backslash
  and I also removed the bad extra check that triggered this particular
  bug.
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3022551
  Reported by: Jon Sargeant

- release-notes: sync up with recent commits

- CONTRIBUTE: the git commit message line length is 72 columns

- [Pavel Raiskup brought this change]

  ftp wildcard: FTP LIST parser FIX
  
  There was a problem when a UNIX-like server returned information
  about directory size (total NNNNNN) at the first line of
  response.

- [Pavel Raiskup brought this change]

  examples: new FTP wildcard showcase

- multi_socket: re-use of same socket without notifying app
  
  When a hostname resolves to multiple IP addresses and the first one
  tried doesn't work, the socket for the second attempt may get dropped on
  the floor, causing the request to eventually time out. The issue is that
  when using kqueue (as on mac and bsd platforms) instead of select, the
  kernel removes the first fd from kqueue when it is closed (in trynextip,
  connect.c:503). Trynextip() then goes on to open a new socket, which
  gets assigned the same number as the one it just closed. Later in
  multi.c, socket_cb is not called because the fd is already in
  multi->sockhash, so the new socket is never added to kqueue.
  
  The correct fix is to ensure that socket_cb is called to remove the fd
  when trynextip() closes the socket, and again to re-add it after
  singleipsocket(). I'm not sure how to cleanly do that, but the attached
  patch works around the problem in an admittedly kludgy way by delaying
  the close to ensure that the newly-opened socket gets a different fd.
  
  Daniel's added comment: I didn't spot a way to easily do a nicer fix so
  I've proceeded with Ben's patch.
  
  Bug: http://curl.haxx.se/bug/view.cgi?id=3017819
  Patch by: Ben Darnell

Kamil Dudka (24 Jun 2010)
- [Pavel Raiskup brought this change]

  ftp-wildcard: avoid tight loop when used without any pattern
  
  It was broken for URLs like "ftp://example.com/".

Daniel Stenberg (21 Jun 2010)
- maketgz: produce CHANGES automatically with the 1000 most recent commits
  
  It passes the git log output through 'log2changes.pl' to produce
  the lot.

- ignore: CHANGES.dist gets generated by maketgz

- CHANGES: move all contents from CHANGES to CHANGES.0
  
  CHANGES is no longer used for manually edited content. It is to
  be generated automatically by maketgz when we make release
  tarballs.

- log2changes: correct command line, fix tag usage, change Version output
  
  --decorate=full is needed with my git 1.7.1 to get the necessary
  output so that the previous edit would work to extract the
  Version stuff.
  
  ... but I had to edit how the refs/tags was extracted since it
  had a little flaw that made it miss the 7.20.1 output.
  
  Finally, I changed so that Version is outputted even more similar
  to how CHANGES does it.

Dan Fandrich (21 Jun 2010)
- Make the output of log2changes.pl even more closely match CHANGES
  
  Add the ASCII art header, and list version commits by decoding
  the ref tag names, when available (using the git log --decorate
  option).

Daniel Stenberg (19 Jun 2010)
- log2changes: first version of the git log to CHANGES conversion script
  
  $ git log --pretty=fuller --no-color --date=short | ./log2changes.pl
  
  Of course, limiting the log output with a range like with
  "[tag]..HEAD" appended can be very useful too.

- sendrecv: treat all negative values from send/recv as errors
  
  For example the libssh2 based functions return other negative
  values than -1 to signal errors and it is important that we catch
  them properly. Right before this, various failures from libssh2
  were treated as negative download amounts which caused havoc.

- multi: prevent NULL pointer dereference
  
  My additional call to Curl_pgrsUpdate() would sometimes get
  called even though there's no connection (left) so a NULL pointer
  would get passed, causing a segfault.

- smtp: fixed a few uses of size_t that seemed to believe it was signed
  
  Reported-by: Steven M. Schweda

Dan Fandrich (17 Jun 2010)
- Fixed an OOM memory leak in the FTP wildcard code

Kamil Dudka (17 Jun 2010)
- test575: do not fail with threaded DNS resolver

Daniel Stenberg (17 Jun 2010)
- [Krister Johansen brought this change]

  multi: unmark handle as used when no longer head of pipeline

- multi: call the progress function only once and allow abort
  
  1) no need to call the progress function twice when in the
  CURLM_STATE_TOOFAST state.
  
  2) Make sure that the progress callback's return code is
  acknowledged when used

- multi: call the progress callback in all states
  
  As long as no error is reported, the progress function can get
  called. This may be a little TOO often so we should keep an eye
  on this and possibly make this conditional somehow.
